Saxby Omega 1W LED Motion Sensor Bathroom Mirror Light with Shaver Socket & Shelf

1. ઉત્પાદન ઓવરview

The Saxby Omega Bathroom Mirror is a modern, energy-efficient lighting solution designed for bathroom environments. It integrates a 1W LED light, a motion sensor for convenient operation, and a built-in shaver socket, all within a mirrored glass and matt silver frame. This product also features a practical shelf for bathroom essentials.

આકૃતિ 1: ફ્રન્ટ view of the Saxby Omega Bathroom Mirror, showcasing its sleek design, integrated LED lights at the top, and a glass shelf with a shaver socket below.

2. સલામતી માહિતી

ઇન્સ્ટોલેશન અને ઉપયોગ કરતા પહેલા કૃપા કરીને બધી સૂચનાઓ કાળજીપૂર્વક વાંચો. ભવિષ્યના સંદર્ભ માટે આ માર્ગદર્શિકા જાળવી રાખો.

• ઇલેક્ટ્રિકલ સલામતી: Installation must be carried out by a qualified electrician in accordance with current wiring regulations (e.g., IEE Wiring Regulations). Ensure the mains supply is switched off at the consumer unit/fuse board before commencing installation or maintenance.
• બાથરૂમ ઝોન્સ: This product is rated IP44, making it suitable for bathroom zone 2. It can be used in bathroom zone 1 if installed in conjunction with a 30mA RCD (Residual Current Device). Do not install in zone 0.
• હેન્ડલિંગ: The mirror is made of glass. Handle with care to prevent breakage and injury.
• સફાઈ: Always disconnect power before cleaning. Use only a soft, dry cloth. Avoid abrasive cleaners or solvents.
• વેન્ટિલેશન: Ensure adequate ventilation around the unit as per installation guidelines.

આકૃતિ 2: ક્લોઝ-અપ view highlighting the IP44 rating and the integrated shaver socket, indicating suitability for specific bathroom zones.

3. પેકેજ સામગ્રી

ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે અને તેમને કોઈ નુકસાન થયું નથી.

• Saxby Omega Bathroom Mirror Unit (with integrated LED, motion sensor, shaver socket, and shelf)
• Installation Fixings (screws, wall plugs)
• સૂચના માર્ગદર્શિકા

4. સેટઅપ અને ઇન્સ્ટોલેશન

Installation should only be performed by a qualified electrician. Ensure the mounting surface is suitable to support the weight of the mirror (approximately 6.95 kg).

1. તૈયારી: Switch off the main electrical supply at the consumer unit/fuse board. Identify the desired mounting location, ensuring it is within the appropriate bathroom zone and away from direct water spray.
2. માર્કિંગ: Carefully mark the drilling points on the wall using the mirror's mounting brackets as a template.
3. શારકામ: Drill holes at the marked points, ensuring not to damage any hidden wiring or pipes. Insert appropriate wall plugs.
4. વાયરિંગ: Connect the mirror's electrical wiring to the mains supply according to the wiring diagram provided with the product and local electrical regulations. Ensure all connections are secure and insulated.
5. માઉન્ટ કરવાનું: Secure the mirror to the wall using the provided fixings. Ensure it is level and firmly attached.
6. અંતિમ તપાસ: Once installed, switch the main electrical supply back on and test the mirror's functions.

આકૃતિ 3: સાઇડ પ્રોfile of the mirror illustrating its projection from the wall and the location of the shaver socket. Dimensions are H: 500mm, W: 390mm, Proj: 160mm.

5. ઓપરેટિંગ સૂચનાઓ

• એલઇડી લાઇટિંગ: The mirror features integrated 1W LED lights (2 x 1W LED capsule, cool white). These lights are activated by the motion sensor.
• Motion Sensor (IR Switch): The mirror is equipped with an infrared (IR) motion sensor. To activate the light, simply wave your hand within the sensor's detection range (typically 5-10 cm) in front of the sensor area. Wave again to turn off the light.
• શેવર સોકેટ: The built-in shaver socket is designed for use with electric shavers and electric toothbrushes. Ensure the appliance is compatible with the socket's voltage and current rating before use. Do not use for high-power appliances.
• સંકલિત શેલ્ફ: The glass shelf provides a convenient storage space for small bathroom items. Do not overload the shelf.

6. જાળવણી

Regular maintenance will ensure the longevity and appearance of your mirror.

• અરીસાની સફાઈ: Disconnect power before cleaning. Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror surface, to avoid liquid ingress into electrical components.
• Cleaning the Shelf: The glass shelf can be cleaned with a damp કાપડ અને હળવા ડીટરજન્ટ. સારી રીતે સુકવી લો.
• સામાન્ય સંભાળ: Do not use harsh chemicals, abrasive materials, or scouring pads, as these can damage the mirror finish or electrical components.

Figure 4: Detail of the integrated glass shelf and the robust construction from glass and steel materials.

7. મુશ્કેલીનિવારણ

If you encounter issues with your Saxby Omega Mirror, refer to the following common problems and solutions:

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Saxby Lighting directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.

સત્તાવાર Webસાઇટ: www.saxbylighting.com