પરિચય
ખરીદી બદલ આભારasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
પેકેજ સામગ્રી
- Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
- AAA બેટરી x 2
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
ઉત્પાદન ઓવરview
The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.
This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.
સેટઅપ
1. બેટરી ઇન્સ્ટોલેશન
- એલાર્મ ઘડિયાળની પાછળ બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
- Remove the cover by sliding or gently prying it open.
- કમ્પાર્ટમેન્ટની અંદર દર્શાવેલ યોગ્ય ધ્રુવીયતા (+ અને -) સુનિશ્ચિત કરીને, બે (2) AAA બેટરી દાખલ કરો.
- બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બદલો.
2. પ્રારંભિક પાવર ચાલુ
Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.
ઓપરેટિંગ સૂચનાઓ
The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.
સમય સુયોજિત કરી રહ્યા છીએ
- Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
- Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
- Press the "SET" or "TIME" button again to move to the minute setting.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "SET" or "TIME" one last time to confirm and exit time setting mode.
એલાર્મ સેટ કરી રહ્યું છે
- Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
- Press and hold the "ALARM" button until the alarm hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the alarm hour.
- Press the "ALARM" button again to move to the alarm minute setting.
- Use the "+" and "-" buttons to adjust the alarm minutes.
- Press "ALARM" one last time to confirm and exit alarm setting mode.
Using the On/Off Function
The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:
- Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
- Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
- Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.
To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.
ઇએલ બેકલાઇટ
To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.
Hourly Time Signal (Chime)
The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.
જાળવણી
- સફાઈ: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
- બેટરી રિપ્લેસમેન્ટ: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
- સંગ્રહ: જો ઘડિયાળને લાંબા સમય સુધી સંગ્રહિત કરી રહ્યા હોવ, તો લીકેજ અટકાવવા માટે બેટરીઓ દૂર કરો.
- પર્યાવરણ: ઘડિયાળને અતિશય તાપમાન, સીધો સૂર્યપ્રકાશ, ઉચ્ચ ભેજ અથવા મજબૂત ચુંબકીય ક્ષેત્રોના સંપર્કમાં આવવાનું ટાળો.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ડિસ્પ્લે ખાલી અથવા ઝાંખું છે. | ઓછી અથવા બંધ બેટરી; ખોટી બેટરી ઇન્સ્ટોલેશન. | બેટરીઓને નવી AAA બેટરીથી બદલો; યોગ્ય ધ્રુવીયતા સુનિશ્ચિત કરો. |
| એલાર્મ વાગતો નથી. | Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable). | Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable. |
| સમય ખોટો છે. | Time was not set correctly; power interruption (if not battery-backed). | Reset the time according to the "Setting the Time" instructions. |
વિશિષ્ટતાઓ
- મોડલ: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
- બ્રાન્ડ: લેક્સન
- ડિસ્પ્લે પ્રકાર: ડિજિટલ એલસીડી
- પાવર સ્ત્રોત: 2 x AAA બેટરી
- સામગ્રી: એબીએસ (એક્રિલોનિટ્રિલ બ્યુટાડીન સ્ટાયરીન)
- પરિમાણો (W x D x H): 5.3 x 1.4 x 3.1 ઇંચ (13.5 x 3.5 x 8 સેમી)
- વજન: 0.13 કિગ્રા (4.6 ઔંસ)
- ખાસ લક્ષણો: On/Off 3 Position Function, EL Backlight, Hourly સમય સિગ્નલ
- માઉન્ટ કરવાનો પ્રકાર: ટેબલટોપ
- મૂળ દેશ: ચીન
વોરંટી અને આધાર
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon webસાઇટ. કોઈપણ વોરંટી દાવા માટે કૃપા કરીને ખરીદીનો પુરાવો રાખો.
For further assistance, you may contact Lexon customer support through their official channels.
