unitech MS840-SUBBGC-SG

Unitech MS840 Rugged Handheld Laser Scanner

Model: MS840-SUBBGC-SG

1. પરિચય

The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.

Unitech MS840 Rugged Handheld Laser Scanner

Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.

2. સલામતી માહિતી

Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

4. સેટઅપ

Follow these steps to set up your Unitech MS840 scanner:

  1. યુએસબી કેબલને કનેક્ટ કરો:

    Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).

  2. ડ્રાઇવર ઇન્સ્ટોલેશન:

    The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.

  3. પ્રારંભિક કસોટી:

    Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.

૪. સ્કેનરનું સંચાલન

The Unitech MS840 is designed for simple and efficient barcode scanning.

  1. પાવર ચાલુ: The scanner powers on automatically when connected to a powered USB port.
  2. લક્ષ્ય: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
  3. સ્કેનિંગ: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
  4. Successful Scan Indication: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
  5. સપોર્ટેડ બારકોડ્સ: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.

6. જાળવણી

Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.

7. મુશ્કેલીનિવારણ

If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:

સમસ્યા સંભવિત કારણ ઉકેલ
સ્કેનર ચાલુ નથી થઈ રહ્યું. USB કેબલ યોગ્ય રીતે જોડાયેલ નથી અથવા ખામીયુક્ત USB પોર્ટ. Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer.
સ્કેનર બારકોડ વાંચતો નથી. Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window.
સ્કેન કરેલો ડેટા સ્ક્રીન પર દેખાતો નથી. Application not in focus, incorrect keyboard layout, or driver issue. Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status.
Scanner beeps but no data. Data transmission issue or application not ready. Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue.

If the problem persists after trying these solutions, please contact Unitech customer support.

8. સ્પષ્ટીકરણો

Detailed technical specifications for the Unitech MS840 scanner:

લક્ષણ વર્ણન
બ્રાન્ડ યુનિટેક
મોડલ MS840-SUBBGC-SG
સ્કેનર પ્રકાર Hand-held Laser Scanner
સ્કેન એલિમેન્ટ પ્રકાર લેસર
Scan Speed / Rate 100 scans/second (100 fps)
કનેક્ટિવિટી ટેકનોલોજી કેબલ (યુએસબી)
ઈન્ટરફેસ પ્રકાર યુએસબી
સુસંગત ઉપકરણો લેપટોપ, ડેસ્કટોપ
ઉત્પાદનના પરિમાણો (LxWxH) 2.54 x 2.54 x 2.54 cm (25 x 25 x 25 Millimeters)
વસ્તુનું વજન 454 ગ્રામ (453.59 ગ્રામ)
બેટરી જરૂરી છે ના
ASIN B00C4OGY2I
વૈશ્વિક વેપાર ઓળખ નંબર (GTIN) 00132017875439
પ્રથમ ઉપલબ્ધ તારીખ 30 એપ્રિલ 2013

9. વોરંટી અને સપોર્ટ

Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech webસાઇટ

For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.

Note: Contact information for Unitech can typically be found on their official webસાઇટ અથવા ઉત્પાદન પેકેજિંગમાં.

સંબંધિત દસ્તાવેજો - MS840-SUBBGC-SG

પ્રિview યુનિટેક MS836B 2.4G વાયરલેસ લેસર બારકોડ સ્કેનર ક્વિક સ્ટાર્ટ ગાઇડ
યુનિટેક MS836B 2.4G વાયરલેસ લેસર બારકોડ સ્કેનર માટે ઝડપી શરૂઆત માર્ગદર્શિકા, સેટઅપ, ઓપરેશન મોડ્સ, કનેક્ટિવિટી અને મૂળભૂત સેટિંગ્સને આવરી લે છે.
પ્રિview યુનિટેક HT330 રગ્ડ હેન્ડહેલ્ડ ટર્મિનલ યુઝર મેન્યુઅલ
આ વપરાશકર્તા માર્ગદર્શિકા યુનિટેક HT330 રગ્ડ હેન્ડહેલ્ડ ટર્મિનલના સંચાલન, સેટઅપ અને જાળવણી માટે વ્યાપક સૂચનાઓ પ્રદાન કરે છે, જેમાં સ્પષ્ટીકરણો, સલામતી માર્ગદર્શિકા અને નિયમનકારી પાલન માહિતીનો સમાવેશ થાય છે.
પ્રિview યુનિટેક HT330 રગ્ડ હેન્ડહેલ્ડ ટર્મિનલ ક્વિક સ્ટાર્ટ ગાઇડ
યુનિટેક HT330 રગ્ડ હેન્ડહેલ્ડ ટર્મિનલ માટે વ્યાપક ઝડપી શરૂઆત માર્ગદર્શિકા, જેમાં ઉત્પાદન સુવિધાઓ, પેકેજ સામગ્રી, બેટરી અને સિમ/SD કાર્ડ ઇન્સ્ટોલેશન અને LED સ્થિતિ સૂચકાંકોની વિગતો આપવામાં આવી છે.
પ્રિview યુનિટેક EA600 રગ્ડ એન્ટરપ્રાઇઝ એન્ડ્રોઇડ મોબાઇલ કમ્પ્યુટર - સ્પષ્ટીકરણો અને સેવા
રિટેલ, લોજિસ્ટિક્સ અને સર્વિસ ઉદ્યોગો માટે રચાયેલ એક મજબૂત એન્ટરપ્રાઇઝ-ગ્રેડ એન્ડ્રોઇડ મોબાઇલ કમ્પ્યુટર, યુનિટેક EA600 ની વિગતવાર વિશિષ્ટતાઓ અને સુવિધાઓ. ટકાઉપણું, MDM ક્ષમતાઓ અને વોરંટી સેવા યોજનાઓ વિશેની માહિતી શામેલ છે.
પ્રિview યુનિટેક MS916 ક્વિક સ્ટાર્ટ ગાઇડ: કનેક્ટ કરો, પેર કરો અને તમારા સ્કેનરનો ઉપયોગ કરો
યુનિટેક MS916 વાયરલેસ બ્લૂટૂથ પોકેટ લેસર સ્કેનર સાથે ઝડપથી શરૂઆત કરો. આ માર્ગદર્શિકા કનેક્શન, ચાર્જિંગ, પીસી અને મોબાઇલ ઉપકરણો સાથે જોડી બનાવવા, પરીક્ષણ અને કાર્યક્ષમ કામગીરી માટે આવશ્યક ટિપ્સનો સમાવેશ કરે છે.
પ્રિview યુનિટેક MS838B 2.4G વાયરલેસ 2D બારકોડ સ્કેનર ક્વિક સ્ટાર્ટ ગાઇડ
યુનિટેક MS838B 2.4G વાયરલેસ 2D બારકોડ સ્કેનર માટે એક વ્યાપક ઝડપી શરૂઆત માર્ગદર્શિકા, જેમાં સેટઅપ, ગોઠવણી, ઓપરેશન મોડ્સ અને નિયમનકારી માહિતીની વિગતો આપવામાં આવી છે.