પરિચય
This manual provides comprehensive instructions for the operation and maintenance of your Sharp SPC500 LCD Alarm Clock. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.

આકૃતિ 1: ફ્રન્ટ view of the Sharp SPC500 LCD Alarm Clock, showing the digital time display and the Sharp logo.
સેટઅપ
1. બેટરી ઇન્સ્ટોલેશન
The Sharp SPC500 LCD Alarm Clock operates on two (2) AAA batteries (not included). Ensure correct polarity when inserting the batteries.
- Locate the battery compartment cover on the back or bottom of the clock.
- કવર દૂર કરો.
- કમ્પાર્ટમેન્ટની અંદર દર્શાવેલ (+) અને (-) ટર્મિનલ્સ સાથે મેળ ખાતી બે નવી AAA બેટરીઓ દાખલ કરો.
- બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બદલો.
2. પ્રારંભિક સમય સેટિંગ
After installing batteries, the display may flash or show a default time. Proceed to set the current time.
ઓપરેટિંગ સૂચનાઓ
વર્તમાન સમય સુયોજિત કરી રહ્યા છે
- Locate the "TIME SET" button, usually on the back or side of the clock. Press and hold it until the time display begins to flash.
- Use the "HOUR" and "MINUTE" buttons (often labeled with arrows or +/-) to adjust the hours and minutes. Pay attention to the AM/PM indicator.
- Press "TIME SET" again to confirm the time and exit the setting mode.
એલાર્મ સમય સુયોજિત કરી રહ્યા છીએ
- Locate the "ALARM SET" button. Press and hold it until the alarm time display begins to flash.
- Use the "HOUR" and "MINUTE" buttons to adjust the desired alarm time. Observe the AM/PM indicator.
- Press "ALARM SET" again to confirm the alarm time.
- Ensure the alarm is activated by sliding the "ALARM ON/OFF" switch or pressing the "ALARM ON" button. An alarm icon (e.g., a bell) should appear on the display.
સ્નૂઝ અને બેકલાઇટ ફંક્શન
- સ્નૂઝ કરો: When the alarm sounds, press the large "SNOOZE/LIGHT" button on top of the clock to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-9 minutes).
- બેકલાઇટ: The clock features a backlight on demand. Press the "SNOOZE/LIGHT" button to illuminate the display for a few seconds, allowing you to view the time in low-light conditions.
લક્ષણો
- 0.5" LCD display for clear time visibility.
- Ascending alarm volume, starting softly and gradually increasing to ensure you wake up.
- Backlight on demand for easy viewઅંધારામાં
- Compact and portable design, ideal for travel or bedside use.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ / ઉકેલ |
|---|---|
| ડિસ્પ્લે ખાલી અથવા ઝાંખું છે. |
|
| Alarm does not sound or is too quiet. |
|
| Backlight does not stay on. |
|
| સમય ખોટો છે. |
|
વિશિષ્ટતાઓ
| બ્રાન્ડ | તીક્ષ્ણ |
| મોડલ | SPC500 |
| ડિસ્પ્લે પ્રકાર | ડિજિટલ એલસીડી |
| પાવર સ્ત્રોત | Battery Powered (2 x AAA batteries, not included) |
| ખાસ લક્ષણો | Alarm, Backlight on demand, Ascending alarm volume |
| પરિમાણો (L x W x H) | 9.53 x 6.22 x 5.08 cm (3.75 x 2.45 x 2 inches approx.) |
| વજન | 68.04 g (2.4 oz approx.) |
જાળવણી
To ensure the longevity and proper functioning of your Sharp SPC500 LCD Alarm Clock, follow these simple maintenance guidelines:
- સફાઈ: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- બેટરી રિપ્લેસમેન્ટ: Replace batteries promptly when the display becomes dim or the clock stops functioning correctly. Remove batteries if the clock will not be used for an extended period to prevent leakage.
- પર્યાવરણ: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or dusty environments.
વોરંટી અને આધાર
The Sharp SPC500 LCD Alarm Clock comes with a 1 વર્ષની મર્યાદિત વોરંટી ખરીદીની તારીખથી. આ વોરંટી સામાન્ય ઉપયોગ હેઠળ ઉત્પાદન ખામીઓને આવરી લે છે.
For warranty claims, technical support, or further assistance, please contact Sharp customer service. Refer to the official Sharp webસૌથી વર્તમાન સંપર્ક માહિતી માટે સાઇટ અથવા તમારા ખરીદી દસ્તાવેજો.
વોરંટી હેતુઓ માટે કૃપા કરીને તમારી ખરીદીનો પુરાવો રાખો.





