TeeJet XR11004VS એક્સટેન્ડેડ રેન્જ સ્પ્રે ટીપ યુઝર મેન્યુઅલ

પરિચય

The TeeJet XR11004VS Extended Range Spray Tip is designed for precision spraying in various applications, offering excellent spray distribution and reduced drift across a wide pressure range. This manual provides essential information for the proper setup, operation, and maintenance of your spray tip to ensure optimal performance and longevity.

ઉત્પાદન લક્ષણો

• Ideal for rigs equipped with sprayer controllers.
• Reduces drift at lower pressures, better coverage at higher pressures.
• Excellent spray distribution over a wide range of pressures.
• Present in 80 deg and 110 deg spray angles with VisiFlo color-coding.

ઉત્પાદન ઓવરview

સેટઅપ

1. સલામતી પ્રથમ: Always wear appropriate personal protective equipment (PPE) including gloves and eye protection when handling spray equipment and chemicals.
2. ઘટકો તપાસો: Before installation, ensure the spray tip, cap, and gasket are clean and free from damage.
3. ગાસ્કેટ ઇન્સ્ટોલ કરો: Place the appropriate gasket (e.g., EPDM, Viton) into the Quick TeeJet cap.
4. ટિપ દાખલ કરો: Carefully insert the XR11004VS spray tip into the cap, ensuring it is seated correctly.
5. Attach to Nozzle Body: Thread the Quick TeeJet cap onto the nozzle body of your sprayer. Hand-tighten until snug. Avoid over-tightening, which can damage the tip or cap.
6. ગોઠવણી ચકાસો: For automatic spray alignment, ensure you are using compatible Quick TeeJet caps and gaskets. Otherwise, manually align the spray pattern as desired.
7. લીક ચેક: After installation, fill the sprayer with water and pressurize to check for any leaks around the tip and cap.

ઓપરેટિંગ સૂચનાઓ

1. દબાણ શ્રેણી: The XR11004VS tip is designed to operate effectively across a pressure spectrum of 15 to 60 PSI (1–4 bar). Refer to the flow rate chart for specific application rates at different pressures.
2. Spray Height: Maintain the recommended spray height above the target to achieve uniform coverage and minimize drift. Consult application charts for optimal height based on nozzle spacing and spray angle.
3. મુસાફરીની ગતિ: Adjust your travel speed to achieve the desired application volume. Slower speeds increase application volume, while faster speeds decrease it.
4. પવનની સ્થિતિ: Avoid spraying in windy conditions to prevent drift and ensure accurate application. The extended range design helps reduce drift, but extreme wind should still be avoided.
5. રાસાયણિક સુસંગતતા: Ensure the spray tip material (stainless steel) is compatible with the chemicals being sprayed.

જાળવણી

1. નિયમિત સફાઈ: After each use, thoroughly rinse the spray tip with clean water to remove any chemical residues.
2. Unclogging: If the tip becomes clogged, remove it from the sprayer and clean it using a soft brush or a specialized nozzle cleaning tool. Do not use metal objects or wire, as this can damage the orifice and alter the spray pattern.
3. વસ્ત્રો માટે તપાસો: Periodically inspect the tip for signs of wear, such as a distorted spray pattern or increased flow rate at a given pressure. Worn tips should be replaced to maintain application accuracy.
4. ગાસ્કેટ રિપ્લેસમેન્ટ: Replace gaskets regularly, especially if they show signs of wear, cracking, or if leaks occur.
5. સંગ્રહ: Store spray tips in a clean, dry place away from direct sunlight and extreme temperatures.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

• મોડલ: XR11004VS
• સામગ્રી: સ્ટેનલેસ સ્ટીલ
• સ્પ્રે એંગલ: 110°
• Optimal Pressure Range: 15-60 PSI (1-4 બાર)
• પેકેજ પરિમાણો: 3.15 x 2.05 x 1.1 ઇંચ
• વસ્તુનું વજન: 1.6 ઔંસ
• ઉત્પાદક: છંટકાવ સિસ્ટમો
• Color-Coding: VisiFlo (Red)

વોરંટી અને આધાર

For information regarding product warranty, technical support, or replacement parts, please refer to the official TeeJet webસાઇટ પર જાઓ અથવા તમારા અધિકૃત ડીલરનો સંપર્ક કરો. વોરંટી દાવાઓ માટે તમારી ખરીદી રસીદ રાખો.