Steinel IS 180-2

Steinel IS 180-2 Infrared Motion Detector User Manual

Model: IS 180-2

1. પરિચય

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Steinel IS 180-2 Infrared Motion Detector. Designed for both indoor and outdoor applications, this device offers reliable motion detection and automatic light control. Please read these instructions carefully before beginning installation or operation to ensure safe and efficient use.

2. સલામતી સૂચનાઓ

ચેતવણી: Incorrect installation can lead to electric shock, fire, or other hazards. Always ensure that installation is performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.

  • Disconnect power at the main circuit breaker before installation or maintenance.
  • ઉત્પાદન ખોલશો નહીં casing unless specifically instructed. There are no user-serviceable parts inside.
  • Ensure the product is securely mounted to prevent it from falling.
  • Keep children away from electrical devices.

3. ઉત્પાદન ઓવરview

The Steinel IS 180-2 is an elegant infrared motion detector combining advanced sensor technology with a modern design. It is equipped with two highly sensitive infrared detectors to provide reliable, uninterrupted all-round protection.

આગળ view of the Steinel IS 180-2 Infrared Motion Detector in silver.

આકૃતિ 3.1: ફ્રન્ટ view of the Steinel IS 180-2 Infrared Motion Detector, showcasing its sleek silver finish and integrated sensor lens.

Steinel IS 180-2 product packaging and contents, including the sensor, manual, screws, and corner mount.

Figure 3.2: The Steinel IS 180-2 package contents, including the motion detector, quick start guide, mounting screws, and a corner wall mount accessory.

Graphic summarizing key features of the Steinel IS 180-2: 350W max LED, 180 degree infrared sensor, 12m max range, IP54 rating, plastic-free packaging, 2-2000 lux twilight, 5 sec - 15 min time setting, and a QR code for AR view.

Figure 3.3: Key features of the IS 180-2, including its 180° infrared sensor, maximum 12m range, IP54 weather protection, and adjustable time and twilight settings. For an augmented reality view of the product, scan the QR code or visit આ લિંક.

પાછળ view of the Steinel IS 180-2 motion detector, showing mounting holes and wiring access.

આકૃતિ 3.4: પાછળ view of the motion detector, illustrating the mounting points and the area for electrical connections.

4. ઇન્સ્ટોલેશન અને માઉન્ટિંગ

The Steinel IS 180-2 is designed for wall mounting and includes a corner wall mount for flexible installation. Ensure the mounting surface is stable and suitable for the device's weight.

.4.1.૧ માઉન્ટ કરવાનું સ્થાન

Choose a location that provides the desired detection coverage. The sensor offers a 180° detection angle and a maximum range of 12 meters. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, direct sunlight).

Steinel IS 180-2 motion detector mounted on a white exterior wall.

Figure 4.1: The IS 180-2 mounted on an exterior wall, demonstrating a typical installation scenario.

4.2 ડિટેક્શન ઝોન

The detection zone can be adjusted to suit specific requirements. The sensor provides coverage for areas as large as 200 m².

Diagram illustrating the 180-degree detection area of the motion sensor from an aerial perspective, covering a wide arc around a building.

આકૃતિ 4.2: ઓવરહેડ view of the 180° detection zone, showing how the sensor covers a broad area in front of a building.

Diagram showing detection patterns for wall and corner mounting, indicating a 180-degree, 12-meter range.

Figure 4.3: Illustration of detection patterns for both flat wall and corner mounting, highlighting the 180° coverage and 12m range.

Diagram showing the side view of the detection range, illustrating how the sensor detects movement at different distances and heights.

આકૃતિ 4.4: બાજુ view diagram detailing the sensor's detection range, showing its ability to detect movement across various distances and vertical angles.

5. ઓપરેટિંગ સૂચનાઓ

The Steinel IS 180-2 operates by detecting infrared radiation (heat) emitted by moving objects. When motion is detected within its adjustable range and the ambient light level falls below the set twilight threshold, the connected light source will activate for the set duration.

6. ગોઠવણો

The motion detector features control dials for fine-tuning its operation. These dials are typically located behind the sensor lens or on the underside of the unit.

ક્લોઝ-અપ view of the control dials on the Steinel IS 180-2 for adjusting time and twilight settings.

Figure 6.1: Control dials for adjusting the time and twilight threshold settings of the motion detector.

  • સમય સેટિંગ: This dial adjusts how long the light remains on after motion is detected. It can be infinitely varied from approximately 5 seconds to 15 minutes.
  • Twilight Threshold: This dial sets the ambient light level at which the sensor becomes active. It can be adjusted from approximately 2 lux (dark) to 2000 lux (daylight).
  • પહોંચ ગોઠવણ: The reach of the motion sensor can be set to a maximum of 12 meters or reduced to 5 meters by turning the multi-lens. Shrouds are also provided to limit the detection zone and match it to specific situations, preventing unwanted triggers.

7. જાળવણી

The Steinel IS 180-2 motion detector requires minimal maintenance. To ensure optimal performance:

  • સમયાંતરે સેન્સર લેન્સને સોફ્ટ, ડી વડે સાફ કરોamp cloth to remove dust or dirt that may obstruct detection. Do not use abrasive cleaners or solvents.
  • Ensure the area around the sensor remains clear of obstructions that could block its field of view or cause false triggers.
  • No internal maintenance or lubrication is required.

8. મુશ્કેલીનિવારણ

If your Steinel IS 180-2 is not functioning as expected, consult the following table for common issues and solutions:

સમસ્યાસંભવિત કારણઉકેલ
પ્રકાશ સતત ચાલુ રહે છે.Continuous motion in detection zone; Time setting too long; Wiring fault.Remove obstructions; Adjust time setting; Check wiring.
Light does not switch on.No power; Twilight setting too high; Sensor lens obstructed; Faulty bulb.Check power supply; Adjust twilight setting; Clean lens; Replace bulb.
False triggers.Heat sources (e.g., vents, animals); Detection zone too wide.Relocate sensor; Adjust reach using shrouds or multi-lens.

9. સ્પષ્ટીકરણો

Technical drawing with dimensions of the Steinel IS 180-2 motion detector.

Figure 9.1: Technical drawing showing the dimensions of the Steinel IS 180-2 in millimeters.

લક્ષણવિગત
બ્રાન્ડસ્ટીનલ
મોડલIS 180-2
પાવર સ્ત્રોતકોર્ડેડ ઇલેક્ટ્રિક
ભાગtage230 વોલ્ટ
મહત્તમ સ્વિચિંગ ક્ષમતા1000 Watts (Max. 350 W LED)
શોધ કોણ180°
મહત્તમ શ્રેણી12 મીટર
Twilight Setting2 - 2000 લક્સ
સમય સેટિંગ5 સેકન્ડ - 15 મિનિટ
માઉન્ટિંગ પ્રકારવોલ માઉન્ટ
પ્રોટેક્શન રેટિંગIP54
વસ્તુનું વજન૪૫૦ ગ્રામ (આશરે ૧૫.૯ ઔંસ)
ઉત્પાદન પરિમાણો૭ x ૬ x ૩ ઇંચ (આશરે ૧૭૮ x ૧૫૨ x ૭૬ મીમી)

10. વોરંટી અને સપોર્ટ

The Steinel IS 180-2 Infrared Motion Detector comes with a 3-year manufacturer's warranty. For warranty claims or technical support, please contact Steinel customer service or visit their official webસાઇટ

વધુ માહિતી માટે, કૃપા કરીને મુલાકાત લો: www.steinel.de/garantie

સંબંધિત દસ્તાવેજો - IS 180-2

પ્રિview STEINEL IS 2180 ECO Infrared Motion Sensor Installation Manual
Installation and user manual for the STEINEL IS 2180 ECO infrared motion sensor. Details features, technical specifications, installation, and troubleshooting for reliable automatic lighting control.
પ્રિview STEINEL IS 2180-2 Infrarot-Bewegungsmelder: Montageanleitung und technische Informationen
ઉમ્ફાસેન્ડે સોમtageanleitung für den STEINEL IS 2180-2 Infrarot-Bewegungsmelder. Enthält technische Daten, Installationsschritte, Funktionsbeschreibungen, Fehlerbehebung und Garantieinformationen. Das Dokument ist in mehreren Sprachen verfügbar, mit Fokus auf Deutsch.
પ્રિview Steinel NightmatIQ & NightmatIQ Plus Quick Start Guide | Twilight Sensors
Quick start guide for Steinel NightmatIQ and NightmatIQ Plus twilight sensors. Learn about installation, technical specifications, and features for intelligent lighting control.
પ્રિview STEINEL IS 2360-3 ECO Infrared Ceiling Motion Detector | Specifications & Wiring
Detailed information on the STEINEL IS 2360-3 ECO infrared ceiling motion detector, including its features, technical specifications, detection zone, and wiring diagrams for installation and operation.
પ્રિview STEINEL IS 2180-2 Infrared Motion Sensor Installation Manual
Comprehensive guide for installing and operating the STEINEL IS 2180-2 infrared motion sensor, featuring adjustable range, time, and light sensitivity for reliable lighting control.
પ્રિview STEINEL Sensor Guide: The Fast Track to the Right Sensor for Your Application
Discover STEINEL's optimal sensor and lighting solutions for every space. This guide details various sensor technologies (PIR, HF, US, Optical) and their applications in indoor and outdoor environments, helping you find the ideal sensor for any situation.