1. પરિચય
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo Dm10 1Hp Electric Pump. Please read this manual thoroughly before using the pump and retain it for future reference.
The Pedrollo Dm10 electric pump is designed for draining clear or slightly dirty water. It is suitable for domestic, civil, and professional applications, including dewatering flooded areas such as basements, garages, and for emptying swimming pools or bathtubs. This pump is also effective for the disposal of non-corrosive wastewater. Its reliability is a key feature, especially in fixed installations with automatic operation.
Key features include a flow rate of up to 300 liters/minute (18 m³/h), a head of up to 16 meters, and a 0.75 kW (1 HP) motor. It comes with a 5-meter cable and a Schuko plug.
2. સલામતી માહિતી
Always observe the following safety precautions to prevent personal injury and damage to the pump:
- ઇલેક્ટ્રિકલ સલામતી: ખાતરી કરો કે પાવર સપ્લાય પંપના વોલ્યુમ સાથે મેળ ખાય છેtage (220-240V AC). Always connect the pump to a properly grounded outlet. Do not operate the pump with damaged cables or plugs. Never touch the pump or its electrical connections with wet hands.
- પાણીની ગુણવત્તા: This pump is designed for clear or slightly dirty water. Do not use it for flammable, corrosive, explosive, or chemically aggressive liquids.
- ડૂબકી: The pump must be fully submerged during operation to ensure proper cooling. Operating the pump dry will cause severe damage.
- બાળકો અને પાળતુ પ્રાણી: Keep children and pets away from the pump and the area of operation.
- જાળવણી: Always disconnect the pump from the power supply before performing any maintenance, cleaning, or inspection.
- ઇન્સ્ટોલેશન: Ensure the pump is placed on a stable, level surface. Do not suspend the pump by its power cable.
3. ઉત્પાદન ઓવરview
The Pedrollo Dm10 is a robust electric submersible pump designed for efficient water transfer and drainage. It features a durable construction and an integrated float switch for automatic operation.
આકૃતિ 1: Pedrollo Dm10 1Hp Electric Pump. This image shows the pump's silver body, blue base, orange handle, and power cable with a float switch, indicating its compact and functional design.
મુખ્ય ઘટકો:
- પંપ બોડી: Houses the motor and impeller.
- Base/Inlet Grille: Allows water entry and filters out larger debris.
- ડિસ્ચાર્જ આઉટલેટ: Connects to the discharge hose.
- ફ્લોટ સ્વિચ: પાણીના સ્તરના આધારે પંપ આપમેળે ચાલુ/બંધ થાય છે.
- પાવર વાયર: Connects the pump to the electrical supply.
- હેન્ડલ: For easy transport and positioning.
4. સેટઅપ
- અનપેકીંગ: Carefully remove the pump from its packaging. Inspect for any signs of damage during transit.
- પ્લેસમેન્ટ: Position the pump on a stable, flat surface in the area to be drained. Ensure the pump is fully submerged in water during operation. The float switch must have sufficient space to move freely to activate and deactivate the pump.
- ડિસ્ચાર્જ હોસ કનેક્શન: Connect a suitable discharge hose to the pump's outlet. Ensure the connection is secure to prevent leaks. The hose should be routed to a safe drainage point, away from the area being dewatered.
- ઇલેક્ટ્રિકલ કનેક્શન: Connect the pump's 5-meter power cable with the Schuko plug to a grounded 220-240V AC electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for added safety.
- Float Switch Adjustment: Adjust the position of the float switch cable to set the desired ON/OFF water levels. The pump will start when the float rises to a horizontal position and stop when it drops below a certain level.
5. ઓપરેટિંગ સૂચનાઓ
સ્વચાલિત કામગીરી:
The Pedrollo Dm10 pump is equipped with an integrated float switch for automatic operation. Once connected to power and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will then pump water until the level drops sufficiently for the float switch to fall, turning the pump off.
- Ensure the float switch is free to move and not obstructed by walls or debris.
- Verify that the discharge hose is clear and properly routed.
- Plug the pump into a suitable electrical outlet. The pump will activate when the water level reaches the set 'ON' point of the float switch.
- The pump will stop automatically when the water level drops to the set 'OFF' point.
Manual Operation (if applicable):
While primarily designed for automatic use, some models may allow for manual override by securing the float switch in an 'ON' position. However, this requires constant supervision to prevent dry running and pump damage. Always refer to specific model instructions for manual operation.
6. જાળવણી
Regular maintenance ensures the longevity and optimal performance of your pump. Always disconnect the pump from the power supply before any maintenance.
- Cleaning the Inlet Grille: Periodically inspect and clean the inlet grille at the base of the pump to remove any debris (leaves, small stones, etc.) that may obstruct water flow.
- ઇમ્પેલર નિરીક્ષણ: If the pump's performance decreases, the impeller might be clogged. Disconnect power, remove the base plate (if accessible), and carefully clear any obstructions from the impeller.
- કેબલ અને પ્લગ નિરીક્ષણ: Regularly check the power cable and plug for any signs of damage, cuts, or fraying. Replace immediately if damage is found.
- સંગ્રહ: If the pump will not be used for an extended period, clean it thoroughly, drain all water, and store it in a dry, frost-free location.
7. મુશ્કેલીનિવારણ
તકનીકી સપોર્ટનો સંપર્ક કરતા પહેલા, પુનઃview નીચેના સામાન્ય મુદ્દાઓ અને ઉકેલો:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| પંપ ચાલુ થતો નથી. |
|
|
| Pump runs but no water is discharged or flow is low. |
|
|
| પંપ અણધારી રીતે બંધ થઈ જાય છે. |
|
|
If problems persist after following these steps, please contact qualified service personnel.
8. સ્પષ્ટીકરણો
| ઉત્પાદક | પેડ્રોલો |
| મોડલ સંદર્ભ | Dm 10 5MT |
| શક્તિ | 0.75 kW (1 HP) |
| ભાગtage | ૧૨૦-૨૭૭ વોલ્ટ (એસી) |
| મહત્તમ પ્રવાહ દર | 300 Liters per minute (18 m³/h) |
| મેક્સ હેડ | 16 મીટર |
| કેબલ લંબાઈ | 5 મીટર |
| પાવર સ્ત્રોત | ઇલેક્ટ્રિક કેબલ |
| વસ્તુનું વજન | 10 કિલોગ્રામ |
9. વોરંટી અને સપોર્ટ
Specific warranty details are typically provided at the point of purchase or within separate documentation accompanying the product. Please refer to your purchase receipt or contact the retailer for warranty information.
For technical support, spare parts, or service inquiries, please contact your authorized Pedrollo dealer or the customer service department of your retailer. When contacting support, please have your pump's model number (Dm 10 5MT) and purchase date available.
