Craftsman 139.53753 Garage Door Remote Control Instruction Manual

1. પરિચય

This manual provides detailed instructions for the setup, operation, and maintenance of your Craftsman 139.53753 Garage Door Remote Control. This remote is designed for use with specific garage door openers.

1.1 સુસંગતતા

The Craftsman 139.53753 remote control is compatible with Craftsman, Liftmaster, Do-It, Master-Mechanic, Raynor, and Chamberlain garage door openers that utilize Security+ ERT technology, manufactured in 2005 or later. Key indicators for compatibility include:

• Your garage door opener has a જાંબલી program/learn button on the back or side of the powerhead.
• Your garage door opener has a જાંબલી antenna wire.
• Your original remote control has કાળો બટનો
• Your original remote control or opener indicates "315 MHz" frequency.

મહત્વપૂર્ણ: This remote is not compatible with systems using other types of coding or different learn button colors (e.g., red, orange, green, yellow).

2. સલામતી માહિતી

Please read and understand all safety warnings before operating your garage door opener and remote control. Improper use can result in serious injury or property damage.

• રિમોટ કંટ્રોલને બાળકોની પહોંચની બહાર રાખો.
• Operate the garage door only when it is in full view, free of obstructions, and the opener is properly adjusted.
• Do not allow children to play with the garage door opener or remote control.
• Test the safety reversal system of your garage door opener monthly.
• સ્થાનિક નિયમો અનુસાર બેટરીનો યોગ્ય રીતે નિકાલ કરો.

3. પેકેજ સામગ્રી

તમારા પેકેજમાં નીચેની વસ્તુઓ હોવી જોઈએ:

• Craftsman 139.53753 Garage Door Remote Control
• વિઝર ક્લિપ
• CR2 Lithium Battery (pre-installed or separate)

Image of the Craftsman 139.53753 garage door remote control. It is grey with a large black button at the top and two smaller black buttons below it. A metal clip is attached to the side for visor mounting. The brand 'CRAFTSMAN' and '315' are printed on the bottom front.

4. સેટઅપ અને પ્રોગ્રામિંગ

Follow these steps to program your Craftsman 139.53753 remote control to your compatible garage door opener. Ensure you have access to your garage door opener's motor unit.

1. શીખો બટન શોધો: On your garage door opener's motor unit, locate the જાંબલી learn button. This button is typically found on the back or side panel of the motor unit.
2. લર્ન મોડ સક્રિય કરો: દબાવો અને તરત જ છોડો જાંબલી learn button. The learn indicator light on the opener will illuminate steadily for 30 seconds, indicating it is in programming mode.
3. Program the Remote: Within 30 seconds of activating the learn mode, press and hold the desired button on your new Craftsman remote control.
4. પ્રોગ્રામિંગની પુષ્ટિ કરો: Continue holding the remote button until the garage door opener's light flashes or you hear two clicks. This indicates that the remote has been successfully programmed.
5. રિલીઝ બટન: Release the button on the remote control.
6. ટેસ્ટ ઓપરેશન: Press the programmed button on your remote control to test its operation. The garage door should activate.

If you are programming multiple garage doors, repeat these steps for each door, using a different button on the remote for each opener.

5. રીમોટ કંટ્રોલનું સંચાલન

Your Craftsman 139.53753 remote control is designed for simple operation.

• ગેરેજનો દરવાજો ખોલવો/બંધ કરવો: Press the programmed button on the remote control once to activate your garage door opener. The door will begin to open or close. Pressing the button again during operation will stop the door. Pressing it a third time will reverse its direction.
• બહુવિધ દરવાજા: If you have programmed multiple garage doors to different buttons on your remote, simply press the corresponding button for the desired door.
• Security+ 3-Function: This remote transmits a new security code each time a button is pressed, enhancing security.

6. જાળવણી

6.1 બેટરી રિપ્લેસમેન્ટ

The remote control uses one CR2 Lithium battery. When the remote's range decreases or the indicator light on the remote dims, it is time to replace the battery.

1. Open the Remote Casing: રીમોટ કંટ્રોલ કાળજીપૂર્વક ખોલો casing. This usually involves prying it open with a small flat-head screwdriver at a designated notch.
2. જૂની બેટરી કાઢી નાખો: Remove the old CR2 Lithium battery.
3. નવી બેટરી દાખલ કરો: Insert a new CR2 Lithium battery, ensuring the positive (+) terminal is facing the correct direction as indicated inside the battery compartment.
4. સી બંધ કરોasing: રિમોટ કંટ્રોલને સ્નેપ કરો casinસુરક્ષિત રીતે પાછા ભેગા કરો.
5. દૂરસ્થ પરીક્ષણ: Test the remote control to ensure it is functioning correctly.

નોંધ: સ્થાનિક નિયમો અનુસાર જૂની બેટરીઓનો જવાબદારીપૂર્વક નિકાલ કરો.

7. મુશ્કેલીનિવારણ

If your remote control is not functioning as expected, refer to the following common issues and solutions:

8. સ્પષ્ટીકરણો

• મોડલ નંબર: 139.53753
• બ્રાન્ડ: કારીગર
• આવર્તન: 315 MHz
• સુસંગતતા: Garage door openers with PURPLE learn button (Security+ ERT technology, 2005+)
• બટનોની સંખ્યા: 3 (for up to three garage doors)
• સુરક્ષા સુવિધાઓ: Security+ 3-Function (transmits a new security code every time)
• બેટરીનો પ્રકાર: 1 x CR2 Lithium (not included, but often pre-installed)
• વસ્તુનું વજન: આશરે 2.4 ઔંસ
• પરિમાણો: આશરે ૯.૦૬ x ૪.૮ x ૪.૪૧ ઇંચ (પેકેજ પરિમાણો)
• રંગ: કાળો, રાખોડી

9. વોરંટી અને સપોર્ટ

For warranty information or technical support regarding your Craftsman 139.53753 Garage Door Remote Control, please refer to the documentation provided with your purchase or contact Craftsman customer service directly. Contact details can typically be found on the official Craftsman webસાઇટ પર અથવા તમારા ઉત્પાદન પેકેજિંગ પર.

વધારાના સંસાધનો માટે, તમે મુલાકાત લઈ શકો છો એમેઝોન પર કારીગરોની દુકાન.