1. ઉત્પાદન ઓવરview
The Metabo HWW 4000/25 G is a domestic water pump system designed for automatic water supply, garden irrigation, groundwater pumping, and the transfer, pumping, and circulation of clear water from pressure tanks. It features an energy-efficient and low-noise operation, equipped with a pressure switch on the boiler for automatic activation to meet higher water demands. The system includes a maintenance-free capacitor motor and overload protection to prevent overheating. A high-quality mechanical sealing system ensures a long service life. For user convenience, it has a separate water filling opening for easy pump startup and a tool-free water drain plug to protect against frost damage. This system is suitable for garden irrigation with 1 to 3 sprinklers and operates on single-phase power.
2. સલામતી સૂચનાઓ
આ ઉત્પાદન ચલાવતા પહેલા હંમેશા બધી સલામતી ચેતવણીઓ અને સૂચનાઓ વાંચો અને સમજો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ઇલેક્ટ્રિક શોક, આગ અને/અથવા ગંભીર ઈજાનું કારણ બની શકે છે.
- ખાતરી કરો કે પાવર સપ્લાય વોલ્યુમ સાથે મેળ ખાય છેtage specified on the pump's rating plate.
- ક્ષતિગ્રસ્ત કેબલ અથવા પ્લગથી પંપ ચલાવશો નહીં.
- Protect the pump from frost. Drain water completely if storing in freezing temperatures.
- Do not pump flammable, explosive, or corrosive liquids.
- બાળકો અને અનધિકૃત વ્યક્તિઓને કાર્યક્ષેત્રથી દૂર રાખો.
- કોઈપણ જાળવણી અથવા સફાઈ કરતા પહેલા હંમેશા વીજ પુરવઠો ડિસ્કનેક્ટ કરો.
3. સેટઅપ
3.1 અનપેકિંગ
Carefully remove all components from the packaging. Inspect for any damage that may have occurred during transit. Retain packaging for future storage or transport.
3.2 પ્લેસમેન્ટ
Place the pump on a firm, level surface in a dry, well-ventilated area, protected from direct sunlight and frost. Ensure sufficient space around the pump for ventilation and maintenance.
3.3 વિદ્યુત જોડાણ
Connect the pump to a properly grounded electrical outlet. Ensure the electrical circuit is protected by a residual current device (RCD) with a tripping current of no more than 30 mA.
૫.૬ પાણીના જોડાણો
Connect the suction line to the pump's inlet and the pressure line to the outlet. Use appropriate fittings and sealants to ensure watertight connections. For optimal performance, the suction line should be as short and straight as possible, and its diameter should not be smaller than the pump's inlet diameter. Install a non-return valve on the suction line to prevent water from flowing back.
3.5 પંપ પ્રિમિંગ
Before initial start-up, the pump must be completely filled with water through the separate water filling opening until no more air escapes. This ensures proper suction and prevents dry running. Close the filling opening securely after priming.
4. ઓપરેટિંગ સૂચનાઓ
4.1 પ્રારંભિક સ્ટાર્ટ-અપ
After priming the pump and ensuring all connections are secure, plug the pump into the electrical outlet. The pump will start automatically when water is drawn and the pressure in the system drops below the set activation pressure.
4.2 સ્વચાલિત કામગીરી
The integrated pressure switch monitors the system pressure. When water is consumed (e.g., opening a tap), the pressure drops, and the pump automatically switches on. Once the water consumption stops and the system pressure reaches the maximum set value, the pump switches off. This automatic function ensures an efficient and convenient water supply.
4.3 શટ ડાઉન
To temporarily shut down the pump, simply close all water outlets. The pump will switch off automatically. For extended periods of non-use or maintenance, disconnect the pump from the power supply.
5. જાળવણી
5.1 નિયમિત તપાસ
Periodically check all connections for leaks. Ensure the suction line is free from blockages and the non-return valve is functioning correctly. Inspect the power cable for any signs of damage.
5.2 સફાઈ
Clean the exterior of the pump with a damp cloth. Do not use harsh detergents or solvents. Ensure the motor's cooling fins are free from dust and debris to prevent overheating.
5.3 વિન્ટર સ્ટોરેજ
If the pump is to be stored in an area where temperatures may drop below freezing, it is crucial to completely drain all water from the pump and connected lines. Use the tool-free water drain plug for this purpose. Store the pump in a dry, frost-free location.
6. મુશ્કેલીનિવારણ
ગ્રાહક સપોર્ટનો સંપર્ક કરતા પહેલા, કૃપા કરીને નીચેની મુશ્કેલીનિવારણ માર્ગદર્શિકાનો સંદર્ભ લો:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| પંપ ચાલુ થતો નથી | No power supply; Overload protection activated; Motor fault | Check power connection and circuit breaker; Allow motor to cool down; Contact service technician |
| પંપ ચાલે છે પણ પાણી પહોંચાડાતું નથી | Pump not primed; Suction line blocked or leaking; Water source empty | Prime the pump; Check suction line for leaks or blockages; Ensure water source has sufficient water |
| Low pressure or flow rate | Partial blockage in suction/pressure line; Air in the system; Worn pump components | Check lines for blockages; Re-prime the pump; Contact service technician for inspection |
| Pump switches on and off frequently | Leak in the system; Pressure tank pre-charge pressure incorrect; Non-return valve faulty | Check entire system for leaks; Adjust pressure tank pre-charge; Inspect/replace non-return valve |
7. ટેકનિકલ વિશિષ્ટતાઓ
| સ્પષ્ટીકરણ | મૂલ્ય |
|---|---|
| ઉત્પાદક | મેટાબો |
| સંદર્ભ નંબર | 600971000 |
| રંગ | લીલા |
| શૈલી | ઘરેલું |
| સામગ્રી | ધાતુ |
| પાવર સ્ત્રોત | ઇલેક્ટ્રિક કેબલ |
| ભાગtage | 240 વોલ્ટ |
| રેટેડ ઇનપુટ પાવર | 1100 વોટ |
| વસ્તુઓનો જથ્થો | 1 |
| ટુકડાઓની સંખ્યા | 1 |
| મહત્તમ પ્રવાહ દર | ૧.૫ લિટર પ્રતિ કલાક |
| Maximum Delivery Head | 46 મીટર |
| સમાવાયેલ ઘટકો | METABO 600971000 - Domestic Water Pump HWW 4000/25 G 1100W max. pumping height 46 m |
| બેટરી સમાવાયેલ | ના |
| બેટરી જરૂરી છે | ના |
| વજન | 17.2 કિલોગ્રામ |
| વ્યાસ | 1 પિકોમીટર |
| સ્પેર પાર્ટ્સની ઉપલબ્ધતા | 1 વર્ષ |
| ઉત્પાદનના પરિમાણો (L x W x H) | 62.6 x 52 x 28.78 સેમી |
| આઇટમ મોડલ નંબર | 600971000 |
| મૂળ દેશ | ચીન |
8. વોરંટી અને સપોર્ટ
Metabo products are manufactured to high-quality standards and undergo strict quality control. This product comes with a standard manufacturer's warranty, typically covering defects in materials and workmanship for a period specified at the time of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, spare parts, or warranty service, please contact your authorized Metabo dealer or visit the official Metabo website for local service centers. When contacting support, please have your model number (HWW 4000/25 G) and serial number (if applicable) ready.
- Supportનલાઇન સપોર્ટ: મુલાકાત www.metabo.com
- ગ્રાહક સેવા: Refer to your product packaging or the Metabo webપ્રાદેશિક સંપર્ક માહિતી માટેની સાઇટ.
