Supermicro X10SLM+-LN4F Motherboard User Manual

1. પરિચય

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Supermicro X10SLM+-LN4F motherboard. Designed for server applications, this motherboard features an LGA1150 socket, Intel C224 PCH, DDR3 memory support, and multiple Gigabit Ethernet ports. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

2. ઉત્પાદન ઓવરview

The Supermicro X10SLM+-LN4F is a microATX server motherboard built for reliability and performance. Key features include:

• LGA1150 Socket for Intel Xeon E3-1200 v3/v4 and 4th Gen Core i3 processors.
• Intel C224 PCH chipset.
• Four DDR3 DIMM slots supporting up to 64GB ECC/non-ECC UDIMM.
• Multiple SATA3 (6Gbps) ports.
• Integrated quad Gigabit Ethernet ports.
• USB 3.0 and USB 2.0 support.
• VGA output for integrated graphics.

આકૃતિ 2.1: ટોપ-ડાઉન view of the Supermicro X10SLM+-LN4F motherboard, showing the CPU socket, DIMM slots, PCIe slots, and various connectors.

આકૃતિ 2.2: કોણીય view of the motherboard, highlighting the layout of components and expansion slots.

આકૃતિ 2.3: Rear I/O panel of the Supermicro X10SLM+-LN4F motherboard, featuring multiple LAN ports, USB ports, and serial ports.

3. સેટઅપ અને ઇન્સ્ટોલેશન

Before beginning installation, ensure your system is powered off and disconnected from the power source. Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

૫.૨. સીપીયુ ઇન્સ્ટોલેશન

1. મધરબોર્ડ પર LGA1150 CPU સોકેટ શોધો.
2. લોડ લીવરને હળવેથી નીચે દબાવો અને CPU સોકેટ રીટેન્શન ફ્રેમ ખોલવા માટે તેને બાજુ પર ખેંચો.
3. CPU પરના ત્રિકોણાકાર ચિહ્નને સોકેટ પરના સંબંધિત ચિહ્ન સાથે કાળજીપૂર્વક ગોઠવો.
4. CPU ને દબાણ કર્યા વિના સોકેટમાં મૂકો.
5. Close the retention frame and secure it with the load lever.
6. CPU ના ઇન્ટિગ્રેટેડ હીટ સ્પ્રેડર (IHS) પર થર્મલ પેસ્ટનો પાતળો, સમાન સ્તર લગાવો.
7. ઉત્પાદકની સૂચનાઓ અનુસાર CPU કુલર ઇન્સ્ટોલ કરો.

૩. મેમરી (RAM) ઇન્સ્ટોલેશન

1. Locate the four DDR3 DIMM slots. For optimal performance, refer to the motherboard's specific memory population guidelines, typically starting with slots closest to the CPU or specific colored slots for dual-channel configurations.
2. Open the retention clips at both ends of the DIMM slot.
3. DDR3 મેમરી મોડ્યુલ પરના નોચને DIMM સ્લોટમાં રહેલી કી સાથે સંરેખિત કરો.
4. Insert the memory module firmly into the slot until the retention clips snap into place.
5. Ensure both clips are fully closed and the module is seated correctly.

3.3. સ્ટોરેજ ડિવાઇસ ઇન્સ્ટોલેશન

Connect SATA storage devices (HDDs/SSDs) to the SATA ports on the motherboard using SATA data cables. Connect the power cables from your power supply unit (PSU) to the storage devices.

3.4. વિસ્તરણ કાર્ડ ઇન્સ્ટોલેશન

This motherboard features PCI Express (PCIe) slots. To install an expansion card:

1. Remove the corresponding slot cover from your chassis.
2. વિસ્તરણ કાર્ડને PCIe સ્લોટ સાથે સંરેખિત કરો.
3. કાર્ડ સ્લોટમાં સંપૂર્ણપણે બેસી જાય ત્યાં સુધી મજબૂતીથી દબાવો.
4. Secure the card with a screw or retention clip from your chassis.

3.5. પાવર જોડાણો

• 24-પિન ATX પાવર કનેક્ટર: Connect the main 24-pin power cable from your PSU to the ATX power connector on the motherboard.
• 8-pin EPS/CPU Power Connector: Connect the 8-pin (or 4+4 pin) CPU power cable from your PSU to the EPS connector near the CPU socket.

૨.૭. ફ્રન્ટ પેનલ અને રીઅર I/O કનેક્શન્સ

• ફ્રન્ટ પેનલ કનેક્ટર્સ: Connect the power switch, reset switch, power LED, and HDD activity LED cables from your chassis to the corresponding pins on the motherboard's front panel header. Refer to the motherboard's silkscreen labels for correct orientation.
• યુએસબી હેડર્સ: Connect front panel USB ports to the onboard USB headers.
• ઑડિઓ હેડર્સ: Connect front panel audio jacks to the onboard audio header.
• રીઅર I/O પેનલ: Connect peripherals such as keyboard, mouse, monitor (via VGA), and network cables (to the Gigabit Ethernet ports) to the rear I/O panel.

4. ઓપરેટિંગ સૂચનાઓ

4.1. Initial Power On and BIOS/UEFI Setup

1. After all components are installed and connected, connect the power cord to the PSU and turn on the power switch on the PSU.
2. તમારા ચેસિસ પર પાવર બટન દબાવો.
3. During the Power-On Self-Test (POST), repeatedly press the DEL or F2 key (or as indicated on screen) to enter the BIOS/UEFI setup utility.
4. In the BIOS/UEFI, configure essential settings such as date and time, boot order, and enable/disable specific features as required for your operating system and hardware.
5. ફેરફારો સાચવો અને BIOS/UEFI માંથી બહાર નીકળો. સિસ્ટમ ફરીથી શરૂ થશે.

4.2. ઓપરેટિંગ સિસ્ટમ ઇન્સ્ટોલેશન

To install an operating system (e.g., Windows, Linux, VMware ESXi):

1. Insert the operating system installation media (USB drive or DVD) into the system.
2. Boot from the installation media (you may need to adjust the boot order in BIOS/UEFI).
3. Follow the on-screen prompts to install the operating system on your chosen storage device.
4. After installation, install all necessary drivers for the motherboard components (chipset, LAN, VGA, etc.) from the Supermicro website or the provided driver disc.

5. જાળવણી

નિયમિત જાળવણી તમારા મધરબોર્ડ અને સિસ્ટમના લાંબા સમય સુધી અને સ્થિર સંચાલનને સુનિશ્ચિત કરવામાં મદદ કરે છે.

5.1. સફાઈ

• Periodically clean dust from the motherboard and system components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• ઘટકો પર સીધા પ્રવાહી ક્લીનર્સનો ઉપયોગ કરવાનું ટાળો.
• Ensure proper airflow within the chassis by keeping fan vents clear.

5.2. Firmware and Driver Updates

• સુપરમાઈક્રો તપાસો website periodically for updated BIOS/UEFI firmware and drivers for your motherboard model.
• Follow the provided instructions carefully when updating firmware to avoid system instability.

5.3. પર્યાવરણીય વિચારણાઓ

• Operate the motherboard within recommended temperature and humidity ranges to prevent damage.
• Ensure adequate ventilation in the server chassis.

6. મુશ્કેલીનિવારણ

આ વિભાગ તમને આવી શકે તેવી સામાન્ય સમસ્યાઓના ઉકેલો પૂરા પાડે છે.

૬.૧. પાવર નહીં / પોસ્ટ નહીં (પાવર-ઓન સ્વ-પરીક્ષણ)

• Verify that the power supply unit (PSU) is connected correctly to the motherboard (24-pin ATX and 8-pin EPS connectors).
• Ensure the PSU is switched on and receiving power from the wall outlet.
• Check that the front panel power switch cable is correctly connected to the motherboard header.
• Reseat the CPU, RAM modules, and any expansion cards.
• Try booting with only essential components (CPU, one RAM stick, CPU cooler) to isolate the issue.
• Listen for beep codes from the system speaker, which can indicate specific hardware failures. Refer to the Supermicro website for beep code interpretations.

6.2. ડિસ્પ્લે સમસ્યાઓ

• Ensure the monitor is properly connected to the motherboard's VGA port.
• ખાતરી કરો કે મોનિટર ચાલુ છે અને સાચા ઇનપુટ સ્ત્રોત પર સેટ છે.
• If using a discrete graphics card, ensure it is properly seated and connected to power (if required).

૬.૩. ઓપરેટિંગ સિસ્ટમ બુટ થતી નથી

• Check the boot order in the BIOS/UEFI to ensure the correct storage device is prioritized.
• Verify that the operating system is installed correctly on the storage device.
• Ensure SATA data and power cables are securely connected to the storage device and motherboard.

7. સ્પષ્ટીકરણો

Below are the technical specifications for the Supermicro X10SLM+-LN4F motherboard:

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Supermicro product page.

8. વોરંટી અને સપોર્ટ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Supermicro website. Technical support is available through Supermicro's customer service channels, including their support portal, email, and phone. Please have your product model number (X10SLM+-LN4F) and serial number ready when contacting support.

For the latest drivers, BIOS updates, and additional documentation, please visit: www.supermicro.com