Daakro XY-T1002P 2 Channel Bluetooth Ampલિફાયર બોર્ડ સૂચના માર્ગદર્શિકા

પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of the Daakro XY-T1002P 2 Channel Bluetooth Amplifier Board. Please read this manual thoroughly before using the product to ensure proper function and safety.

Image: The Daakro XY-T1002P amplifier board connected to two speakers, demonstrating its 2.0 channel audio output capability.

સલામતી માહિતી

ઉપકરણને ઇલેક્ટ્રિક આંચકો, આગ અથવા નુકસાન અટકાવવા માટે નીચેની સલામતી સાવચેતીઓનું પાલન કરો:

• પાવર સપ્લાય વોલ્યુમની ખાતરી કરોtage 12-30V DC ની નિર્દિષ્ટ શ્રેણીમાં છે.
• ઉપકરણને ભેજ અથવા આત્યંતિક તાપમાનમાં ખુલ્લું પાડશો નહીં.
• આઉટપુટ ટર્મિનલ્સને શોર્ટ-સર્કિટ કરવાનું ટાળો.
• ડિસએસેમ્બલ અથવા સંશોધિત કરશો નહીં ampલિફાયર બોર્ડ.
• બાળકોની પહોંચથી દૂર રાખો.
• કોઈપણ જોડાણો અથવા ગોઠવણો કરતા પહેલા પાવર ડિસ્કનેક્ટ કરો.

ઉત્પાદન ઓવરview

The Daakro XY-T1002P is a 2-channel Bluetooth amplifier board designed for DIY audio projects, offering 100W+100W peak power output. It features a TPA3221 HiFi chip for high-fidelity sound and supports multiple audio input options.

છબી: વિગતવાર view ના ampલાઇફાયર બોર્ડ, શોકasing its premium-grade components such as high-capacity capacitors, digital amplifier-specific inductors, solid-state capacitors, Bluetooth chip, TI NE5532 chips, and large heat sinks.

મુખ્ય લક્ષણો:

• Dual TPA3221 HiFi Chip: Provides ultra-high resolution and low distortion audio.
• 2.0 Channel Output: 100W + 100W power output.
• બહુવિધ ઑડિઓ ઇનપુટ્સ: Bluetooth 5.2, AUX (3.5mm), USB Flash Drive, USB Sound Card.
• Multi-Function Master Volume Knob: Controls volume, play/pause, track skipping, and mode switching.
• સૂચક લાઇટ્સ: Green for USB, Red for AUX, Blue for Bluetooth mode.
• Treble and Bass Adjustment: Independent knobs for sound customization.

છબી: એક કોણીય view ના amplifier board, showing the layout of the control knobs and input/output terminals.

સેટઅપ સૂચનાઓ

Follow these steps to correctly set up your Daakro XY-T1002P ampલિફાયર બોર્ડ.

Image: A detailed diagram illustrating the various connection points on the amplifier board, including power input, speaker outputs, 3.5mm audio input, USB input, and the multi-function knob.

1. પાવર કનેક્શન:

• Connect a DC power supply (12-30V) to the "POWER DC 12-30V" input terminals. Ensure correct polarity (+ and -).
• Alternatively, use a 5.5-2.5mm DC jack if your power supply has one.
• મહત્વપૂર્ણ: Ensure the power switch is in the "OFF" position before connecting power.

2. સ્પીકર કનેક્શન:

• Connect your passive speakers to the "SPEAKERS" output terminals.
• Connect the left speaker to the "L+" and "L-" terminals.
• Connect the right speaker to the "R+" and "R-" terminals.
• Ensure proper polarity for optimal sound quality.

3. Audio Input Connection:

આ amplifier supports three main audio input methods:

• બ્લૂટૂથ: For wireless connection from smartphones, tablets, or computers.
• AUX: For wired connection via a 3.5mm audio jack from devices like TVs, computers, or MP3 players.
• યુએસબી: ઑડિઓ ચલાવવા માટે files directly from a USB flash drive or using the board as a USB sound card for a computer.

Image: An illustration demonstrating the various audio input options available on the amplifier board, including Bluetooth, 3.5mm AUX, and USB, with exampસુસંગત ઉપકરણોની સંખ્યા.

4. Optional External Bluetooth Antenna:

The board includes a 1st Gen IPEX interface for an optional external Bluetooth antenna (purchased separately) to enhance Bluetooth signal reception.

છબી: ક્લોઝ-અપ view of the 1st Gen IPEX interface on the amplifier board, where an optional external Bluetooth antenna can be connected.

ઓપરેટિંગ સૂચનાઓ

1. પાવર ચાલુ/બંધ:

Locate the power switch on the side of the board. Flip it to the "ON" position to power on the amplifier. Flip it to "OFF" to power off.

Image: A close-up of the power switch, clearly showing the "ON" and "OFF" positions for controlling the ampલિફાયરની શક્તિ.

2. Mode Selection and Indicator Lights:

આ amplifier board features three indicator lights to show the current input mode:

• લીલો પ્રકાશ: Indicates USB mode.
• લાલ પ્રકાશ: Indicates AUX mode.
• વાદળી પ્રકાશ: Indicates Bluetooth mode.

To switch modes, quadruple-click the multi-function master volume knob.

છબી: ક્લોઝ-અપ view of the three indicator lights (USB, AUX, BT) on the amplifier board, which illuminate to show the active audio input mode.

3. Multi-Function Master Volume Knob:

This knob controls various audio functions:

• ફેરવો: એકંદર વોલ્યુમ સ્તરને સમાયોજિત કરે છે.
• સિંગલ ક્લિક: Pauses or plays audio.
• ડબલ ક્લિક કરો: આગામી ટ્રેક પર જાઓ.
• ટ્રિપલ ક્લિક: Returns to the previous track.
• Quadruple Click: Switches between input modes (USB, AUX, Bluetooth).
• લાંબા પ્રેસ: ઉપકરણને ચાલુ/બંધ કરે છે.

છબી: ક્લોઝ-અપ view of the three control knobs on the amplifier board, used for master volume, treble adjustment, and bass adjustment.

4. બ્લૂટૂથ પેરિંગ:

1. ખાતરી કરો amplifier is powered on and in Bluetooth mode (blue indicator light).
2. On your device (smartphone, tablet), enable Bluetooth and search for available devices.
3. Select "XY-T1002P" from the list to pair.
4. Once paired, the blue indicator light may become solid or flash differently depending on the connection status.

5. AUX ઇનપુટ:

Connect your audio source to the 3.5mm AUX input jack. Switch the amplifier to AUX mode (red indicator light) using the multi-function knob.

6. USB Input:

ઑડિયો ધરાવતી USB ફ્લેશ ડ્રાઇવ દાખલ કરો files into the USB port. Switch the amplifier to USB mode (green indicator light). The amplifier will automatically detect and play compatible audio files (WAV, FLAC, APE, MP3). For USB sound card functionality, connect the amplifier to your computer via a USB cable and select it as the audio output device.

7. Treble and Bass Adjustment:

Use the dedicated "TREBLE" and "BASS" knobs to fine-tune the high and low frequencies of your audio output to your preference.

જાળવણી

• સફાઈ: ની સપાટીને સાફ કરવા માટે નરમ, શુષ્ક કાપડનો ઉપયોગ કરો amplifier board. Do not use liquid cleaners or solvents.
• સંગ્રહ: ઉપયોગમાં ન હોય ત્યારે ઉપકરણને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
• વેન્ટિલેશન: આસપાસ પર્યાપ્ત વેન્ટિલેશનની ખાતરી કરો amplifier board during operation to prevent overheating.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

નોંધ: પર્યાપ્ત વોલ્યુમtage and current input are required for optimal power output. Higher voltage and current generally result in higher power. Under the same conditions, a smaller speaker impedance yields greater power.

Image: A table detailing the power output of the amplifier board at different input voltages and speaker impedances.

Image: A diagram showing the physical dimensions of the amplifier board, including length, width, and height, along with knob cap length and product weight.

વોરંટી અને આધાર

For warranty information and technical support, please refer to the seller's policy or contact Daakro customer service through the platform where the product was purchased. Keep your purchase receipt for warranty claims.