લીનિયર MCT-3 મેગાકોડ 3-ચેનલ રિમોટ કંટ્રોલ યુઝર મેન્યુઅલ

1. પરિચય

This manual provides instructions for the Linear MCT-3 Megacode 3-Channel Remote Control, model DNT00089. This remote is designed for use with Linear's Mega Code series of receivers, commonly found in garage door openers and automatic gate systems. It allows for the control of up to three separate devices.

The Linear MCT-3 remote transmits a unique code for each of its three buttons. This enables control of multiple devices, such as a garage door opener, an access gate, and an additional garage door operator, all from a single remote.

છબી 1.1: Comparison showing the Linear DNT00093 (left) and DNT00089 (right) remote controls. The DNT00093 is a replacement for the DNT00089, indicating functional equivalence.

2. ઉત્પાદન સુવિધાઓ

• Three-Channel Operation: Controls up to three separate Linear Mega Code compatible devices.
• Mega Code Technology: Utilizes secure, encrypted radio frequency transmission.
• Visor Clip Design: Easily attaches to a vehicle's sun visor for convenient access.
• કોમ્પેક્ટ અને ટકાઉ: Designed for everyday use.
• સરળ પ્રોગ્રામિંગ: Simple "Learn" button programming with compatible receivers.

છબી 2.1: આગળ view of the Linear MCT-3 Megacode 3-Channel Remote Control, showing its three distinct buttons.

3. સેટઅપ અને પ્રોગ્રામિંગ

To program your Linear MCT-3 remote control, follow these steps. Ensure you are near your garage door opener or gate receiver during this process.

1. Locate the Receiver's Learn Button: On your garage door opener or gate receiver, find the "Learn" button. The location of this button varies by model, but it is typically on the motor unit itself. Refer to your opener's manual if you cannot locate it.
2. લર્ન મોડ સક્રિય કરો: Press and release the "Learn" button on your receiver. The indicator light on the receiver will typically illuminate or flash, indicating it is in programming mode. You usually have about 30 seconds to complete the next step.
3. રિમોટ પ્રોગ્રામ કરો: While the receiver is in learn mode, press and hold the desired button on your Linear MCT-3 remote control that you wish to use for this device.
4. પ્રોગ્રામિંગની પુષ્ટિ કરો: Release the remote button once the receiver's indicator light changes (e.g., turns off, flashes rapidly, or the garage door/gate moves slightly). This confirms successful programming.
5. ટેસ્ટ ઓપરેશન: Press the programmed button on your remote control to ensure it activates the garage door or gate.

નોંધ: If you wish to program additional buttons on the remote for other devices, repeat steps 2-5 for each device, selecting a different button on the remote each time.

4. ઓપરેશન

Once programmed, operating your Linear MCT-3 remote control is straightforward:

• ઉપકરણ સક્રિય કરો: Press the corresponding button on the remote control that has been programmed to your garage door opener or gate.
• શ્રેણી: For optimal performance, ensure you are within a reasonable operating range of your receiver. Environmental factors can affect signal range.

5. Maintenance: Battery Replacement

The Linear MCT-3 remote control requires one 9V battery. If the remote's indicator light does not illuminate when a button is pressed, or if the range significantly decreases, the battery may need replacement.

1. રિમોટ સી ખોલોasing: Locate the battery compartment cover on the back of the remote. This may require a small screwdriver or prying tool to open carefully.
2. જૂની બેટરી કાઢી નાખો: Carefully remove the old 9V battery from its terminals.
3. નવી બેટરી દાખલ કરો: Insert a new 9V alkaline battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
4. સી બંધ કરોasing: બેટરી કમ્પાર્ટમેન્ટ કવર બદલો, ખાતરી કરો કે તે સુરક્ષિત રીતે બંધાયેલ છે.
5. ટેસ્ટ: Test the remote's operation with your programmed device.

નિકાલ: Please dispose of old batteries responsibly according to local regulations.

6. મુશ્કેલીનિવારણ

7. સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

For specific warranty information and technical support regarding your Linear MCT-3 Megacode 3-Channel Remote Control, please refer to the documentation provided with your purchase or contact Linear directly through their official webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.

વધુ સહાય માટે, તમે મુલાકાત લઈ શકો છો રેખીય webસાઇટ (દા.તamp(લે લિંક, વાસ્તવિક લિંક અલગ અલગ હોઈ શકે છે).