1. પરિચય
This manual provides essential information for the safe and effective use of your wolfcraft 2144000 Mounted Stone Set. Please read these instructions carefully before operation and retain them for future reference.
ઉત્પાદન ઓવરview
The wolfcraft Mounted Stone Set is designed for grinding and finishing various materials, including metals, glass, ceramics, and plastics. The set includes five mounted stones of different shapes and one dressing stone for maintaining the abrasive surfaces.
Figure 1: The wolfcraft 2144000 Mounted Stone Set, featuring five distinct grinding stone shapes and a dressing stone.
સમાવાયેલ ઘટકો
- 5 x Mounted Grinding Stones (various shapes)
- 1 x Dressing Stone
2. સલામતી સૂચનાઓ
ઉત્પાદનને ઈજા અને નુકસાન અટકાવવા માટે હંમેશા નીચેની સલામતી સાવચેતીઓનું પાલન કરો.
- વ્યક્તિગત રક્ષણાત્મક ઉપકરણો (PPE) પહેરો: Always wear safety glasses, hearing protection, and gloves when operating rotary tools with mounted stones.
- Check RPM Limits: Ensure the RPM of your rotary tool does not exceed the maximum RPM specified for the mounted stones (max. 23,000 RPM).
- સુરક્ષિત વર્કપીસ: ઓપરેશન દરમિયાન હલનચલન અટકાવવા માટે હંમેશા વર્કપીસને મજબૂતીથી સુરક્ષિત કરો.
- પથ્થરોનું નિરીક્ષણ કરો: Before each use, inspect the mounted stones for any damage, cracks, or excessive wear. Do not use damaged stones.
- યોગ્ય માઉન્ટિંગ: Ensure the mounted stone is securely fastened in the chuck of your rotary tool.
- વેન્ટિલેશન: Work in a well-ventilated area to avoid inhaling dust particles.
- ઓવરહિટીંગ ટાળો: Do not apply excessive pressure, which can cause the stone or workpiece to overheat.
- સ્પષ્ટ રાખો: હાથ અને છૂટા કપડાંને ફરતા ભાગોથી દૂર રાખો.
Figure 2: Safety symbols indicating the necessity of eye protection, hearing protection, and gloves during operation. Also shown are maximum RPM and individual stone dimensions.
3. સેટઅપ
Follow these steps to properly set up the mounted stones for use.
- Select the Appropriate Stone: Choose the mounted stone with the shape and grit suitable for your specific application and material.
- Insert into Rotary Tool: Loosen the chuck of your rotary tool (e.g., drill, die grinder). Insert the shaft of the mounted stone into the chuck, ensuring it is seated deeply and securely.
- ચકને કડક કરો: Firmly tighten the chuck to prevent the stone from slipping during operation. Verify that the stone is centered and runs true.
- Verify RPM: Confirm that your rotary tool's speed setting does not exceed the maximum recommended RPM of 23,000 for these stones.
4. ઓપરેટિંગ સૂચનાઓ
Use the mounted stones for grinding, deburring, and shaping various materials.
સામાન્ય વપરાશ
- સામગ્રી સુસંગતતા: Suitable for metals, glass, ceramics, and plastic materials.
- અરજી: Apply light, consistent pressure. Allow the stone to do the work. Excessive pressure can lead to premature wear, overheating, and potential damage to the stone or workpiece.
- ચળવળ: Move the stone continuously across the workpiece to ensure even material removal and prevent grooving.
આકૃતિ 3: ઉદાample of a mounted stone in use, smoothing a circular opening in a workpiece, demonstrating its application for precise shaping.
Figure 4: A conical mounted stone deburring the interior edge of a metal pipe, illustrating its effectiveness for internal grinding and edge finishing.
5. જાળવણી
Using the Dressing Stone
Over time, grinding stones can become clogged with material or develop an uneven surface, reducing their effectiveness. The included dressing stone is used to clean and reshape the grinding stones.
- Mount the Grinding Stone: Secure the grinding stone you wish to dress in your rotary tool.
- Activate Rotary Tool: Turn on the rotary tool at a moderate speed.
- Dress the Stone: Gently press the rotating grinding stone against the dressing stone. Move the grinding stone across the surface of the dressing stone to remove clogged material and expose fresh abrasive particles. This also helps to restore the original shape of the stone.
- તપાસ કરો: After dressing, inspect the grinding stone to ensure it is clean and has a renewed abrasive surface.
સંગ્રહ
Store the mounted stone set in a dry place, away from moisture and direct sunlight, to prevent degradation of the abrasive material.
6. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| નબળી ગ્રાઇન્ડીંગ કામગીરી | Stone is clogged or worn out. | Use the dressing stone to clean and reshape. Replace if severely worn. |
| અતિશય કંપન | Stone not securely mounted or damaged. | Ensure stone is tightly secured in the chuck. Inspect for damage and replace if necessary. |
| Overheating of workpiece/stone | Excessive pressure or incorrect RPM. | Reduce pressure. Verify RPM is within recommended limits. Allow cooling periods. |
7. સ્પષ્ટીકરણો
| લક્ષણ | વિગત |
|---|---|
| મોડલ નંબર | 2144000 |
| સામગ્રી | એલ્યુમિનિયમ ઓક્સાઇડ |
| ગ્રિટ પ્રકાર | Medium (Grit Number: 120) |
| ટુકડાઓની સંખ્યા | 6 (5 mounted stones, 1 dressing stone) |
| મહત્તમ RPM | 23,000 RPM |
| સુસંગત ઉપકરણો | Rotary tools (e.g., drills, die grinders) |
| વસ્તુનું વજન | ૮.૪૭ ઔંસ (આશરે ૨૪૦ ગ્રામ) |
| ઉત્પાદનના પરિમાણો (આશરે) | 0.24"L x 0.24"W (individual stone dimensions vary) |
| યુપીસી/જીટીઆઈએન | 04006885214408 |
8. વોરંટી અને સપોર્ટ
wolfcraft products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the official wolfcraft webસાઇટ અથવા ગ્રાહક સપોર્ટનો સંપર્ક કરો.
સંપર્ક માહિતી
wolfcraft GmbH
Wolffstraße 1
59746 કેમ્પેનિચ
જર્મની
ઈમેલ: info@wolfcraft.com
Webસાઇટ: www.wolfcraft.com
Figure 5: wolfcraft's commitment to European manufacturing and recognition as a major German brand.
