પરિચય
Thank you for choosing the CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack. This versatile 3-in-1 device combines a powerful jump starter, a rapid USB charger, and a multi-mode LED light, designed for convenience and reliability. This manual provides essential information for the safe and effective use of your device.
Figure 1: CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack with included accessories.
મહત્વપૂર્ણ સલામતી માહિતી
WARNING: Read the entire instruction manual before using this product to prevent serious injury or damage.
- Do not use this product if it is damaged, wet, or not fully charged.
- Do not attempt to jump start a frozen, severely discharged, or damaged battery.
- Avoid using the product if the battery is leaking, hot, swollen, discolored, corroded, or emitting any unusual sounds or odors.
- કામ કરતી વખતે યોગ્ય વેન્ટિલેશનની ખાતરી કરો.
- બાળકોની પહોંચથી દૂર રાખો.
- Consult a medical professional if you have a pacemaker or other medical device before use.
Figure 2: Back of the device with quick instructions and safety warnings.
પેકેજ સામગ્રી
ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:
- (1) CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack
- (1) 12V DC Car Charger
- (1) USB-C ચાર્જિંગ કેબલ
- (1) Carrying Case with Built-in Cable Storage
- (1) User Manual (this document)
સેટઅપ અને પ્રારંભિક ચાર્જિંગ
પ્રારંભિક ચાર્જ
Before first use, fully charge the jump starter. It is recommended to fully charge the unit after each use and every 3-6 months when not in use to maintain battery health.
- Using 12V DC Car Charger: Connect the 12V DC car charger to the jump starter and then to your vehicle's 12V accessory outlet. Charging time is approximately 4 hours.
- Using USB-C Charging Cable: Connect the USB-C cable to the jump starter and a compatible USB power adapter (not included). Charging time is approximately 7-8 hours.
The battery indicator lights on the device will show the charging progress and current battery level.
ઓપરેટિંગ સૂચનાઓ
વાહન શરૂ કરીને સીધા આના પર જાઓ
The CMXCESM262 is designed to jump start vehicles with up to 10.0L gas engines and 8.0L diesel engines. It is compatible with standard, AGM, gel, and deep-cycle batteries.
- કનેક્ટ કરો: Ensure the jump starter is sufficiently charged. Connect the red clamp to the positive (+) terminal of the vehicle's battery and the black clamp to a metal part of the vehicle's chassis (away from the battery and fuel lines) or the negative (-) terminal if safe to do so.
- પ્રારંભ: Turn on the jump starter. Attempt to start the vehicle. If the vehicle does not start immediately, wait a few minutes and try again. The device features Schumacher’s Pre-Heating Technology for reliable starts in freezing temperatures and Pre-Boost for deeply discharged batteries.
- દૂર કરો: Once the vehicle starts, immediately disconnect the black clamp, then the red clamp, from the vehicle.
Figure 3: Engine compatibility chart for gasoline and diesel vehicles.
Using as a Portable Power Pack (USB Charger)
The device includes a 2.4A USB port for charging smartphones and other USB-powered devices. This port delivers ultra-fast charging, up to 2x faster than standard USB ports.
- Connect your device's USB charging cable to the jump starter's USB port.
- The jump starter can provide power for up to 50 jump starts on a single charge, or extended use as a power bank.
એલઇડી લાઇટનો ઉપયોગ
The built-in LED light offers three modes for various situations:
- સ્થિર: સામાન્ય રોશની માટે.
- Flashing (SOS): ઈમરજન્સી સિગ્નલિંગ માટે.
- સ્ટ્રોબ: For attracting attention.
To cycle through the modes, press the light button repeatedly.
Figure 4: The 3-in-1 multifunctional power source with LED light activated.
જાળવણી
- રિચાર્જિંગ: Always recharge the unit after each use. For optimal battery life, recharge every 3-6 months even when not in use.
- સફાઈ: Keep the unit clean and free from dirt, dust, and moisture. Use a dry cloth to wipe the exterior.
- સંગ્રહ: Store the jump starter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. The device is designed to work in extreme temperatures from -4°F to 140°F (-20°C to 60°C), but storage in moderate conditions is recommended for longevity.
Figure 5: The jump starter is designed for reliable operation in a wide range of temperatures.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| યુનિટ ચાલુ થતું નથી. | બેટરી ખતમ થઈ ગઈ છે. | Recharge the unit fully using either the 12V DC car charger or USB-C cable. |
| વાહન જમ્પ સ્ટાર્ટ થતું નથી. | Incorrect connection; Vehicle battery too damaged/frozen; Unit not fully charged; Engine size exceeds capacity. | Cl ની ખાતરી કરોamps are correctly connected (red to positive, black to chassis/negative). Check unit's charge level. Refer to engine compatibility chart. Do not attempt to jump start frozen or severely damaged batteries. |
| USB ઉપકરણ ચાર્જ થઈ રહ્યું નથી. | USB cable faulty; Unit battery depleted; USB device incompatible. | Try a different USB cable. Recharge the jump starter. Ensure your device is compatible with standard USB charging. |
| એલઇડી લાઇટ કામ કરતી નથી. | Unit battery depleted; Light function not activated. | Recharge the unit. Press the light button to activate and cycle through modes. |
| Unit is hot, swollen, or emitting odor. | Internal battery issue. | Immediately discontinue use and contact customer support. Do NOT attempt to repair. |
વિશિષ્ટતાઓ
| લક્ષણ | વિગત |
|---|---|
| મોડલ | Cmxcesm262 |
| પીક Ampઇરેજ | 2500 Amps |
| ભાગtage | 12 વોલ્ટ |
| બેટરીનો પ્રકાર | લિથિયમ આયન |
| બેટરી ક્ષમતા | 13400 મિલીamp કલાક |
| એન્જિન સુસંગતતા (ગેસ) | 10.0L સુધી |
| એન્જિન સુસંગતતા (ડીઝલ) | 8.0L સુધી |
| યુએસબી આઉટપુટ | 2.4A |
| ઓપરેટિંગ તાપમાન | -4°F થી 140°F (-20°C થી 60°C) |
| પરિમાણો (D x W x H) | 3.8 x 6 x 9.3 ઇંચ |
| વસ્તુનું વજન | 2.3 પાઉન્ડ |
| Charging Time (12V DC) | આશરે. 4 કલાક |
| ચાર્જિંગ સમય (USB-C) | આશરે. 7-8 કલાક |
વપરાશકર્તા ટીપ્સ
- Always ensure the jump starter is fully charged before heading out, especially for long trips or in cold weather.
- cl રાખોamps clean and free of corrosion for optimal conductivity.
- When jump starting, connect the clamps firmly to ensure a good connection.
- Utilize the LED light's SOS or strobe mode in emergency situations to enhance visibility.
- Store the unit in its protective case to prevent damage.
વોરંટી અને આધાર
For warranty information, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. If you encounter any issues not covered in this manual, or require further assistance, please contact CRAFTSMAN customer support.
Manufacturer: CRAFTSMAN
મોડેલ: CMXCESM262
