Anchor Audio AN-30 AC Powered Speaker Monitor User Manual

1. ઉત્પાદન ઓવરview

The Anchor Audio AN-30 is a compact and powerful AC-powered speaker monitor designed for clear audio reproduction in various settings. Its robust construction and efficient design make it suitable for presentations, small events, and personal monitoring.

આકૃતિ 1.1: ફ્રન્ટ view of the Anchor Audio AN-30 speaker monitor, showcasinતેની કોમ્પેક્ટ ડિઝાઇન અને સ્પીકર ગ્રિલ.

મુખ્ય લક્ષણો:

• AC powered for continuous operation.
• Delivers 109 dB of clear sound output.
• Equipped with a 30W ampજીવંત
• Capable of reaching crowds of 50+ people.
• Lightweight design, weighing only 2.5 lbs.

2. સેટઅપ માર્ગદર્શિકા

This section provides instructions for setting up your AN-30 speaker monitor.

૩.૧ બોક્સમાં શું છે:

• Anchor Audio AN-30 Speaker Monitor
• AC Adapter (if included with your specific package)

2.2 Connecting the Speaker:

Figure 2.1: Rear panel of the AN-30, illustrating the various input and output connections.

1. પાવર કનેક્શન: Locate the "DC IN" port on the rear panel. Connect the provided AC adapter to this port and then plug the adapter into a standard AC power outlet.
2. ઓડિયો ઇનપુટ: The AN-30 features multiple audio input options:
   • Line In (RCA): Use the RCA (red and white) inputs for connecting audio sources such as CD players, mixers, or other line-level devices.
   • Line In (1/4" Jack): Use the 1/4" (6.35mm) jack for connecting instruments, microphones (with appropriate pre-amplification), or other audio equipment.
   Connect your audio source to the desired input.
3. ઓડિયો આઉટપુટ (વૈકલ્પિક): The "LINE OUT" RCA ports allow you to daisy-chain multiple AN-30 units or send the audio signal to another ampલાઇફિયર અથવા રેકોર્ડિંગ ડિવાઇસ.
4. પાવર ચાલુ: Once all connections are secure, flip the "POWER" switch to the ON position. The power indicator light (if present) should illuminate.

3. ઓપરેટિંગ સૂચનાઓ

Follow these steps for optimal performance of your AN-30 speaker monitor.

આકૃતિ 3.1: ફ્રન્ટ view of the AN-30, highlighting the speaker and brand logo.

1. વોલ્યુમ નિયંત્રણ: Adjust the volume knob on the rear panel to achieve the desired audio level. Start with the volume low and gradually increase it to prevent sudden loud sounds.
2. Audio Source Playback: Begin playing audio from your connected source.
3. દેખરેખ: Position the AN-30 speaker monitor to direct sound towards your intended audience or monitoring position. Its compact size allows for versatile placement.
4. પાવર બંધ: When finished, turn the "POWER" switch to the OFF position before disconnecting the AC adapter or audio cables.

4. જાળવણી

Proper care and maintenance will ensure the longevity and optimal performance of your AN-30 speaker monitor.

• સફાઈ: Use a soft, dry cloth to wipe down the exterior of the unit. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker grille or ports. Avoid abrasive cleaners or solvents.
• સંગ્રહ: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, disconnect all cables.
• હેન્ડલિંગ: Always handle the speaker with care. Avoid dropping or subjecting it to strong impacts, which can damage internal components.
• વેન્ટિલેશન: Ensure the speaker's vents are not obstructed during operation to prevent overheating.

5. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your AN-30 speaker monitor.

6. સ્પષ્ટીકરણો

Detailed technical specifications for the Anchor Audio AN-30 AC Powered Speaker Monitor.

7. વોરંટી અને સપોર્ટ

Anchor Audio products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Anchor Audio webસાઇટ

ગ્રાહક આધાર:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Anchor Audio customer support:

• Webસાઇટ: www.anchoraudio.com
• ફોન: નો સંદર્ભ લો webપ્રાદેશિક સંપર્ક નંબરો માટેની સાઇટ.

Please have your product model (AN-30) and serial number ready when contacting support.