જેબીએલ એસtage 602 6-1/2" 2-વે કોએક્સિયલ કાર ઓડિયો સ્પીકર્સ યુઝર મેન્યુઅલ

પરિચય

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance.

મુખ્ય લક્ષણો

• સ્પીકરનો પ્રકાર: 6.5" Stage Series 2-Way Coaxial Car Speakers
• શંકુ સામગ્રી: Injection-molded polypropylene cone for enhanced durability and sound quality.
• ટ્વીટર: PEI Balanced Dome Tweeter for clear high-frequency reproduction.
• અવબાધ: 4 ohms, optimized for compatibility with a wide range of car audio systems.
• આવર્તન પ્રતિસાદ: 55 - 22000 Hz, providing a broad audio spectrum.
• સંવેદનશીલતા: 91dB, ensuring efficient power conversion into sound.
• પાવર હેન્ડલિંગ: 135W Peak / 45W RMS per speaker.
• Top-Mount Depth: 2-5/16" for flexible installation.

પેકેજ સામગ્રી

તમારું JBL Stage 602 speaker package typically includes the following items:

• Two (2) JBL Stage 602 6-1/2" Coaxial Speakers
• Two (2) Speaker Grilles
• માઉન્ટિંગ હાર્ડવેર (સ્ક્રૂ, ક્લિપ્સ)
• Speaker Brackets (for various mounting options)
• Speaker Foam (for minimizing unwanted sounds/vibrations)
• Owner's Manual / Documentation

સેટઅપ અને ઇન્સ્ટોલેશન

Proper installation is crucial for optimal sound performance and speaker longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

1. સુરક્ષા સાવચેતીઓ

• Disconnect the vehicle's battery before starting any electrical work.
• આંખના રક્ષણ સહિત યોગ્ય સુરક્ષા સાધનો પહેરો.
• Ensure all wiring is correctly connected to prevent damage to the speakers or vehicle's electrical system.
• Avoid overtightening screws to prevent stripping or damaging mounting surfaces.

2. સ્થાપન માટે તૈયારી

1. હાલના સ્પીકર્સ દૂર કરો: Carefully remove the existing car audio speakers from their mounting locations (e.g., door panels, rear deck). This may involve removing trim panels, screws, and disconnecting wiring.
2. ફિટમેન્ટ તપાસો: Compare the JBL Stage 602 speakers with the original speakers and the mounting location. Use the provided mounting brackets if necessary to ensure a secure fit.
3. વાયરિંગ: Identify the positive (+) and negative (-) speaker wires from your vehicle's audio system. Ensure proper polarity when connecting the new speakers.

3. સ્પીકર માઉન્ટિંગ

1. સુરક્ષિત સ્પીકર્સ: Place the JBL Stage 602 speakers into the prepared mounting locations. Use the provided screws to secure them firmly. If using mounting brackets, attach the brackets first, then the speakers to the brackets.
2. Apply Foam: Apply the included speaker foam around the speaker's edge where it meets the mounting surface. This helps to minimize vibrations and improve sound quality by creating a better seal.
3. વાયરિંગ કનેક્ટ કરો: Connect the vehicle's speaker wires to the terminals on the JBL Stage 602 speakers. Ensure the positive (+) wire connects to the positive terminal and the negative (-) wire connects to the negative terminal.
4. ગ્રિલ્સ ઇન્સ્ટોલ કરો: If desired, attach the speaker grilles over the speakers.
5. ફરીથી એસેમ્બલ કરો: Reassemble any removed trim panels or components.

4. General Installation Guidance

For a visual guide on upgrading car audio speakers, including insights into speaker components and mounting options, refer to the video below. This video provides general information applicable to JBL GTO series speakers, which share similar installation principles.

તમારા સ્પીકર્સનું સંચાલન

એકવાર ઇન્સ્ટોલ થઈ ગયા પછી, તમારું JBL Stage 602 speakers will operate as part of your vehicle's existing audio system. No specific operational controls are on the speakers themselves.

• ઓડિયો સ્ત્રોત: Play audio through your car's head unit (radio, CD player, media player).
• વોલ્યુમ નિયંત્રણ: Adjust the volume using your head unit's controls.
• ટોન નિયંત્રણો: Utilize your head unit's equalizer (EQ), bass, treble, and balance/fader controls to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• બ્રેક-ઇન સમયગાળો: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their optimal sound performance.

જાળવણી અને સંભાળ

તમારા JBL S ના લાંબા સમય સુધી અને સતત પ્રદર્શનની ખાતરી કરવા માટેtage 602 speakers, follow these maintenance guidelines:

• સફાઈ: સ્પીકરની ગ્રિલ્સ અને તેની આસપાસના ભાગને નરમ, સૂકા કપડાથી હળવેથી સાફ કરો. કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સનો ઉપયોગ કરવાનું ટાળો.
• અતિશયોક્તિ ટાળો: Do not drive the speakers with an amplifier that exceeds their recommended RMS power handling (45W RMS per speaker) to prevent damage.
• પર્યાવરણીય પરિબળો: Protect speakers from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
• નિયમિત તપાસ: Periodically check the speaker cones and surrounds for any signs of damage or wear.

મુશ્કેલીનિવારણ

If you experience issues with your speakers, consult the following common troubleshooting steps:

વિશિષ્ટતાઓ

વોરંટી અને આધાર

જેબીએલ એસtage 602 speakers come with a 1 વર્ષની મર્યાદિત વોરંટી. For warranty claims, technical support, or further assistance, please contact JBL customer service or visit the official JBL webસાઇટ

વધારાની ઉત્પાદન માહિતી અને સમર્થન માટે, તમે મુલાકાત લઈ શકો છો એમેઝોન પર JBL સ્ટોર.