પરિચય
Thank you for choosing the Kemei KM-1990 Professional Hair Clipper. This manual provides detailed instructions for the safe and effective use, maintenance, and care of your new hair clipper. Please read this manual thoroughly before first use and keep it for future reference.
The Kemei KM-1990 is a versatile electric trimmer designed for professional and home use, featuring a powerful motor, patented angular blade, and an intuitive LCD display for battery status and turbo mode.
પેકેજ સામગ્રી
પેકેજ ખોલતી વખતે, કૃપા કરીને ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ હાજર છે અને સારી સ્થિતિમાં છે:
- Kemei KM-1990 Hair Clipper
- ચાર્જિંગ કેબલ
- સફાઈ બ્રશ
- લુબ્રિકેટિંગ તેલ
- માર્ગદર્શક કોમ્બ્સ (વિવિધ કદ)
- Hairdressing Cape
- Scissors (hair cutting and thinning)
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
For a visual guide to the package contents, please watch the unboxing video below:
સેટઅપ અને પ્રારંભિક ઉપયોગ
1. Charging the Clipper
The Kemei KM-1990 hair clipper is rechargeable and can be used cordlessly. Before first use, or when the battery indicator on the LCD display shows low charge, fully charge the device.
- Connect the charging cable to the clipper and a suitable power adapter (AC 110-240V, 50-60Hz).
- The LCD display will show the charging progress.
- A full charge takes approximately 3 hours. The clipper can work for about 120 minutes after a full charge.
2. Blade Alignment (Factory Set)
Your shears are carefully inspected to ensure that the blades are oiled and aligned before they leave the factory. If the blades are removed for cleaning or replacement, they must be re-aligned. To re-align:
- Simply match the top and bottom blade teeth point to point upwards.
- The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade.
- Compare your scissor blades with the provided sketch (if available).
- If the blades are not aligned correctly, put a few drops of oil on the blades, turn the shears open for a while, close, and unplug them.
- Loosen the screw slightly and make adjustments until the blades are aligned, then tighten the screw.
3. માર્ગદર્શિકા કાંસકો જોડવો
Select the desired guide comb for your preferred cutting length. The clipper comes with various sizes, including 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 19mm, and 25mm.
- ખાતરી કરો કે ક્લિપર બંધ છે.
- Align the guide comb with the clipper blade and push it firmly until it clicks into place.
- દૂર કરવા માટે, કાંસકોને બ્લેડથી હળવેથી ખેંચો.
ઓપરેટિંગ સૂચનાઓ
1. પાવર ચાલુ/બંધ અને મોડ પસંદગી
- ક્લિપર ચાલુ કે બંધ કરવા માટે પાવર બટન દબાવો.
- The LCD display will show the battery percentage and current mode.
- The clipper features a powerful motor with both Standard and Strong (Turbo) modes. Use the appropriate button to switch between modes as needed for different hair types or cutting tasks.
2. Hair Cutting Techniques
The Kemei KM-1990 is suitable for various cutting styles, including wet and dry haircuts, electric length adjustment, sculpting, pushing white, and gradual trimming.
- Always start with a longer guide comb than you think you need, and gradually reduce the length.
- Hold the clipper flat against the head and move it slowly against the direction of hair growth.
- For detailed work or fading, use the clipper without a guide comb, adjusting the blade lever for precise cutting lengths (1.1mm - 2mm minimum cutting length).
- The clipper features automatic power selection based on bristle density, ensuring consistent performance.
જાળવણી અને સંભાળ
1. બ્લેડ સાફ કરવું
- After each use, turn off the clipper and remove the guide comb.
- બ્લેડમાંથી છૂટા વાળ દૂર કરવા માટે આપેલા સફાઈ બ્રશનો ઉપયોગ કરો.
- The blades are designed for washing under water. You can rinse the blade assembly under running water. Ensure the clipper body is not submerged.
- Allow the blades to air dry completely before reattaching or storing.
2. Oiling the Blades
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly:
- Ensure the clipper is clean and dry.
- Apply a few drops of the provided lubricating oil across the top of the blades.
- તેલ સરખી રીતે વિતરિત કરવા માટે ક્લિપરને થોડી સેકન્ડ માટે ચાલુ કરો.
- કોઈપણ વધારાનું તેલ નરમ કપડાથી સાફ કરો.
3. સંગ્રહ
ક્લિપરને ઠંડી, સૂકી જગ્યાએ, સીધા સૂર્યપ્રકાશ અને ભેજથી દૂર રાખો. તેને બાળકોની પહોંચથી દૂર રાખો.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ક્લિપર ચાલુ થતું નથી. | બેટરી ઓછી છે અથવા ચાર્જ નથી. | Charge the clipper fully (approx. 3 hours). Ensure the charging cable is properly connected. |
| ક્લિપર વાળ ખેંચે છે અથવા અસમાન રીતે કાપે છે. | Blades are dull, dirty, or misaligned. Insufficient oil. | Clean and oil the blades. Check blade alignment and adjust if necessary. If blades are dull, consider replacement. |
| Clipper runs slowly or with reduced power. | Low battery or hair buildup in the motor. | Charge the clipper. Clean the blades and ensure no hair is obstructing the motor area. |
If you encounter issues not listed here, please refer to the full user manual PDF or contact customer support.
વિશિષ્ટતાઓ
| લક્ષણ | વિગત |
|---|---|
| મોડલ | કેએમ-એક્સ્યુએનએક્સ |
| પાવર સપ્લાય | Rechargeable (Mains and battery operation) |
| શક્તિ | 5W |
| ભાગtage | AC 110-240V (<20V internal operating voltage) |
| આવર્તન | 50-60Hz |
| બેટરી ચાર્જિંગ સમય | Approx. 3 hours (up to 2 hours mentioned in product properties) |
| Battery Life / Use Time | Approx. 120 minutes (over 90 minutes mentioned in product properties) |
| બ્લેડ સામગ્રી | સ્ટેનલેસ સ્ટીલ |
| મોટરનો પ્રકાર | રોટરી |
| કાર્યો | Electric length adjustment, wet haircut, dry haircut, automatic power selection based on bristle density, washing knives under water, fast charging, charging indication |
| ન્યૂનતમ કટીંગ લંબાઈ | ૧.૫ - ૧૦ મીમી |
| મહત્તમ કટીંગ લંબાઈ | ૧.૫ - ૧૦ મીમી |
| લંબાઈ ગોઠવણ પદ્ધતિ | નોઝલ બદલવું |
| નોઝલની સંખ્યા | 5 અથવા વધુ ટુકડાઓ |
| હેતુ | For beard and mustache, for the head |
| સામગ્રી | ABS+મેટલ |
| પ્રમાણપત્રો | 3C, CE, CCC |
વોરંટી અને આધાર
The following guarantees are offered for the product:
- The product is manufactured and inspected through strict quality control.
- If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair centre in accordance with the warranty card. (Batteries and blades are consumables and are not included in the warranty and are subject to payment).
Free service will not be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage વિસંગતતાઓ.
- Due to neglect of product specifications.
For more detailed information, please refer to the official user manual PDF: Kemei KM-1990 User Manual (PDF)
વપરાશકર્તા ટીપ્સ
- Pre-trimming: For very long hair, it's often helpful to trim it roughly with scissors before using the clipper to avoid clogging and ensure a smoother cut.
- સ્વચ્છતા મુખ્ય છે: Regularly clean and oil your clipper blades to maintain sharpness and prolong the life of the device. This prevents pulling and ensures a smooth cut.
- બેટરી મેનેજમેન્ટ: Keep an eye on the LCD battery display. Charging the clipper before it completely drains can help maintain battery health over time.
- Experiment with Guards: Don't be afraid to try different guide comb sizes to find the perfect length for your desired style.
