નોવા ઓર્થો-મેડ 5000 સિરીઝ વ્હીલચેર વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Nova Ortho-Med 5000 Series Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper operation and user safety. Keep this manual for future reference.

1.1 સલામતી માહિતી

• Always engage wheel locks before transferring in or out of the wheelchair.
• દરેક ઉપયોગ પહેલાં ખાતરી કરો કે બધા ઘટકો સુરક્ષિત રીતે જોડાયેલા છે.
• 275 lbs ની મહત્તમ વજન ક્ષમતા કરતાં વધી જશો નહીં.
• Avoid sudden movements or leaning excessively, which could cause tipping.
• Regularly inspect tires, brakes, and frame for wear or damage.

2. ઘટકો ઓવરview

Familiarize yourself with the main parts of your Nova Ortho-Med 5000 Series Wheelchair.

Image 1: Nova Ortho-Med 5000 Series Wheelchair. This image displays the full wheelchair from a slight angle, showing the black seat and backrest, chrome frame, large rear wheels, smaller front casters, and adjustable footrests.

• ફ્રેમ: The main structure, typically chrome-plated steel.
• Seat and Backrest: Black nylon upholstery for user comfort.
• આર્મરેસ્ટ્સ: Padded for support, often removable or flip-back.
• રીઅર વ્હીલ્સ: Large wheels with handrims for self-propulsion, equipped with wheel locks.
• ફ્રન્ટ કેસ્ટર્સ: Smaller swivel wheels for steering and maneuverability.
• Footrests/Legrests: Adjustable and removable for user comfort and transfers.
• Wheel Locks: Levers located near the rear wheels to secure the wheelchair in place.

3. સેટઅપ અને એસેમ્બલી

3.1 Unfolding the Wheelchair

1. ફોલ્ડ કરેલી વ્હીલચેરને સપાટ, સ્થિર સપાટી પર મૂકો.
2. Grasp the top of the handgrips and gently pull them apart.
3. Push down on the seat rails until the seat is fully open and flat. Ensure the cross braces are fully extended.

3.2 Attaching Footrests/Legrests

1. Align the footrest attachment pins with the receptacles on the front of the wheelchair frame.
2. Swing the footrest outward slightly, insert the pins, and then swing the footrest inward until it locks into place.
3. Adjust the height of the footplates so the user's feet are comfortably supported and knees are at approximately a 90-degree angle. Use the adjustment lever or pin to secure the desired height.

3.3 Adjusting Hemi Seat Height (Dual Axle Design)

The dual axle design allows for easy conversion to hemi seat height. This adjustment lowers the seat for users who propel with their feet.

1. Remove the rear wheels by depressing the quick-release button on the axle and pulling the wheel off.
2. Relocate the axle to the lower set of holes on the frame.
3. Reattach the rear wheels, ensuring they are securely locked.
4. Adjust the front casters if necessary to maintain proper ground clearance and stability.

૪. વ્હીલચેર ચલાવવી

4.1 Engaging and Disengaging Wheel Locks

• To engage: Push the wheel lock levers forward until they click into place, securing the rear wheels.
• To disengage: Pull the wheel lock levers backward to release the rear wheels.
• Always engage both wheel locks when transferring or when the wheelchair is stationary.

4.2 Self-Propulsion

To move the wheelchair, grasp the handrims on the rear wheels and push forward or backward. Use both hands for smooth, controlled movement.

4.3 Assisted Propulsion

When assisting a user, push the wheelchair by the handgrips located on the back of the chair. Be mindful of obstacles and uneven terrain.

૬.૩ સંગ્રહ/પરિવહન માટે ફોલ્ડિંગ

1. Ensure footrests are removed or swung out of the way.
2. Grasp the center of the seat upholstery (front and back) and pull upwards. The wheelchair will begin to fold inward.
3. વ્હીલચેર સંપૂર્ણપણે ફોલ્ડ ન થાય ત્યાં સુધી ખેંચવાનું ચાલુ રાખો.

5. જાળવણી અને સંભાળ

5.1 સફાઈ

• જાહેરાતથી ફ્રેમ સાફ કરોamp કાપડ અને હળવો સાબુ લગાવો. સારી રીતે સુકાવો.
• Clean upholstery with a mild detergent and water. Allow to air dry completely.
• Avoid abrasive cleaners or solvents that could damage the finish or materials.

5.2 નિયમિત નિરીક્ષણ

Perform the following checks monthly or as needed:

• ટાયર: Check for wear, cracks, or punctures. Ensure proper inflation if pneumatic.
• Wheel Locks: Verify they engage securely and hold the wheels firmly. Adjust if necessary.
• ફાસ્ટનર્સ: Inspect all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
• ફ્રેમ: Look for any signs of cracks, bends, or corrosion.
• અપહોલ્સ્ટરી: Check for tears or excessive wear.

5.3 લુબ્રિકેશન

Apply a small amount of silicone-based lubricant to moving parts such as axle pins, caster stems, and folding mechanisms periodically to ensure smooth operation.

6. મુશ્કેલીનિવારણ

7. સ્પષ્ટીકરણો

• મોડલ: Nova Ortho-Med 5000 Series
• વજન ક્ષમતા: 275 lbs
• ફ્રેમ વજન: 39 lbs
• Width (Open): 23"
• Width (Closed): 10.5"
• સીટની ઊંડાઈ: 16"
• સામગ્રી: Steel frame, Nylon upholstery
• રંગ: કાળો
• વિશેષતાઓ: Dual axle for hemi-height conversion, offset arms, industry-compatible footrests.

8. વોરંટી અને સપોર્ટ

For specific warranty information regarding your Nova Ortho-Med 5000 Series Wheelchair, please refer to the documentation included with your purchase or contact Nova customer support directly. General product support and service inquiries can also be directed to the manufacturer.

ઉત્પાદક: Nova Ortho-Med, Inc.

Please note: Warranty terms and conditions may vary. Always consult the official warranty statement.