1. પરિચય
The AtlasIED PSR-206 is a zone page powered relay pack designed to provide six independent relay closures for various audio and control applications. This manual provides essential information for proper installation, operation, and maintenance of the device, ensuring reliable performance and system integration.
2. સલામતી માહિતી
WARNING: Risk of electric shock. Do not open the unit. Refer all servicing to qualified personnel.
- Always disconnect power before performing any installation, maintenance, or troubleshooting procedures.
- વિદ્યુત જોખમોને રોકવા માટે યુનિટનું યોગ્ય ગ્રાઉન્ડિંગ સુનિશ્ચિત કરો.
- Adhere to all local and national electrical codes during installation.
- યુનિટને ભેજ અથવા અતિશય તાપમાનના સંપર્કમાં ન લાવો.
- Use only specified fuse types and ratings for replacement.
3. ઉત્પાદન ઓવરview
The PSR-206 is a robust relay pack featuring six independent relays, powered by a 117 VAC input and providing a 24 VDC output. It is designed for integration into paging and control systems.
આકૃતિ 1: ટોચ view of the AtlasIED PSR-206 showing power input, fuse, amplifier output, bus connections, 24 VDC output, and six external switch relay terminals.
મુખ્ય લક્ષણો:
- Six independent relay closures.
- 117 VAC input power.
- 24 VDC at 1/2 AMP output for external devices.
- સંકલિત 1 AMP fuse for circuit protection.
- Clearly labeled screw terminals for easy wiring.
4. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| મોડલ નંબર | PSR-206 |
| ઇનપુટ વોલ્યુમtage | 117 VAC |
| આઉટપુટ વોલ્યુમtagઇ/વર્તમાન | 24 VDC at 1/2 AMP |
| રિલેની સંખ્યા | 6 |
| ફ્યુઝ રેટિંગ | 1 AMP |
| વસ્તુનું વજન | 6 પાઉન્ડ |
| પેકેજ પરિમાણો | 19 x 6 x 5 ઇંચ |
| ઉત્પાદક | એટલાસ સાઉન્ડ |
| તારીખ પ્રથમ ઉપલબ્ધ | 8 ડિસેમ્બર, 2008 |
5. સેટઅપ અને ઇન્સ્ટોલેશન
Careful installation is crucial for optimal performance. Ensure all power is disconnected before proceeding.
5.1 માઉન્ટ કરવાનું
The PSR-206 can be mounted to a flat surface using appropriate screws through the mounting tabs on the unit's chassis.
5.2 વાયરિંગ કનેક્શન્સ
- પાવર ઇનપુટ (117 VAC): Connect the unit's power cord to a standard 117 VAC power outlet. The unit is protected by a 1 AMP fuse, accessible on the side.
- 24 VDC Output: The terminals labeled '24 VDC' (+ and -) provide a regulated 24 VDC at 1/2 AMP for powering compatible external devices. Observe polarity.
- External Switches (Relay Control): The terminals labeled 'EXTERNAL SWITCHES' (1-6) along with 'COM' (Common) are used to control the six independent relays. Connect your external control switches between the 'COM' terminal and the desired relay terminal (1 through 6). When a switch is closed, the corresponding relay will activate.
- AMP બહાર: These terminals are typically used for connecting to an amplifier's input, often for muting or other control functions during paging. Consult your amplifier's manual for specific wiring.
- OFF BUS: These terminals are for specific system bus connections, often used to signal an 'off-hook' or busy status. Refer to your overall system design for proper integration.
6. ઓપરેટિંગ સૂચનાઓ
Once properly installed and wired, the PSR-206 operates automatically based on the signals received from connected external switches.
- Relay Activation: When an external switch connected to one of the 'EXTERNAL SWITCHES' terminals (1-6) and 'COM' is closed, the corresponding internal relay will activate. This closure can be used to trigger various functions in your audio or control system, such as zone paging, muting, or activating external devices.
- 24 VDC Power Supply: The 24 VDC output is continuously available when the unit is powered, providing a stable power source for low-power auxiliary equipment.
7. જાળવણી
The PSR-206 is designed for reliable, long-term operation with minimal maintenance.
- સફાઈ: સમયાંતરે યુનિટના બાહ્ય ભાગને નરમ, સૂકા કપડાથી સાફ કરો. પ્રવાહી ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
- ફ્યુઝ રિપ્લેસમેન્ટ: If the unit loses power, check the 1 AMP fuse located on the side of the unit. Disconnect power before replacing the fuse. Always replace with a fuse of the identical type and rating (1 AMP).
- કનેક્શન તપાસ: Annually inspect all wiring connections to ensure they are secure and free from corrosion.
8. મુશ્કેલીનિવારણ
સામાન્ય સમસ્યાઓ અને તેમના સંભવિત ઉકેલો માટે નીચેના કોષ્ટકનો સંદર્ભ લો.
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Unit has no power / No indicator lights | No 117 VAC input; Blown 1 AMP ફ્યુઝ | Verify power outlet functionality. Check and replace 1 AMP fuse if necessary (ensure power is disconnected first). |
| Relay not activating when external switch is closed | Incorrect wiring; Faulty external switch; Damaged relay | Check wiring between external switch and 'COM'/'EXTERNAL SWITCHES' terminals. Test the external switch for functionality. If issue persists, professional service may be required. |
| નંબર 24 VDC આઉટપુટ | Internal fault; Overload on 24 VDC output | Ensure no short circuits or excessive load on the 24 VDC output. If the unit has power but no 24 VDC output, professional service is recommended. |
9. વોરંટી અને સપોર્ટ
For detailed warranty information, technical support, or service inquiries, please contact Atlas Sound directly. Refer to your original purchase documentation or the official Atlas Sound webસૌથી અદ્યતન સંપર્ક વિગતો અને વોરંટી શરતો માટે સાઇટ.
ઉત્પાદક સરનામું: 1501 Jack McKay Blvd, Ennis, TX 758HG (Information derived from product labeling)
It is recommended to register your product with Atlas Sound to ensure you receive updates and support.
