La Crosse Technology WS-9117U-IT-CBP Wireless Temperature Station User Manual

1. પરિચય

This manual provides instructions for the setup, operation, and maintenance of your La Crosse Technology WS-9117U-IT-CBP Wireless Temperature Station. This device monitors both indoor and outdoor temperatures, displaying them on a digital screen along with time and date information.

The system consists of a main receiver unit and a wireless outdoor sensor. The receiver displays current indoor temperature, outdoor temperature, time, date, and records of minimum and maximum temperatures with timestamps.

2. પેકેજ સામગ્રી

• 1x WS-9117U-IT-CBP Wireless Temperature Station Receiver
• 1x TX29U-IT Wireless Outdoor Temperature Sensor
• 1x Detachable Stand for Receiver
• સેન્સર માટે માઉન્ટિંગ હાર્ડવેર

નોંધ: 2 AAA alkaline batteries for the receiver and 2 AA alkaline batteries for the sensor are required and sold separately.

3. સેટઅપ

3.1 બેટરી ઇન્સ્ટોલેશન

રીસીવર એકમ:

1. Remove the battery cover on the back of the receiver unit.
2. Insert 2 new AAA alkaline batteries according to the polarity markings (+ and -).
3. બેટરી કવર બદલો.

Outdoor Sensor (TX29U-IT):

1. Open the battery compartment on the back of the TX29U-IT sensor.
2. Insert 2 new AA alkaline batteries according to the polarity markings (+ and -).
3. Close the battery compartment securely to ensure weather resistance.

આકૃતિ 1: Receiver and Sensor with Battery Compartments. This image illustrates the main receiver unit and the outdoor sensor, highlighting where batteries are inserted in each device.

3.2 સેન્સર પ્લેસમેન્ટ

For accurate outdoor temperature readings, place the TX29U-IT sensor in a shaded area, away from direct sunlight and heat sources. Ensure it is sheltered from direct rain and snow to prevent damage, while allowing for adequate air circulation.

• The sensor transmits data up to 330 feet (100 meters) in open air at a 915 MHz frequency. Walls and other obstructions will reduce this range.
• Mount the sensor vertically using the provided hardware.

આકૃતિ 2: Recommended Sensor Placement. This image demonstrates an ideal outdoor location for the sensor, ensuring it is protected from direct weather elements and sunlight for accurate readings.

૪.૩ પ્રારંભિક સુમેળ

After installing batteries in both units, the receiver will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. Ensure both units are within range during initial setup. If the outdoor temperature does not appear, press the "SEARCH" button on the receiver to initiate a manual search for the sensor.

4. ઓપરેટિંગ સૂચનાઓ

4.1 ઓવર ડિસ્પ્લેview

આકૃતિ 3: Receiver LCD Display. This image provides a detailed view of the receiver's digital screen, indicating the layout of indoor temperature, outdoor temperature, time, and date information.

The digital screen displays the following information:

• વર્તમાન ઇન્ડોર તાપમાન
• વર્તમાન આઉટડોર તાપમાન
• Time (12-hour or 24-hour format)
• તારીખ
• Minimum and Maximum Temperature Records with Time Stamp

4.2 સમય અને તારીખ સેટ કરવી

The unit features a quartz clock. To set the time and date:

1. દબાવો અને પકડી રાખો "SET" button (or similar button, refer to specific unit markings) until the time display begins to flash.
2. નો ઉપયોગ કરો "+" or "-" buttons to adjust the flashing value (e.g., hour, minute).
3. દબાવો "SET" again to confirm the setting and move to the next adjustable item.
4. Repeat until all time and date settings are configured.
5. The unit supports 12-hour or 24-hour time formats. This can typically be toggled during the time setting process.

4.3 Temperature Display (Fahrenheit/Celsius)

To switch between Fahrenheit (°F) and Celsius (°C) temperature display, press the "°F/°C" button, usually located on the back or side of the receiver unit.

4.4 Minimum and Maximum Temperature Records

The receiver automatically records the minimum and maximum indoor and outdoor temperatures. To view these records:

• દબાવો "MIN/MAX" button once to display the maximum recorded temperatures.
• દબાવો "MIN/MAX" button a second time to display the minimum recorded temperatures.
• દબાવો "MIN/MAX" button a third time to return to the current temperature display.
• To clear the recorded minimum and maximum values, press and hold the "MIN/MAX" button while the min/max values are displayed.

4.5 Adding Additional Sensors

The temperature station can accommodate up to three outdoor sensors. To add an additional sensor (sold separately), install batteries in the new sensor and then press the "CHANNEL" or "SEARCH" button on the receiver to cycle through channels or initiate a search for new sensors. Follow the pairing instructions provided with the additional sensor.

5. જાળવણી

• બેટરી રિપ્લેસમેન્ટ: Replace batteries annually or when the low battery indicator appears on the display. Use only alkaline batteries.
• સેન્સર કેર: While the sensor is designed to withstand fog or mist, it should be sheltered from direct rain and prolonged exposure to harsh weather conditions to ensure longevity and accurate readings.
• સફાઈ: Clean the display and sensor with a soft, damp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.

6. મુશ્કેલીનિવારણ

7. સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

This product is covered under a limited 1-year warranty from the date of purchase. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official La Crosse Technology webસાઇટ

વધારાની સપોર્ટ અને ઉત્પાદન માહિતી માટે, તમે મુલાકાત લઈ શકો છો એમેઝોન પર લા ક્રોસ ટેકનોલોજી સ્ટોર.