Dyson DC35 Digital Slim Multi Floor Cordless Vacuum Cleaner User Manual

1.1 અનપેકિંગ અને એસેમ્બલી

Carefully remove all components from the packaging. Ensure all parts are present before assembly. The main components include the motor unit, wand, motorized cleaner head, and various attachments.

To assemble, connect the wand to the main motor unit until it clicks securely. Then, attach your desired cleaner head or accessory to the end of the wand or directly to the motor unit for handheld use.

1.2 બેટરી ચાર્જ કરી રહી છે

Before first use, fully charge the vacuum cleaner. The Dyson DC35 uses lithium-ion batteries for consistent power.

છબી: The Dyson DC35 charging on its wall-mounted docking station. The docking station provides convenient storage and ensures the vacuum is always ready for use.

1. Install the wall-mounted docking station in a convenient location near a power outlet. Ensure it is securely fastened to the wall.
2. Plug the charger into the docking station and then into a wall outlet.
3. Place the vacuum cleaner onto the docking station. The indicator light on the battery will illuminate to show it is charging.
4. પૂર્ણ ચાર્જ માટે લગભગ 3.5 કલાકનો સમય આપો.

2.1 પાવર મોડ્સ

The Dyson DC35 features two power modes:

• માનક મોડ: Provides up to 15 minutes of powerful fade-free suction for general cleaning.
• મહત્તમ મોડ: Offers 6 minutes of increased suction for more demanding tasks. Activate by pressing the 'MAX' button on the top of the motor unit.

To operate, simply press and hold the power trigger. Release the trigger to turn off the vacuum.

2.2 Cleaning Different Surfaces and Areas

The DC35 is designed for versatile cleaning across various floor types and hard-to-reach areas.

છબી: A user operating the Dyson DC35 on a hard floor, demonstrating its maneuverability and effectiveness for daily cleaning.

• સખત માળ: The motorized cleaner head features anti-static carbon fiber brushes to effectively remove fine dust without damaging delicate surfaces.
• કાર્પેટ: The motorized cleaner head's stiff nylon bristles agitate carpet pile to remove ground-in dirt.
• ઉચ્ચ-પહોંચની સફાઈ: Attach the wand and a suitable accessory (e.g., combination tool) for cleaning ceilings, curtain rails, and other elevated surfaces.

છબી: The Dyson DC35 being used to clean a high window frame, showcasing its lightweight design and extended reach for versatile cleaning tasks.

• Stairs and Upholstery: Remove the wand to use the vacuum in handheld mode with the motorized cleaner head or other attachments for stairs, car interiors, and furniture.

છબી: The Dyson DC35 in its handheld configuration, effectively cleaning carpeted stairs. This demonstrates its adaptability for various surfaces and tight spaces.

2.3 ઉત્પાદન ઓવરview વિડિયો

Watch this official video for a visual demonstration of the Dyson DC35's features and capabilities.

વિડિઓ: An official Dyson video showcasing the DC35 Digital Slim Multi Floor Cordless Vacuum Cleaner, highlighting its powerful digital motor, Root Cyclone technology, and versatility for different cleaning tasks.

3.1 ક્લિયર બિન ખાલી કરવું

Empty the clear bin as soon as the dirt reaches the MAX level mark. Do not overfill.

છબી: A hand demonstrating how to empty the clear bin of the Dyson DC35 directly into a waste receptacle, illustrating the hygienic one-touch release mechanism.

1. વેક્યુમ ક્લીનરને કચરાપેટી પર રાખો.
2. Press the red bin release button located on the side of the motor unit. The bin base will open, and the dirt shroud will slide down, ejecting dirt.
3. Close the bin base firmly until it clicks into place.

3.2 Washing the Filter

Wash the filter at least every month with cold water. Do not use detergents.

1. Twist and lift the filter out from the top of the motor unit.
2. પાણી સાફ ન થાય ત્યાં સુધી ફિલ્ટરને ઠંડા વહેતા પાણીની નીચે ધોઈ લો.
3. Shake excess water off and leave to dry completely for at least 24 hours in a warm place. Ensure it is absolutely dry before replacing.

3.3 Clearing Blockages

If the vacuum loses suction, check for blockages in the cleaner head, wand, and main motor unit intake. Always ensure the vacuum is turned off before checking for blockages.