Steinel 11221 Digi-Check 3 Digital Voltage પરીક્ષક

1. પરિચય

Thank you for choosing the Steinel 11221 Digi-Check 3 Digital Voltage Tester. This device is designed for reliable and accurate electrical measurements, including AC/DC voltage, phase, polarity, and continuity. Please read this manual thoroughly before use to ensure safe and optimal operation.

મુખ્ય લક્ષણો:

• ડિજિટલ વોલ્યુમtage testing for AC and DC up to 999 volts.
• Microprocessor-controlled for enhanced accuracy.
• Integrated phase and polarity testing functions.
• Continuity testing with a range of 0 to 500 kOhm.
• Clear digital display and LED indicators for easy reading.

2. સલામતી સૂચનાઓ

ઉપકરણને ઇજા કે નુકસાન ન થાય તે માટે હંમેશા નીચેની સલામતી સાવચેતીઓનું પાલન કરો:

• Do not use the device if it appears damaged or is not functioning correctly.
• Ensure your hands are dry and you are standing on an insulated surface when performing electrical tests.
• Always verify the tester's functionality on a known live circuit before and after use.
• મહત્તમ રેટ કરેલ વોલ્યુમને ઓળંગશો નહીંtage 999V AC/DC.
• This device is intended for professional use or by individuals with adequate electrical knowledge.
• ઉપકરણને બાળકોથી દૂર રાખો.
• Refer to local electrical safety regulations and standards.

3. ઉત્પાદન ઓવરview

The Steinel 11221 Digi-Check 3 consists of a main unit with a digital display and control buttons, and a separate test probe connected by a flexible cable.

Image 1: Steinel 11221 Digi-Check 3 Digital Voltage Tester. The image shows the main unit with a digital display and two orange buttons (HOLD and TEST), and a separate black test probe connected by a grey cable. Both probes have pointed tips.

ઘટકો:

1. મુખ્ય એકમ: Houses the digital display, LEDs, and control buttons.
2. Test Probe (Red): Integrated into the main unit.
3. Test Probe (Black): Separate probe connected via cable.
4. ડિજિટલ ડિસ્પ્લે: વોલ્યુમ બતાવે છેtage readings and other indicators.
5. એલઇડી સૂચકાંકો: Provide visual feedback for various tests.
6. હોલ્ડ બટન: ડિસ્પ્લે પર વર્તમાન વાંચનને સ્થિર કરે છે.
7. પરીક્ષણ બટન: Initiates specific test functions (e.g., continuity).

4. સેટઅપ

The Steinel 11221 Digi-Check 3 is ready for use upon receipt. No initial battery installation is required as it is powered via the circuit being tested or an internal power source (if applicable, check product specifications for details on internal power). Ensure the probes and cable are free from damage before each use.

• Inspect the device for any visible damage to the casing, probes, or cable.
• Clean the probe tips if necessary to ensure good electrical contact.
• Perform a quick functional check on a known voltage source (e.g., a wall outlet) to confirm the device is operating correctly before testing unknown circuits.

5. ઓપરેટિંગ સૂચનાઓ

5.1. વોલ્યુમtage માપન (AC/DC)

1. Connect the red probe to the positive or live terminal and the black probe to the negative or neutral/ground terminal of the circuit to be measured.
2. The digital display will automatically show the measured voltage value (AC or DC).
3. Observe the polarity indicator on the display for DC voltagઇ માપન.
4. દબાવો પકડી રાખો ડિસ્પ્લે પર વર્તમાન રીડિંગ ફ્રીઝ કરવા માટે બટન. રિલીઝ કરવા માટે ફરીથી દબાવો.

5.2. Phase Testing

To perform a phase test:

1. Touch the red probe to the conductor you wish to test for phase.
2. Simultaneously, touch the black probe to a known ground or neutral point.
3. The device will indicate the presence of phase voltage through an LED or specific display icon.

5.3. Polarity Testing

For DC circuits, the device automatically indicates polarity:

• ડીસી વોલ્યુમ માપતી વખતેtage, the digital display will show a '+' or '-' symbol next to the voltage reading, indicating the polarity of the red probe relative to the black probe.

5.4. સાતત્ય પરીક્ષણ

To check for continuity in a circuit or component:

1. Ensure the circuit is de-energized before performing continuity tests.
2. Touch the red and black probes to the two points you wish to test for continuity.
3. દબાવો ટેસ્ટ button (if required, some models automatically detect continuity).
4. A low resistance reading (e.g., near 0 Ohm) and/or an audible tone/LED indicator signifies continuity. The device can test continuity up to 500 kOhm.

6. જાળવણી

• સફાઈ: ઉપકરણને સોફ્ટ સાથે સાફ કરો, ડીamp cloth. Do not use abrasive cleaners or solvents. Ensure the device is dry before storage or next use.
• સંગ્રહ: વોલ્યુમ સ્ટોર કરોtage tester in a dry, cool place, away from direct sunlight and extreme temperatures.
• ચકાસણી નિરીક્ષણ: Regularly check the test probes and cable for cuts, cracks, or other damage. Replace if any damage is found.
• પાવર સ્ત્રોત: As the device is powered by the circuit under test or an internal source, no user-replaceable batteries are typically required. Refer to the product's specific technical data for any internal battery information.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

Steinel products are manufactured to high-quality standards and undergo rigorous quality control. For warranty information, technical support, or service inquiries, please refer to the official Steinel webસાઇટ પર જાઓ અથવા તમારા સ્થાનિક વિતરકનો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

વધુ સહાય માટે, કૃપા કરીને મુલાકાત લો Steinel official webસાઇટ.