1. પરિચય
This instruction manual provides essential information for the safe and effective use of your VOLTCRAFT AM-60X46/30V/DC Panel Meter. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. સલામતી માહિતી
ચેતવણી: Electrical shock hazard. Improper use can result in injury or death. Always observe the following safety precautions:
- સ્થાપન અથવા જાળવણી પહેલાં વીજ પુરવઠો ડિસ્કનેક્ટ થયેલ છે તેની ખાતરી કરો.
- ફક્ત લાયક કર્મચારીઓએ જ ઇન્સ્ટોલેશન અને વાયરિંગ કરવું જોઈએ.
- ઉલ્લેખિત વોલ્યુમ કરતાં વધી જશો નહીંtage રેન્જ 30V DC.
- જો ઉપકરણ ક્ષતિગ્રસ્ત જણાય તો તેને ચલાવશો નહીં.
- ઉપકરણને સૂકું રાખો અને અતિશય તાપમાનથી દૂર રાખો.
3. ઉત્પાદન ઓવરview
The VOLTCRAFT AM-60X46/30V/DC is a compact analog panel meter designed for measuring DC voltage up to 30V. It features a clear, easy-to-read scale and a robust construction suitable for various applications.

આકૃતિ 1: આગળ view of the VOLTCRAFT AM-60X46/30V/DC Panel Meter. This image shows the meter's analog display with a scale from 0 to 30 volts, marked with 'V' for voltage, and the VOLTCRAFT logo. The needle is currently at 0V.
મુખ્ય લક્ષણો:
- Analog display for direct voltage રીડિંગ્સ.
- Measurement range: 0-30V DC.
- Compact dimensions (60 x 46 mm).
- ટકાઉ બાંધકામ.
4. સ્થાપન અને સેટઅપ
Follow these steps for proper installation of your panel meter:
- પાવર ડિસ્કનેક્શન: Ensure all power to the circuit where the meter will be installed is completely disconnected.
- પેનલ કટઆઉટ: Create an appropriate cutout in your panel for the meter. Refer to the specifications section for exact dimensions (typically 60 x 46 mm).
- માઉન્ટ કરવાનું: Insert the meter into the cutout from the front. Secure it from the rear using the provided mounting hardware (if applicable).
- વાયરિંગ: Connect the meter to the DC voltage source you wish to measure. Observe correct polarity: connect the positive (+) terminal of the meter to the positive side of the circuit, and the negative (-) terminal to the negative side. Incorrect polarity may damage the meter.
- ચકાસણી: Double-check all connections for security and correct polarity before restoring power.
5. ઓપરેટિંગ સૂચનાઓ
Once installed and wired correctly, the VOLTCRAFT AM-60X46/30V/DC Panel Meter operates automatically:
- પાવર ચાલુ: Restore power to the circuit. The meter's needle will move to indicate the measured DC voltage.
- ડિસ્પ્લે વાંચવું: ભાગ વાંચોtage value directly from the scale indicated by the needle. The scale ranges from 0 to 30V.
- શૂન્ય ગોઠવણ: If the needle does not rest precisely on zero when no voltage is applied, use the small screw located at the bottom center of the meter face to carefully adjust it. This adjustment should only be performed when the meter is disconnected from any voltage સ્ત્રોત.
6. જાળવણી
The VOLTCRAFT AM-60X46/30V/DC Panel Meter requires minimal maintenance:
- સફાઈ: Clean the meter's front panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- નિરીક્ષણ: Periodically inspect the wiring connections to ensure they are secure and free from corrosion.
- સંગ્રહ: If storing the meter, keep it in a dry, dust-free environment within its specified operating temperature range.
7. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Meter needle does not move. | No power to the circuit; incorrect wiring; damaged meter. | Check power supply; verify wiring polarity and connections; replace meter if damaged. |
| Meter shows incorrect reading. | Incorrect wiring; meter not calibrated (rarely needed for analog meters); external interference. | Verify wiring; perform zero adjustment if needle is off at 0V; ensure no strong magnetic fields are nearby. |
| Needle is stuck or erratic. | Physical damage; internal fault. | Inspect for physical damage; if internal fault is suspected, replace the meter. |
8. સ્પષ્ટીકરણો
- બ્રાન્ડ: વOLલ્ટ્રાફ્ટ
- મોડલ નંબર: AM-60X46/30V/DC
- માપન પ્રકાર: ડીસી વોલ્યુમtage
- માપન શ્રેણી: 0 - 30 V/DC
- પરિમાણો: 60 x 46 mm (approximate panel cutout size)
- વજન: 44 ગ્રામ
- પાવર સ્ત્રોત: Manual operation (passive measurement)
- ASIN: B00CS2GZ5C
9. વોરંટી અને સપોર્ટ
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact VOLTCRAFT customer service directly. Keep your purchase receipt as proof of purchase.
Spare parts availability: 1 Year (as per product information).





