1. પરિચય
The Engineer SL-71 is a lightweight, LED-illuminated inspection magnifier designed for detailed examination. It features 10x magnification, a scratch-resistant twin lens construction, and an integrated square scale for precise measurements. This manual provides essential information for the proper setup, operation, and maintenance of your SL-71 magnifier.
The Engineer SL-71 LED Flashlight Magnifier, featuring a white magnifier head with a black lens ring, attached to a black cylindrical handle with a white power switch. The handle also displays battery installation instructions.
2. ઉત્પાદન ઓવરview
The SL-71 magnifier is engineered for clarity and durability, making it suitable for various inspection tasks, including printed circuit board (PCB) work. Its design ensures a fixed focal point, focusing directly on the object held against its faceplate.
મુખ્ય લક્ષણો:
- 10x વિસ્તૃતીકરણ: Provides clear, enlarged views for intricate details.
- એલઇડી રોશની: Integrated LED light source ensures bright, consistent lighting of the inspection area.
- Scratch-Resistant Twin Lens: Durable lens construction designed for longevity and clear vision.
- Integrated Square Scale: An internal 20mm precisely graduated scale allows for accurate measurements.
- બેટરી સંચાલિત: Uses 2 x C type batteries for portable operation.
3. સેટઅપ
બેટરી ઇન્સ્ટોલેશન:
- Locate the battery compartment on the handle of the magnifier.
- Gently pull the end cap of the handle straight off.
- Turn the bulb holder to the left and pull it out to access the battery slots.
- Insert two (2) C-type batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Reinsert the bulb holder, turning it to the right to secure.
- Replace the end cap by pushing it straight back onto the handle until it clicks into place.
The handle section of the Engineer SL-71 magnifier, featuring printed instructions for battery installation, indicating how to open the compartment and insert C-type batteries.
4. ઓપરેટિંગ સૂચનાઓ
મેગ્નિફાયરનો ઉપયોગ કરીને:
- પાવર ચાલુ/બંધ: Locate the white slide switch on the side of the handle. Slide it forward to turn on the LED illumination and backward to turn it off.
- સ્થિતિ: Place the magnifier's lens directly over the object you wish to inspect. The fixed focal point ensures the object is in focus when held against the faceplate.
- નિરીક્ષણ: Look through the eyepiece to view the magnified object. The LED light will illuminate the area for enhanced clarity.
The Engineer SL-71 magnifier positioned over a green circuit board, demonstrating its use for detailed inspection of electronic components.
Using the Integrated Scale:
The SL-71 includes an internal graduated scale for measuring small components or features. This scale is visible through the eyepiece when the magnifier is in use.
- Align the object to be measured with the markings on the scale visible within the lens.
- The scale provides measurements in millimeters (0.5mm increments) and inches (1/32 inch increments).
એક ક્લોઝ-અપ view through the Engineer SL-71 magnifier, clearly showing the integrated 1/32 inch scale superimposed on a microchip on a circuit board, used for precise measurements.
A diagram illustrating the integrated graduated scale as seen through the magnifier, showing markings for 0.5mm and 1/32 inch measurements.
5. જાળવણી
લેન્સની સફાઈ:
To maintain optimal clarity, keep the lens clean. Use a soft, lint-free cloth specifically designed for optical lenses. Avoid abrasive materials or harsh chemicals, which can damage the lens coating.
બેટરી રિપ્લેસમેન્ટ:
When the LED illumination dims or fails to turn on, it is time to replace the batteries. Follow the battery installation steps outlined in Section 3.
સંગ્રહ:
Store the magnifier in a clean, dry place away from direct sunlight and extreme temperatures. While the lens is scratch-resistant, proper storage helps prevent dust accumulation and potential damage.
6. મુશ્કેલીનિવારણ
- LED પ્રકાશતું નથી:
- યોગ્ય ધ્રુવીયતા સાથે બેટરી યોગ્ય રીતે દાખલ કરવામાં આવી છે કે કેમ તે તપાસો.
- Replace the batteries with fresh C-type batteries.
- Ensure the power switch is fully engaged in the 'on' position.
- છબી ઝાંખી અથવા અસ્પષ્ટ છે:
- Ensure the magnifier's faceplate is placed directly on the object being inspected. The focal point is fixed.
- Clean the lens surface using a soft, lint-free cloth.
7. સ્પષ્ટીકરણો
| બ્રાન્ડ | એન્જીનીયર |
| મોડલ નંબર | SL-71 |
| વિસ્તૃતીકરણ | 10x |
| લેન્સ સામગ્રી | કાચ |
| રોશની | એલઇડી |
| બેટરી જરૂરી છે | 2 x C type (included) |
| ઉત્પાદન પરિમાણો | 6.93 x 2.05 x 0.1 ઇંચ |
| વસ્તુનું વજન | 188 ગ્રામ (6.63 ઔંસ) |
| રંગ | કાળો, સફેદ |
| સંકલિત સ્કેલ | 20mm graduated scale (0.5mm / 1/32 inch) |
8. વોરંટી અને સપોર્ટ
Warranty information for the Engineer SL-71 LED Flashlight Magnifier is typically provided at the time of purchase or included with the product packaging. For specific warranty details, claims, or technical support, please refer to the documentation accompanying your product or contact the manufacturer directly through their official webસાઇટ
