પ્રમેક પીએક્સ 8000 સિરીઝ ગેસોલિન જનરેટર વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your Pramac PX 8000 Series Gasoline Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

2. સલામતી માહિતી

Operating a generator can be hazardous if proper safety precautions are not followed. Always adhere to these guidelines:

• કાર્બન મોનોક્સાઇડ સંકટ: Never operate the generator indoors or in enclosed spaces. Generators produce carbon monoxide, a colorless, odorless, and deadly gas. Operate only in well-ventilated outdoor areas, far from windows, doors, and vents.
• આગનું જોખમ: Gasoline is highly flammable. Refuel only when the engine is off and cool. Do not smoke or use open flames near the generator. Store fuel in approved containers in a well-ventilated area.
• વિદ્યુત આંચકો સંકટ: Do not operate the generator in wet conditions. Ensure all electrical connections are secure and dry. Never connect the generator directly to your home's electrical system without a proper transfer switch installed by a qualified electrician. This can cause backfeed, which is dangerous for utility workers.
• ગરમ સપાટીઓ: The generator's engine and muffler become very hot during operation. Avoid contact with these surfaces to prevent burns. Allow the generator to cool before handling or servicing.
• ફરતા ભાગો: Keep hands, feet, and clothing away from moving parts such as the fan and flywheel.
• બાળકો અને પાળતુ પ્રાણી: બાળકો અને પાલતુ પ્રાણીઓને હંમેશા જનરેટરથી દૂર રાખો.
• પર્સનલ પ્રોટેક્ટિવ ઇક્વિપમેન્ટ (PPE): Wear appropriate PPE, such as gloves and eye protection, when handling fuel or performing maintenance.

3. ઉત્પાદન ઓવરview

The Pramac PX 8000 Series is a robust gasoline-powered generator designed for reliable power supply. It features a Pramac OHV engine, Automatic Voltage Regulation (AVR) for stable power output, and both electric and manual starting options. The unit is built with a durable tubular steel frame and includes integrated wheels and a foldable transport handle for enhanced portability.

આકૃતિ 3.1: આગળની બાજુ view of the Pramac PX 8000 generator, showing the control panel, outlets, engine, and one of the integrated wheels.

આકૃતિ 3.2: બાજુ view of the Pramac PX 8000 generator, highlighting the robust frame and integrated wheel for easy transport.

આકૃતિ 3.3: ફ્રન્ટ view of the Pramac PX 8000 generator, detailing the control panel with various outlets: one Schuko socket, one CE 16A 230V socket, and one CE 32A 230V socket.

આકૃતિ 3.4: પાછળ view of the Pramac PX 8000 generator, showing the engine exhaust and general structural components from the back.

મુખ્ય લક્ષણો:

• Single-phase continuous power: 5.0 kVA (4.5 kW) at 230 V
• Pramac OHV Gasoline Engine
• સ્વચાલિત વોલ્યુમtagઇ નિયમન (AVR)
• Electric and Manual Start Options
• 25-liter Fuel Tank Capacity
• Socket Panel: 1 Schuko, 1 x CE 16 A 230 V, 1 x CE 32 A 230 V
• Tubular Steel Frame with Integrated Wheels
• Foldable Transport Handle

4. સેટઅપ

Before first use, ensure the generator is properly assembled and prepared.

1. અનપેકીંગ: Carefully remove the generator and all components from the packaging. Inspect for any shipping damage.
2. વ્હીલ્સ અને હેન્ડલ જોડો: The generator comes with an integrated wheel set and a foldable transport handle. Follow the instructions in the included short user manual for proper attachment and deployment of these components. Ensure all bolts are securely tightened.
3. એન્જિન તેલ ઉમેરો: The engine is shipped without oil. Locate the oil fill cap/dipstick. Add the recommended type and amount of engine oil (refer to the engine's specific manual or the generator's quick start guide for oil specifications, typically SAE 10W-30). Do not overfill.
4. બળતણ ઉમેરો: Ensure the generator is on a level surface and the engine is off and cool. Open the fuel cap and carefully fill the 25-liter fuel tank with fresh, unleaded gasoline. Do not fill above the fuel filter screen or the maximum fill line. Wipe up any spills immediately.
5. સ્થિતિ: Place the generator on a firm, level surface outdoors, away from any combustible materials, buildings, or vents. Ensure adequate clearance for ventilation.

5. ઓપરેટિંગ સૂચનાઓ

5.1. Pre-Start Checks

• એન્જિન ઓઇલનું સ્તર તપાસો.
• બળતણ સ્તર તપાસો.
• Ensure all electrical loads are disconnected from the generator outlets.
• Verify the generator is on a stable, level surface in a well-ventilated outdoor area.

5.2. Starting the Generator (Electric Start)

1. ઇંધણ વાલ્વને "ચાલુ" સ્થિતિમાં ફેરવો.
2. Set the engine switch to the "ON" or "RUN" position.
3. If the engine is cold, apply choke as needed.
4. Press and hold the electric start button until the engine starts. Release the button immediately once the engine runs.
5. Once the engine is running smoothly, gradually open the choke (if used).

5.3. Starting the Generator (Manual Start)

1. ઇંધણ વાલ્વને "ચાલુ" સ્થિતિમાં ફેરવો.
2. Set the engine switch to the "ON" or "RUN" position.
3. If the engine is cold, apply choke as needed.
4. Grasp the recoil starter handle firmly and pull it slowly until you feel resistance, then pull quickly and smoothly to start the engine. Do not let the rope snap back.
5. Repeat if necessary until the engine starts.
6. Once the engine is running smoothly, gradually open the choke (if used).

5.4. ઇલેક્ટ્રિકલ લોડ્સને કનેક્ટ કરવું

એકવાર જનરેટર ચાલુ થઈ જાય અને સ્થિર થઈ જાય, પછી તમે તમારા વિદ્યુત ઉપકરણોને કનેક્ટ કરી શકો છો. હંમેશા કુલ વોટની ખાતરી કરોtagકનેક્ટેડ ડિવાઇસનો e જનરેટરના રેટેડ આઉટપુટ કરતાં વધુ નથી.

• Plug appliances directly into the generator's outlets or use heavy-duty, outdoor-rated extension cords.
• Connect devices one at a time, starting with the largest load.
• Monitor the generator's performance. If the engine struggles or the circuit breaker trips, reduce the load.

૬.૫. જનરેટર બંધ કરવું

1. જનરેટરમાંથી તમામ વિદ્યુત લોડને ડિસ્કનેક્ટ કરો.
2. જનરેટરને ઠંડુ થવા માટે લોડ કર્યા વિના થોડી મિનિટો સુધી ચાલવા દો.
3. એન્જિન સ્વીચને "બંધ" સ્થિતિમાં ફેરવો.
4. ઇંધણ વાલ્વને "બંધ" સ્થિતિમાં ફેરવો.

6. જાળવણી

Regular maintenance ensures the longevity and reliable operation of your generator. Always perform maintenance when the engine is off and cool.

• એન્જિન તેલ: Check oil level before each use. Change oil after the first 20 hours of operation, then every 50-100 hours or annually, whichever comes first.
• એર ફિલ્ટર: Inspect the air filter regularly (every 50 hours or more often in dusty conditions). Clean or replace as necessary. A dirty air filter can reduce engine performance and increase fuel consumption.
• સ્પાર્ક પ્લગ: Inspect the spark plug every 100 hours or annually. Clean or replace if fouled or worn. Ensure proper gap.
• બળતણ ફિલ્ટર: Check and clean or replace the fuel filter periodically to prevent fuel system blockages.
• સામાન્ય સફાઈ: Keep the generator clean and free of debris. Use a dry cloth or soft brush to remove dirt. Do not use water to clean the engine or electrical components.
• સંગ્રહ: For extended storage, drain the fuel tank and carburetor, or use a fuel stabilizer. Remove the spark plug and add a small amount of engine oil into the cylinder, then pull the recoil starter a few times to distribute the oil. Store in a dry, protected area.

7. મુશ્કેલીનિવારણ

આ વિભાગ તમારા જનરેટરમાં આવતી સામાન્ય સમસ્યાઓનું નિરાકરણ લાવે છે.

If problems persist after attempting these solutions, please contact a qualified service technician.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Pramac website. For technical support, spare parts, or service inquiries, please contact your authorized Pramac dealer or the manufacturer's customer service department.

Note: Specific contact details and warranty terms may vary by region and purchase location.