VEKOOTO ડિજિટલ વાયરલેસ ફોર્કલિફ્ટ કેમેરા સિસ્ટમ વપરાશકર્તા માર્ગદર્શિકા

પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of your VEKOOTO Digital Wireless Forklift Camera System. This system is designed to enhance visibility and safety during forklift operations, featuring a robust, waterproof camera with a magnetic base and a high-capacity battery bank for wireless, portable use.

પેકેજ સામગ્રી

કૃપા કરીને ચકાસો કે તમારા પેકેજમાં બધી વસ્તુઓ હાજર છે:

• મેગ્નેટિક બેઝ સાથે 1x ફોર્કલિફ્ટ કેમેરા
• 1x Battery Bank with Magnetic Base
• 1x યુએસબી ચાર્જિંગ કેબલ

Note: A 7-inch AHD Wireless Monitor (not explicitly listed in the provided package contents but shown in product images) is typically required for viewing the camera feed and is assumed to be part of the complete system.

Image: Components of the VEKOOTO Digital Wireless Forklift Camera System, including the camera and battery bank.

સેટઅપ માર્ગદર્શિકા

1. Charging the Battery Bank

Before initial use, fully charge the 9600mA battery bank using the provided USB charging cable. The battery bank features built-in over-current and thermal protection for safe charging. It supports DC5V/9V/12V USB fast charging.

2. Camera and Battery Connection

Connect the forklift camera to the battery bank. Ensure a secure connection.

Image: Diagram illustrating the connection between the forklift camera and the 9600mA battery bank with magnetic base.

3. Mounting the Camera System

The camera and battery bank are equipped with magnetic bases for easy, wire-free installation. Simply place the magnetic forklift camera and battery bank onto a suitable iron surface on the forklift, such as an arm or frame. The strong magnets will firmly attach the components.

4. Monitor Pairing (if applicable)

If using a separate wireless monitor (e.g., a 7-inch AHD Wireless Monitor), refer to the monitor's specific instructions for pairing with the camera. Ensure the camera and monitor are powered on and within range for successful connection. The wireless signal can reach up to 100 meters in an open area.

ઓપરેટિંગ સૂચનાઓ

1. પાવર ચાલુ/બંધ

Locate the power button on the battery bank. Press and hold to power on or power off the camera system. The camera will automatically transmit its feed wirelessly to the paired monitor.

2. Viewing the Feed

Once powered on and paired, the camera's front view will be displayed on your AHD wireless monitor. Adjust the camera's position as needed to achieve the desired viewing angle for forklift operations.

3. Recording Features

The system supports a Loop-Cycle Recording Feature. If a memory card is installed (Class 10 recommended), the camera will continuously record, overwriting the oldest footage when the card is full. Refer to your monitor's interface for specific recording controls.

4. Touch Screen Interaction

If your monitor features a touch screen, you can interact with the display for menu navigation, playback, and settings adjustments. Consult your monitor's manual for detailed touch screen functionalities.

જાળવણી

સફાઈ

The camera is IP69K and P68 waterproof, making it suitable for outdoor use and resistant to dust and high-pressure water jets. However, for optimal performance, regularly clean the camera lens with a soft, damp cloth to remove any dirt or debris that may obstruct the view. Do not use harsh chemicals.

બેટરી કેર

To prolong battery life, avoid fully discharging the battery frequently. Recharge the battery bank promptly when the charge is low. Store the battery in a cool, dry place when not in use for extended periods.

પર્યાવરણીય પરિસ્થિતિઓ

The camera is designed to operate in a wide temperature range, from -20°C to 65°C. While robust, extreme and prolonged exposure to temperatures outside this range should be avoided to prevent potential damage.

Image: Visual representation of the camera's IP69K waterproof rating, 6-glass lens, and operating temperature range from -20°C to 65°C.

મુશ્કેલીનિવારણ

• મોનિટર પર કોઈ છબી નથી:
  • Ensure both the camera system and monitor are powered on.
  • Check battery levels of the camera system.
  • Verify that the camera and monitor are properly paired and within wireless range (up to 100m in open areas).
  • Check for any physical obstructions between the camera and monitor that might interfere with the wireless signal.
• નબળી છબી ગુણવત્તા:
  • કેમેરા લેન્સ સાફ કરો.
  • Ensure the camera is securely mounted and not vibrating excessively.
  • Check for strong electromagnetic interference in the operating environment.
• રેકોર્ડિંગ સમસ્યાઓ:
  • Ensure a compatible Class 10 memory card is inserted correctly.
  • Check if the memory card is full; the loop recording feature should manage this, but a faulty card could cause issues.
  • Format the memory card if problems persist (this will erase all data).
• બેટરી ચાર્જ થતી નથી:
  • Verify the USB charging cable is properly connected to both the battery bank and a power source.
  • એક અલગ USB કેબલ અથવા પાવર એડેપ્ટર અજમાવો.
  • ખાતરી કરો કે પાવર સ્ત્રોત કાર્યરત છે.

વિશિષ્ટતાઓ

Image: Details on the portable lithium electronic battery with fast charging capabilities and the 7-inch AHD Wireless Monitor's 100m signal range.

વપરાશકર્તા ટીપ્સ

• Always ensure the battery is sufficiently charged before starting operations to avoid interruptions.
• Periodically check the magnetic mount for secure attachment, especially in environments with heavy vibrations.
• For optimal wireless performance, try to minimize obstacles between the camera and the monitor.

વોરંટી અને આધાર

Your VEKOOTO Digital Wireless Forklift Camera System comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.