Enersys Cyclon 0800-0004 X-Cell Battery User Manual

પરિચય

This manual provides essential information for the safe and effective use of the Enersys Cyclon 0800-0004 X-Cell 2 Volt/5 Amp Hour Sealed Lead Acid Battery. This pure lead sealed lead acid battery is designed for general applications such as emergency lighting, UPS systems, and electronic equipment.

Key features of the Cyclon battery include:

• પાવર ડેન્સિટી: Offers high-rate power density per unit weight, allowing for more energy-supporting features.
• સાયકલ જીવન: Provides 50% to 200% greater full cycle capability compared to competitive lead products, delivering up to 300 cycles (100% DOD, C/5).
• Float Life: Designed for a ten-year life at 25°C, C/5, to 80% of rated capacity.
• High Stable Voltage Delivery: Achieved through low internal resistance, providing a flat discharge voltagઇ તરફીfile similar to Nickel Cadmium.
• સલામતી: Emits minimal to no gassing under normal charging conditions, making it safe for installation in various environments.

આકૃતિ 1: ફ્રન્ટ view of the Enersys Cyclon 0800-0004 X-Cell battery, showing the brand name, model, and key specifications.

Figure 2: Diagram illustrating the internal components of a Cyclon Single Cell, including the resealable safety valve, pure lead plates, AGM plate separator, and steel can enclosure.

સેટઅપ અને ઇન્સ્ટોલેશન

Proper setup is crucial for the optimal performance and longevity of your Enersys Cyclon battery. Follow these guidelines carefully:

૩. પ્રારંભિક નિરીક્ષણ

Upon receiving the battery, inspect it for any signs of physical damage. Ensure the terminals are clean and free from corrosion. Do not use the battery if it appears damaged.

2. પર્યાવરણીય પરિસ્થિતિઓ

Install the battery in a clean, dry, and well-ventilated area. Avoid locations with extreme temperatures, direct sunlight, or high humidity. The recommended operating temperature range is typically between -65°C to +80°C, but optimal performance and float life are achieved around 25°C.

3. કનેક્શન માર્ગદર્શિકા

Connect the battery to your equipment using appropriate cables and connectors. Ensure correct polarity: connect the positive (+) terminal of the battery to the positive terminal of your device, and the negative (-) terminal to the negative terminal. Incorrect polarity can damage the battery and connected equipment.

આકૃતિ 3: ટોચ view of the Enersys Cyclon battery, showing the positive and negative terminals for connection.

૪.૩. પ્રારંભિક ચાર્જિંગ

While Cyclon batteries are shipped with a charge, it is recommended to fully charge the battery before its first use, especially if it has been stored for an extended period. Use a charger specifically designed for sealed lead-acid batteries with a 2-volt output. Refer to the charger's instructions for proper charging procedures.

ઓપરેટિંગ સૂચનાઓ

The Enersys Cyclon battery is designed for reliable performance in various applications. Observe the following during operation:

1. Discharge Characteristics

The Cyclon battery provides a high stable voltage delivery due to its low internal resistance. This results in a flat discharge voltagઇ તરફીfile, ensuring consistent power output throughout its discharge cycle. Avoid deep discharges below the recommended voltage levels to maximize battery life.

2. Charging During Operation

For applications requiring continuous power, the battery can be kept on a float charge. Ensure the charging voltage is within the manufacturer's specified range for 2-volt sealed lead-acid batteries to prevent overcharging or undercharging.

3. સુરક્ષા સાવચેતીઓ

Although Cyclon batteries are sealed and non-spillable, always handle them with care. Do not short-circuit the terminals. Avoid exposing the battery to open flames or excessive heat. Ensure proper ventilation if the battery is enclosed, even though gassing is minimal under normal conditions.

જાળવણી

Enersys Cyclon batteries are maintenance-free due to their sealed, non-spillable design. However, periodic checks can help ensure optimal performance and longevity:

1. Terminal Inspection

Periodically check the battery terminals for cleanliness and tight connections. Clean any dust or dirt with a dry cloth. Do not use abrasive cleaners or solvents.

2. સંગ્રહ

If the battery is to be stored for an extended period, ensure it is fully charged before storage. Store in a cool, dry place away from direct sunlight and extreme temperatures. Recharge the battery every 6-9 months during storage to prevent self-discharge and maintain capacity.

3. બેટરી નિકાલ

Do not dispose of the battery in household waste. Sealed lead-acid batteries contain recyclable materials and should be recycled according to local regulations. Contact your local recycling center for proper disposal instructions.

મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your Enersys Cyclon battery.

If you experience issues not listed here or if the suggested solutions do not resolve the problem, please contact Enersys customer support.

વિશિષ્ટતાઓ

Detailed specifications for the Enersys Cyclon 0800-0004 X-Cell Battery:

• મોડલ નંબર: 0800-0004
• બેટરીનો પ્રકાર: સીલબંધ લીડ એસિડ (SLA)
• ભાગtage: 2 વોલ્ટ
• ક્ષમતા: 5 Amp કલાક (આહ)
• ઉત્પાદન પરિમાણો: 1.75 x 1.75 x 3.21 ઇંચ
• વસ્તુનું વજન: 12.8 ઔંસ
• ઉત્પાદક: એનર્સિસ
• પ્રથમ ઉપલબ્ધ તારીખ: 18 જૂન, 2004
• ભલામણ કરેલ ઉપયોગો: Emergency lighting, UPS systems, electronic equipment

સલામતી અને ચેતવણીઓ

Please read and understand all safety warnings before handling or using the battery.

Figure 4: Warning label on the Enersys Cyclon battery, including Proposition 65 warning and other safety symbols.

દરખાસ્ત 65 ચેતવણી

ચેતવણી: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash hands after handling.

સામાન્ય સલામતી સાવચેતીઓ

• Risk of fire, explosions or burns. Do not disassemble, heat above 80°C or incinerate.
• Follow product charging instructions.
• Do not charge in sealed container.
• Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when handling batteries.
• બેટરીને બાળકોની પહોંચથી દૂર રાખો.
• In case of accidental contact with battery contents, flush with water immediately and seek medical attention.

વોરંટી અને આધાર

For warranty information, please refer to the documentation provided with your purchase or contact Enersys directly. The manufacturer's warranty typically covers defects in materials and workmanship under normal use.

ઉત્પાદક સંપર્ક માહિતી:

Enersys Energy Products Inc.
Warrensburg, MO 64093-9301
ફોન: (610) 208-1991
Webસાઇટ: www.enersys.com

For full list of the warning and precautionary statements and applicable SDS sheet, please visit the Enersys webસાઇટ