પરિચય
This manual provides detailed instructions for the installation, operation, and maintenance of your Schellenberg Maxi 11500 Roller Shutter Winder. Designed for durability and ease of use, this winder is an essential component for your roller shutter system. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
સલામતી સૂચનાઓ
- Always disconnect power to the roller shutter system if applicable before beginning installation or maintenance.
- ઇન્સ્ટોલેશન દરમિયાન યોગ્ય વ્યક્તિગત રક્ષણાત્મક સાધનો, જેમ કે મોજા અને આંખનું રક્ષણ, પહેરો.
- Ensure all components are securely fastened according to the instructions to prevent accidents.
- ઇન્સ્ટોલેશન દરમિયાન બાળકો અને પાલતુ પ્રાણીઓને કાર્યક્ષેત્રથી દૂર રાખો.
- જો તમને કોઈપણ પગલા વિશે ખાતરી ન હોય, તો લાયક વ્યાવસાયિકની સલાહ લો.
ઉત્પાદન ઓવરview
The Schellenberg Maxi 11500 Roller Shutter Winder is a robust and durable component designed for roller shutter systems. It features a strong winding mechanism and comes with a matching cover plate for a clean finish. It is specifically designed for 23 mm wide straps and can handle roller shutters up to 2.5 meters in height with a maximum strap length of 12 meters.
સેટઅપ અને ઇન્સ્ટોલેશન
The winder is designed for installation in a suitable wall box. The installation depth is variable, allowing the spring roller to be adjusted up to 4 cm if needed.
જરૂરી સાધનો:
- સ્ક્રુડ્રાઈવર
- માપન ટેપ
- Drill (if creating a new wall box)
- સ્તર
સ્થાપન પગલાં:
- વોલ બોક્સ તૈયાર કરો: Ensure the wall box is clean and free of debris. The winder requires an opening gap of 260 mm.
- Insert the Winder: Carefully insert the winder mechanism into the wall box.
- Adjust Installation Depth: The spring roller can be moved up to 4 cm to adjust the installation depth between 175 mm and 215 mm. Position the winder to align with the roller shutter strap.
- પટ્ટા જોડો: Feed the 23 mm wide roller shutter strap through the winder's opening and securely attach it to the winding mechanism. Ensure the strap is taut and properly aligned.
- વાઇન્ડર સુરક્ષિત કરો: Use the provided screws to firmly attach the winder to the wall box. Ensure it is level and stable.
- Install the Cover Plate: Place the matching white cover plate over the installed winder and secure it with the remaining screws.
ઓપરેટિંગ સૂચનાઓ
The Schellenberg Maxi 11500 Roller Shutter Winder operates manually to raise and lower your roller shutters.
- To Lower the Roller Shutter: Gently pull the strap downwards. The winder will smoothly release the strap, allowing the roller shutter to descend. Control the speed of descent by maintaining a steady pull.
- To Raise the Roller Shutter: Pull the strap upwards with a consistent motion. The winder will retract the strap, raising the roller shutter. Continue pulling until the desired height is reached.
- Stopping at Desired Height: The winder's internal mechanism will hold the roller shutter at any position when the strap is released.
જાળવણી
Regular maintenance ensures the longevity and smooth operation of your roller shutter winder.
- સફાઈ: Periodically wipe the visible parts of the winder and cover plate with a soft, damp કાપડ ઘર્ષક ક્લીનર્સ ટાળો.
- પટ્ટાનું નિરીક્ષણ: Regularly check the roller shutter strap for any signs of wear, fraying, or damage. A damaged strap should be replaced immediately to prevent malfunction.
- મિકેનિઝમ તપાસ: Listen for any unusual noises during operation. If the winder feels stiff or makes grinding sounds, it may require inspection by a professional. Do not attempt to lubricate the internal spring mechanism unless specifically instructed by the manufacturer.
- સ્ક્રુની કડકતા: Occasionally check that all mounting screws are tight. Loose screws can affect the winder's stability and performance.
મુશ્કેલીનિવારણ
This section addresses common issues you might encounter with your roller shutter winder.
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Winder is stiff or hard to operate. | Accumulated dirt or debris; internal spring issue; strap misalignment. | Clean the visible parts. Check strap alignment. If problem persists, professional inspection may be needed. |
| Strap is frayed or damaged. | Wear and tear; friction against rough edges. | Replace the roller shutter strap immediately. Ensure no sharp edges are present in the strap path. |
| Roller shutter does not stay at desired height. | Winder mechanism worn out; insufficient spring tension. | The winder may need replacement. This issue typically indicates internal wear. |
| Winder makes grinding noises. | Internal component wear or foreign object. | Discontinue use and consult a professional. Do not attempt to open the winder mechanism. |
વિશિષ્ટતાઓ
Technical details for the Schellenberg Maxi 11500 Roller Shutter Winder.
| લક્ષણ | વિગત |
|---|---|
| ઉત્પાદક | શેલેનબર્ગ |
| મોડલ નંબર | 11500 |
| ભાગ નંબર | 11500 |
| વસ્તુનું વજન | 984 ગ્રામ |
| ઉત્પાદન પરિમાણો | 28.8 x 5 x 16.8 સેમી |
| Size (Opening Distance) | 26 સે.મી |
| રંગ | ગ્રે |
| શૈલી | Including Block (Single) |
| સામગ્રી | ગેલ્વેનાઈઝ્ડ |
| Max. Roller Shutter Height | 2.5 મીટર |
| Max. Strap Length | 12 મીટર |
| પટ્ટાની પહોળાઈ સુસંગતતા | 23 મીમી |
| સ્થાપન ઊંડાઈ | Adjustable between 175 mm and 215 mm |
| સમાવાયેલ ઘટકો | 1 x winder, 1 x cover plate, 2 x screws |
| બેટરી જરૂરી છે | ના |
| ASIN | B0067XVCU6 |
| પ્રથમ ઉપલબ્ધ તારીખ | 2 ફેબ્રુઆરી, 2022 |
વોરંટી અને આધાર
For warranty information and technical support, please refer to the official Schellenberg webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
Webસાઇટ: www.schellenberg.de
સંપર્ક: અધિકારીના સંપર્ક વિભાગનો સંદર્ભ લો webપ્રાદેશિક સપોર્ટ વિગતો માટે સાઇટ.
