હિઓકી હાઇટેસ્ટર 3282 ટ્રુ આરએમએસ સીએલamp-મીટર

પરિચય

This manual provides comprehensive instructions for the safe and effective use of the Hioki HiTester 3282 True RMS Clamp-Meter. It covers product features, setup, operation, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before using the instrument to ensure proper functionality and safety.

સલામતી માહિતી

Always observe the safety precautions described in this manual to prevent electric shock, injury, or damage to the instrument. This device is designed for professional use in electrical testing environments.

• વોલ્યુમ માપવાનો પ્રયાસ કરશો નહીંtage or current exceeding the specified maximum ratings.
• Ensure the instrument is in good working condition before use. Do not use if damaged.
• Always use the correct function and range for your measurement.
• Wear appropriate personal protective equipment (PPE) when working with electrical circuits.
• The Hioki 3282 meets EN safety standard 61010 and is rated for CAT IV installations up to 600V. This rating covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment.

ઉત્પાદન લક્ષણો

The Hioki HiTester 3282 is a versatile digital clamp-meter designed for accurate electrical measurements. Key features include:

• ડિજિટલ ક્લamp-meter measures AC current up to 1,000A.
• માપો એસી વોલ્યુમtage 600V સુધી.
• Measures frequency up to 1,000Hz.
• Measures resistance up to 10 kilohms.
• True RMS sensing for accurate readings on linear or non-linear loads, regardless of waveform.
• Clamp with 46mm (1.81 inches) jaw opening for non-contact current measurement.
• Crest factor function (1.00 to 5.00 scale) to assess AC signal quality.
• Record function for displaying maximum, minimum, and average readings.
• Data hold function to freeze the most recent reading on the display.
• Continuity buzzer for circuit conductivity checks.
• Auto-ranging capability.
• Automatic power-off after 10 minutes of non-use to conserve battery life.
• ઓછી બેટરી સૂચક.

બૉક્સમાં શું છે

Upon opening the product packaging, verify that all the following items are present:

• Hioki 3282 digital clamp-મીટર
• ટેસ્ટ લીડ સેટ
• 9V 6F22 બેટરી
• હાથનો પટ્ટો
• વહન કેસ
• સૂચનાઓ (આ માર્ગદર્શિકા)

ઉત્પાદન ઓવરview

The image below illustrates the main components of the Hioki 3282 Clamp-મીટર.

આકૃતિ 1: આગળ view of the Hioki 3282 Clamp-Meter. It features a yellow clamp jaw at the top, a dark gray body with a digital display, and various control buttons. The display shows "AUTO ~ 1000 RMS A" and a bar graph. Below the display are input terminals labeled "COM" and "VΩTEMP". Safety ratings "CAT IV ~600V" and "CE RMS" are also visible.

The meter's main components include:

• Clamp જડબાં: The yellow, pincer-like part at the top, used to encircle a conductor for non-contact current measurement.
• કાર્ય બટનો: Located below the display, these buttons control various measurement modes and features such as POWER, RANGE, HOLD, MAX/MIN/PEAK, SLOW, Hz, and Ω/TEMP.
• ડિજિટલ ડિસ્પ્લે: A 3,000-count LCD screen that shows numerical readings and a 35-segment bar graph.
• ઇનપુટ ટર્મિનલ્સ: Sockets at the bottom for connecting test leads for voltage, resistance, and frequency measurements. Labeled "COM" (common) and "VΩTEMP" (voltage, પ્રતિકાર, તાપમાન).

સેટઅપ

1. બેટરી ઇન્સ્ટોલેશન:

   The Hioki 3282 operates on a single 9V 6F22 battery. Locate the battery compartment on the rear of the unit, open it, insert the battery observing polarity, and securely close the compartment.

2. Connecting Test Leads (for Voltage, Resistance, Frequency):

   For measurements other than current, insert the black test lead into the "COM" (common) terminal and the red test lead into the "VΩTEMP" terminal.
3. Attaching Hand Strap:

   Attach the provided hand strap to the designated loop on the meter for secure handling during operation.

ઓપરેટિંગ સૂચનાઓ

This section details how to perform various measurements and utilize the functions of your Hioki 3282 Clamp-મીટર.

1. પાવર ચાલુ/બંધ

• દબાવો પાવર button (blue button) to turn the unit on.
• The unit will automatically power off after approximately 10 minutes of inactivity to conserve battery life.
• To manually turn off the unit, press and hold the પાવર બટન

૩. એસી કરંટ માપન (Clamp)

1. ખાતરી કરો કે મીટર ચાલુ છે.
2. દબાવો Ã button (AC current symbol) to select AC current measurement mode. The display will show "A" and the AC symbol.
3. cl ખોલોamp jaws by pressing the lever.
4. Encircle a single conductor with the clamp jaws. Ensure the jaws are fully closed around the conductor.
5. Read the AC current value on the digital display. The meter is True RMS sensing, providing accurate readings for various waveforms.

3. એસી વોલ્યુમtage માપન

1. Connect the black test lead to the "COM" terminal and the red test lead to the "VΩTEMP" terminal.
2. દબાવો V button (AC voltage symbol) to select AC voltage measurement mode. The display will show "V" and the AC symbol.
3. Carefully touch the test probes to the points in the circuit where you want to measure AC voltage.
4. એસી વોલ્યુમ વાંચોtagડિજિટલ ડિસ્પ્લે પર e મૂલ્ય.

4. પ્રતિકાર માપન

1. Connect the black test lead to the "COM" terminal and the red test lead to the "VΩTEMP" terminal.
2. દબાવો Ω/TEMP button to select resistance measurement mode. The display will show "Ω".
3. Ensure the circuit or component under test is de-energized before connecting the test probes.
4. Touch the test probes across the component or circuit path.
5. ડિજિટલ ડિસ્પ્લે પર પ્રતિકાર મૂલ્ય વાંચો.

5. આવર્તન માપન

1. Connect the black test lead to the "COM" terminal and the red test lead to the "VΩTEMP" terminal.
2. દબાવો Hz button to select frequency measurement mode. The display will show "Hz".
3. Carefully touch the test probes to the points in the circuit where you want to measure frequency.
4. Read the frequency value on the digital display.

6. Continuity Check

1. Connect the black test lead to the "COM" terminal and the red test lead to the "VΩTEMP" terminal.
2. દબાવો Ω/TEMP button. The meter's description states "A continuity buzzer confirms that the circuit conducts electricity." This function is typically integrated with resistance measurement.
3. Ensure the circuit or component under test is de-energized.
4. Touch the test probes across the circuit path. If continuity exists (low resistance), the buzzer will sound.

7. Data Hold Function

• દબાવો પકડી રાખો button (yellow button) to freeze the current reading on the display. This is useful for taking readings in difficult-to-view સ્થાનો
• દબાવો પકડી રાખો button again to release the held reading and return to live measurement.

8. MAX/MIN/AVG Record Function

• દબાવો MAX/MIN/PEAK button to activate the record function. The meter will begin recording the maximum, minimum, and average values of the selected measurement.
• Press the button repeatedly to cycle through MAX, MIN, and AVG readings.
• To exit the record function, press and hold the MAX/MIN/PEAK બટન

9. Crest Factor Function

• The crest factor function is used to measure the quality of an AC signal. It operates on a 1.00 to 5.00 scale.
• Refer to the specific instructions for activating and interpreting the crest factor, which may be integrated with other functions or a dedicated button (not explicitly visible on the image, but mentioned in description).

10. Auto-Ranging

• The Hioki 3282 is an auto-ranging meter, meaning it automatically selects the appropriate measurement range for the property being measured. This simplifies operation as manual range selection is not typically required.
• આ બદલો button can be used to manually select a range if desired, or to exit auto-ranging mode.

જાળવણી

• સફાઈ: Wipe the instrument with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampપાણી અને હળવા ડિટર્જન્ટથી ભેળવવામાં આવે છે. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• બેટરી રિપ્લેસમેન્ટ: When the low-battery indicator appears on the display, replace the 9V 6F22 battery promptly to ensure accurate measurements. Refer to the "Battery Installation" section under Setup for instructions.
• સંગ્રહ: When not in use for extended periods, remove the battery to prevent leakage. Store the meter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• માપાંકન: For continued accuracy, periodic calibration by qualified personnel is recommended. Consult Hioki for calibration services.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

The following table outlines the key technical specifications for the Hioki 3282 Clamp-મીટર.

વોરંટી માહિતી

Specific warranty terms and conditions for the Hioki HiTester 3282 are provided by the manufacturer at the time of purchase. Please refer to the warranty card included with your product or contact Hioki customer support for detailed information regarding warranty coverage and service.

આધાર અને સંપર્ક

For technical assistance, service, or further inquiries regarding your Hioki 3282 Clamp-Meter, please contact Hioki directly.

• ઉત્પાદક: Hioki Corporation
• મુખ્ય મથક: જાપાન
• યુએસ ઓફિસ: Cranbury, NJ
• For the most current contact information, please visit the official Hioki webસાઇટ પર જાઓ અથવા તમારા ઉત્પાદન પેકેજિંગમાં આપેલી સંપર્ક વિગતોનો સંદર્ભ લો.