Sealey SA22

સીલી SA22 એર ઓપરેટેડ ફ્લેટ બેડ સેન્ડર સૂચના માર્ગદર્શિકા

મોડલ: SA22

1. પરિચય

This manual provides essential instructions for the safe and effective use of your Sealey SA22 Air Operated Flat Bed Sander. The SA22 is an orbital flat bed sander designed for various sanding applications, including body panels, wood, metals, and plastics. It features a counter-balanced drive shaft for smooth operation and a palm-type trigger for comfortable, one-handed use.

Please read this manual thoroughly before operating the tool and retain it for future reference.

2. સલામતી સૂચનાઓ

Always observe general workshop safety rules when using power tools. Failure to do so may result in injury or damage to the tool.

3. બોક્સમાં શું છે

અનપેક કરતી વખતે, કૃપા કરીને ચકાસો કે બધા ઘટકો હાજર છે અને તેમને કોઈ નુકસાન થયું નથી:

જો કોઈ વસ્તુ ખૂટે છે અથવા ક્ષતિગ્રસ્ત છે, તો કૃપા કરીને તાત્કાલિક તમારા સપ્લાયરનો સંપર્ક કરો.

4. સેટઅપ

4.1. Air Supply Connection

  1. Ensure the air compressor is turned off and the air line is depressurized.
  2. Connect a suitable air hose (minimum 3/8" I.D.) to the air inlet of the sander. It is recommended to use an in-line air filter/lubricator unit to ensure clean, lubricated air.
  3. Set the air pressure regulator on your compressor to the recommended operating pressure (typically 90 psi / 6.2 bar). Do not exceed the maximum operating pressure.

4.2. Attaching Sanding Sheets

The SA22 uses standard flat sanding sheets. To attach a sheet:

  1. સીએલ છોડોamping levers on both ends of the sanding pad.
  2. Insert one end of the sanding sheet under the clamp અને તેને સુરક્ષિત કરો.
  3. Stretch the sanding sheet taut over the pad and insert the other end under the second clamp, તેને મજબૂત રીતે સુરક્ષિત કરીને.
  4. Ensure the sheet is flat and wrinkle-free on the sanding pad.
Sealey SA22 Air Operated Flat Bed Sander, top-front view

આકૃતિ ૩.૧: ઉપરથી આગળ view of the Sealey SA22 Air Operated Flat Bed Sander, showing the palm trigger and sanding pad.

5. ઓપરેટિંગ સૂચનાઓ

5.1. સામાન્ય કામગીરી

  1. Ensure all safety precautions are followed and the workpiece is securely fastened.
  2. હવા પુરવઠો જોડો.
  3. Hold the sander firmly with one hand, placing your palm over the trigger mechanism.
  4. Place the sanding pad flat against the surface to be sanded.
  5. Depress the palm trigger to start the sander.
  6. Move the sander in a smooth, overlapping pattern across the surface. Avoid applying excessive pressure; let the tool do the work.
  7. સેન્ડરને રોકવા માટે ટ્રિગર છોડો.
  8. Disconnect the air supply when finished or before making adjustments.

૫.૨. ભલામણ કરેલ એપ્લિકેશનો

The Sealey SA22 is suitable for:

Sealey SA22 Air Operated Flat Bed Sander, side-front view

Figure 2: Side-front view of the Sealey SA22 Air Operated Flat Bed Sander, highlighting the air inlet and clamping મિકેનિઝમ.

6. જાળવણી

નિયમિત જાળવણી શ્રેષ્ઠ કામગીરી સુનિશ્ચિત કરે છે અને તમારા સાધનનું આયુષ્ય લંબાવે છે.

Sealey SA22 Air Operated Flat Bed Sander, side view

આકૃતિ 3: બાજુ view of the Sealey SA22 Air Operated Flat Bed Sander, showing the compact design.

7. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
Sander not operating or low powerLow air pressure; Restricted air flow; Lack of lubrication; Damaged internal components.Check air compressor pressure and regulator setting; Inspect air hose and fittings for kinks or blockages; Add air tool oil to the air inlet; Contact qualified service personnel.
અતિશય કંપનWorn sanding pad; Loose sanding sheet; Internal imbalance.Replace sanding pad; Re-secure sanding sheet; Contact qualified service personnel.
હવા લિકેજLoose fittings; Worn O-rings or seals.Tighten all air fittings; Replace worn seals or O-rings.

8. સ્પષ્ટીકરણો

લક્ષણવિગત
મોડલ નંબરSA22
બ્રાન્ડસીલી
પાવર સ્ત્રોતAir-Powered
પૅડનું કદ170 x 95 મીમી
ભ્રમણકક્ષાનું કદØ5 મીમી
મહત્તમ રોટેશનલ સ્પીડ11000 RPM
વસ્તુનું વજન2.01 કિલોગ્રામ (4.42 પાઉન્ડ)
ઉત્પાદન પરિમાણો4.41 x 9.29 x 5.91 ઇંચ
ભલામણ કરેલ હવાનું દબાણ90 psi (6.2 બાર)
એર ઇનલેટ કદ(Not specified, but typically 1/4" NPT for small air tools)

9. વોરંટી અને સપોર્ટ

Sealey products are backed by a 12-month guarantee. Hand tools may benefit from a lifetime warranty. For specific warranty details, please refer to the documentation provided with your purchase or visit the official Sealey webસાઇટ

Sealey maintains an extensive parts service with over 130,000 different parts in stock. For parts lists and online instructions, please visit the official Sealey webસાઇટ અથવા તેમના ગ્રાહક સપોર્ટનો સંપર્ક કરો.

સંપર્ક માહિતી: For technical support, service, or parts inquiries, please refer to the contact details provided on the official Sealey webસાઇટ અથવા તમારા ખરીદી દસ્તાવેજો.

સંબંધિત દસ્તાવેજો - SA22

પ્રિview Sealey SA802.V2 Air Palm Sander 75mm: Instructions and Safety Guide
Comprehensive instructions and safety guide for the Sealey SA802.V2 Air Palm Sander 75mm, covering operation, maintenance, specifications, and important safety warnings including Hand Arm Vibration and lead paint.
પ્રિview Sealey DAS152PS 100 x 150mm Variable Speed Brushless Orbital Sander User Manual
Comprehensive user manual for the Sealey DAS152PS 100 x 150mm Variable Speed Brushless Orbital Sander, covering safety, operation, maintenance, and specifications. Learn how to use the tool safely and effectively.
પ્રિview Sealey S01046.V2 Air Belt Sander - User Manual and Safety Instructions
Comprehensive user manual and safety guide for the Sealey S01046.V2 Air Belt Sander. Learn about safe operation, specifications, maintenance, and troubleshooting for this professional workshop tool.
પ્રિview Sealey MS900PS Ø170mm Variable Speed Sander/Polisher 1300W - User Manual
Comprehensive instructions for the Sealey MS900PS Ø170mm Variable Speed Sander/Polisher (1300W), covering safety precautions, specifications, assembly, operation, and maintenance. Includes guidance on electrical safety, general workshop practices, and hand-arm vibration.
પ્રિview Sealey TP90.V2 Air Operated Transfer Pump: Instructions and Specifications
Detailed instructions, safety guidelines, specifications, and troubleshooting for the Sealey TP90.V2 Air Operated Transfer Pump. Includes information on operation and chemical compatibility.
પ્રિview Sealey SM15.V2 Floor Standing Belt/Disc Sander - Instructions and Specifications
Comprehensive instructions, safety guidelines, specifications, and assembly details for the Sealey SM15.V2 Floor Standing Belt/Disc Sander. Learn how to operate and maintain your woodworking tool.