VOLTCRAFT SDM-115 Coating Thickness Gauge User Manual

1. પરિચય

The VOLTCRAFT SDM-115 Coating Thickness Gauge is designed to quickly and accurately measure the coating thickness on metallic surfaces. This device helps determine if a painted or repaired surface requires repainting or further repair. It is suitable for use on both ferromagnetic (e.g., steel) and non-ferromagnetic (e.g., aluminum) metals, offering a measurement range of 0-1000 µm.

2. સલામતી માહિતી

ઉપકરણ ચલાવતા પહેલા કૃપા કરીને બધી સલામતી સૂચનાઓ વાંચો અને સમજો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ઉપકરણને ઇજા અથવા નુકસાન પહોંચાડી શકે છે.

• ઉપકરણને પાણી અને ભેજથી દૂર રાખો.
• ઉપકરણ ખોલવાનો કે તેમાં ફેરફાર કરવાનો પ્રયાસ કરશો નહીં. બધી સર્વિસિંગ લાયક કર્મચારીઓને સોંપો.
• Use only the specified battery type. Ensure correct polarity when installing batteries.
• ઉપકરણને અતિશય તાપમાન અથવા સીધા સૂર્યપ્રકાશમાં લાવવાનું ટાળો.
• બાળકોની પહોંચથી દૂર રાખો.

3. ઉત્પાદન ઓવરview

The VOLTCRAFT SDM-115 is a handheld coating thickness gauge featuring an ergonomic design for comfortable use. It includes a digital display and intuitive control buttons for calibration, unit selection, and backlight control.

આકૃતિ 3.1: આગળ view of the VOLTCRAFT SDM-115 Coating Thickness Gauge, showing the display and control buttons.

મુખ્ય લક્ષણો:

• Measures coating thickness on ferromagnetic and non-ferromagnetic metals.
• Measurement range: 0-1000 µm.
• Two-point calibration for enhanced accuracy.
• Digital display with backlight.
• Unit selection between mils and micrometers (µm).

આકૃતિ 3.2: બાજુ view of the VOLTCRAFT SDM-115, highlighting its ergonomic design and trigger.

4. સેટઅપ

4.1 બેટરી ઇન્સ્ટોલેશન

The VOLTCRAFT SDM-115 requires batteries for operation (not included). To install batteries:

1. Locate the battery compartment cover, typically on the handle of the device.
2. કમ્પાર્ટમેન્ટ ખોલવા માટે કવર સ્લાઇડ કરો અથવા અનક્લિપ કરો.
3. Insert the required batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.

5. ઓપરેટિંગ સૂચનાઓ

5.1 પાવરિંગ ચાલુ/બંધ

Press and hold the trigger or power button (if available) to turn the device on. The display will illuminate. To turn off, press and hold the same button or wait for automatic shutdown.

5.2 એક માપન લેવું

To take an accurate coating thickness measurement:

1. Ensure the measurement surface is clean, dry, and free of debris.
2. Place the sensor head of the gauge firmly and perpendicularly onto the surface to be measured.
3. The device will automatically display the coating thickness reading on the screen.
4. Lift the device from the surface to prepare for the next measurement.

આકૃતિ 5.1: The VOLTCRAFT SDM-115 being used to measure a surface.

5.3 માપન એકમો બદલવું

The device supports measurement in both mils and micrometers (µm). To switch between units, press the button labeled mils/µm નિયંત્રણ પેનલ પર.

6. માપાંકન

For optimal accuracy, especially when measuring different materials or after prolonged use, two-point calibration is recommended. The device features a CAL button for initiating the calibration process.

While the exact steps for two-point calibration may vary, generally it involves:

1. Placing the gauge on a known zero-thickness surface (e.g., bare metal).
2. દબાવીને CAL button and following on-screen prompts to set the zero point.
3. Placing the gauge on a surface with a known standard thickness (e.g., a calibration foil).
4. દબાવીને CAL button again and using the arrow buttons to adjust the reading to match the known standard thickness.
5. Confirming the calibration.

Refer to the detailed instructions provided with your specific calibration foils or the full product manual for precise calibration procedures.

7. જાળવણી

7.1 સફાઈ

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the sensor head is kept clean and free of dust or residue for accurate readings.

7.2 સંગ્રહ

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.

8. મુશ્કેલીનિવારણ

• ઉપકરણ ચાલુ થતું નથી: બેટરી ઇન્સ્ટોલેશન તપાસો અને ખાતરી કરો કે બેટરી ખાલી નથી થઈ ગઈ. જો જરૂરી હોય તો બેટરી બદલો.
• અચોક્કસ અથવા અસંગત વાંચન:
  • Ensure the sensor head is clean and free of debris.
  • Perform a two-point calibration as described in Section 6.
  • Verify the measurement surface is clean, dry, and flat.
  • Ensure the device is placed perpendicularly and firmly on the surface.
• Device beeps excessively or shows unusually high values: This often indicates a need for calibration. Follow the calibration steps in Section 6 carefully. Ensure you are using appropriate calibration standards.

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact VOLTCRAFT customer service directly. Please have your model number (SDM-115) and article number (100847) available when contacting support.