AUTOMATE Control4 Pulse Pro Hub
ઓટોમેટ પલ્સ પ્રો ઓવરVIEW
Elevate your Automate experience by seamlessly integrating Automate motorized shades with CONTROL4 Smart Home systems. The Automate Pulse PRO Hub offers a powerful integration with discrete shade control and two-way communication, providing real-time updates on shade position and battery levels. Featuring both Ethernet (CAT 5) and 2.4GHz wireless connectivity, the Pulse PRO Hub ensures smooth home automation integration through an easy-to-access RJ45 port located on the back of the hub. Each hub supports up to 30 shades, making it a versatile solution for any home automation setup.
ઓવરVIEW:
| Control4 Version Required | 2.9.0 ન્યૂનતમ |
| વિકાસકર્તા | જોડાણ 4 |
| પ્રારંભિક પ્રકાશન તારીખ | 5/28/2019 |
| Last Modified Date | 1/24/2025 |
| આધાર ઇમેઇલ | ustechsupport@rolleaseacmeda.com |
નોંધ: For support of real time updates the annex4 Link driver is required. You can find the driver at: https://annex4.link/drivers/link
હાર્ડવેર ઇન્સ્ટોલેશન
- Install all shades/blinds/motors at desired locations
- Connect the Hub to the Automate Pulse app
- Connect all shades/blinds/motors to the Automate Pulse app
ડ્રાઇવ ઇન્સ્ટોલેશન
- Place the “Automate Pulse PRO Hub” driver into the project.
- Navigate to the Connections section and select the Network tab.
- Enter the IP address of the Automate Pulse PRO Hub.
- Confirm that shades have been detected by looking at the Detected Drivers property.
- For each shade that the “Automate Pulse Hub” has added to the connections add an “Automate Pulse Shade” driver to the project.
- Bind the “Automate Pulse Shade” drivers to the “Automate Pulse Hub”.
- a) Once the connection has been bound the driver will automatically populate shade properties.
- Set the ‘Shade Movement Type’ to ‘Move’ or ‘Rotate’ to determine what the driver should control.
- a) ‘Move’ will control basic shade movement.
- b) ‘Rotate’ will control the motor rotation.
- Run the ‘Calibrate’ action on the shade, this will prepare the driver to calculate the travel times of the shades. By doing this the driver will accurately display ramp rates for a better user experience.
- Refresh Navigators.
નોંધ: Grayed out sections are part of the hub driver installation.
This driver is an Interface Controller for the Rollease Acmeda Automate Pulse PRO Hub. It allows IP control over Rollease shades from CONTROL4.
DRIVE FOR THE MOTOR
SUPPORTED FEATURES:
- Drag and drop installation
- Easy calibration of shade travel time
- Control of motor rotation and shade movement
ગુણધર્મો:
ક્રિયાઓ:
જોડાણો:
FOR THE HUB
SUPPORTED FEATURES:
- Simple installation of the hub driver by connecting the network connection;
- Automatically calculates the travel time of the motors accurate to within 50ms;
ગુણધર્મો:
ક્રિયાઓ:
CONNETIONS:
COMMOMS MISTAKES:
- "IP સરનામું" રૂપરેખાંકન લાઇનમાં ખોટો IP સરનામું દાખલ કરવો.
- જો તમે ઉપકરણો શોધવામાં નિષ્ફળ રહ્યા છો, તો આ બે વાર તપાસો!
CONTROL4 SYSTEM CONNECTION:
વારંવાર પૂછાતા પ્રશ્નો
પ્ર. કોઈ પલ્સ પ્રો હબ મળ્યું નથી.
A. ખાતરી કરો કે તમારું ઓટોમેટ પલ્સ પ્રો યોગ્ય નેટવર્ક સાથે જોડાયેલ છે અને ઓટોમેટ શેડ્સ એપનો ઉપયોગ કરીને ઉપલબ્ધ IP સરનામું મેળવો અને નેટવર્ક સાથે વાતચીત કરી રહ્યું છે.
પ્ર. શેડની મર્યાદા યોગ્ય રીતે સેટ કરેલી નથી.
A. Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within CONTROL4 SYSTEM.
પ્ર. છાંયો જરા પણ ખસતો નથી.
A. Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the CONTROL4 System connections tab between the Pulse PRO Hub and Shade drivers.
Q. I have multiple Pulse PRO Hubs, what do I do?
A. Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse PRO Hubs - select the desired one.
Q. I don’t see any shade bindings in the Pulse PRO Hub driver?
A. ડ્રાઇવર ક્રિયાઓ ટેબમાં સ્થિત "શેડ્સ પુનઃપ્રાપ્ત કરો" પસંદ કરો.
Q. How do I scan for available Automate Pulse PRO Hubs?
A. Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.
સહાયક સંસાધનો:
વધુ સહાયતા માટે, તમારા રિટેલરનો સંપર્ક કરો, અમારી મુલાકાત લો webપર સાઇટ www.rolleaseacmeda.com.
rolleaseacmeda.com
0 2025 રોલેઝ એકમેડા ગ્રુપ
દસ્તાવેજો / સંસાધનો
 |
AUTOMATE Control4 Pulse Pro Hub [પીડીએફ] વપરાશકર્તા માર્ગદર્શિકા Control4 Pulse Pro Hub, Pulse Pro Hub, Hub |