ઉત્પાદન ઓવરview
The Oregon Scientific BAR218HG WeatheratHome Wireless Weather Station provides comprehensive local weather monitoring with Bluetooth connectivity. It displays indoor and outdoor temperature and humidity, a 12-24 hour weather forecast, and moon phase. The device also features weather alerts for conditions like heat, fog, frost, rain, and wind storms. Its clock function automatically syncs with your smartphone for accurate timekeeping, including daylight saving adjustments. The accompanying mobile application allows for monitoring of up to 5 locations, viewing 7-day history, and data logging.
આકૃતિ 1: ફ્રન્ટ view of the Oregon Scientific BAR218HG Weather Station, showing its main display with outdoor and indoor readings, weather forecast, and control buttons.
પેકેજ સામગ્રી
- BAR218HG Main Unit
- One THGN132N Wireless Outdoor Temperature/Humidity Sensor
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
- Batteries (not included, requires 4 AA batteries for main unit, 2 AAA batteries for sensor - typical)
સેટઅપ
1. બેટરી ઇન્સ્ટોલેશન
- મુખ્ય યુનિટની પાછળના ભાગમાં બેટરી કમ્પાર્ટમેન્ટ કવર ખોલો.
- યોગ્ય ધ્રુવીયતા (+ અને -) અવલોકન કરીને, 4 AA બેટરી દાખલ કરો.
- બેટરી કમ્પાર્ટમેન્ટ કવર બંધ કરો.
- For the THGN132N sensor, open its battery compartment and insert 2 AAA batteries, observing polarity.
- Close the sensor's battery compartment.
2. સેન્સર પ્લેસમેન્ટ
Place the THGN132N wireless sensor outdoors in a shaded area, away from direct sunlight and heat sources, to ensure accurate temperature and humidity readings. The transmission range is up to 150 feet (45 meters) from the main unit.
૩.૩. પ્રારંભિક સુમેળ
Upon battery installation, the main unit will automatically search for the outdoor sensor. Ensure the sensor is within range. The outdoor temperature and humidity should appear on the main unit's display within a few minutes.
4. App Connection (Bluetooth)
- Download the "Weather@Home" app from your smartphone's app store.
- તમારા સ્માર્ટફોન પર બ્લૂટૂથ સક્ષમ કરો.
- Open the Weather@Home app and follow the on-screen instructions to pair with your BAR218HG unit.
- Once connected, the app will sync the time to the weather station and allow you to view detailed data and history.
હવામાન મથકનું સંચાલન
માહિતી દર્શાવો
The main unit's display shows the following information:
- Outdoor Temperature and Humidity: Current readings from the wireless sensor.
- Indoor Temperature and Humidity: Current readings from the main unit's internal sensors.
- 12-24 Hour Weather Forecast: Graphical representation (sunny, cloudy, rainy, etc.).
- ચંદ્ર તબક્કો: Current moon phase.
- સમય: Current time, synced via app.
- બરફ ચેતવણી: Indication for potential ice conditions.
- Bluetooth Connectivity Icon: Indicates connection status with the app.
- Sensor Signal Strength: Indicates connection quality with the outdoor sensor.
બટનો અને કાર્યો
- DIRECTIONS: Cycles through display modes or enters settings.
- પ્રકાશ: LED બેકલાઇટ સક્રિય કરે છે.
- MEM: Displays minimum/maximum temperature and humidity readings.
- ઉપર/નીચે તીર: Used for adjusting settings or navigating menus.
મોબાઈલ એપનો ઉપયોગ કરવો
The Weather@Home app provides enhanced functionality:
- View temperature and humidity from up to 5 locations (with additional sensors).
- Access 7-day history of temperature and humidity data.
- Data logging capabilities.
- આપોઆપ સમય સુમેળ.
- Easy labeling feature for different sensor locations.
જાળવણી
- સફાઈ: Wipe the main unit and sensor with a soft, damp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
- બેટરી રિપ્લેસમેન્ટ: Replace batteries in both the main unit and the sensor when the low battery indicator appears on the display or in the app.
- સેન્સર પ્લેસમેન્ટ: Periodically check the outdoor sensor's placement to ensure it remains protected from direct elements and is providing accurate readings.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| No outdoor temperature/humidity reading. | Sensor out of range or batteries low/dead. | Move sensor closer to the main unit. Replace sensor batteries. Re-synchronize the sensor (refer to setup section). |
| Inaccurate outdoor readings. | Sensor exposed to direct sunlight or heat sources. | Relocate the sensor to a shaded, well-ventilated area. |
| બ્લૂટૂથ કનેક્શન સમસ્યાઓ. | Bluetooth off on phone, app not running, or unit too far. | Ensure Bluetooth is enabled on your device. Restart the app. Bring your device closer to the weather station. |
| ડિસ્પ્લે ખાલી અથવા ઝાંખું છે. | Main unit batteries are low or dead. | Replace the main unit batteries. |
વિશિષ્ટતાઓ
- મોડલ: BAR218HG
- બ્રાન્ડ: ઓરેગોન વૈજ્ઞાનિક
- ઉત્પાદન પરિમાણો: 18.59 x 9.4 x 5.41 સેમી
- વસ્તુનું વજન: 222 ગ્રામ
- સામગ્રી: પોલીકાર્બોનેટ (PC)
- પાવર સ્ત્રોત: Battery Powered (Main Unit: 4 AA batteries, Sensor: 2 AAA batteries - typical)
- કનેક્ટિવિટી: બ્લૂટૂથ v4.0
- ટ્રાન્સમિશન રેન્જ: ૩૨ ફૂટ સુધી (આશરે ૧૦ મીટર)
- ખાસ લક્ષણો: Clock, Lightweight, Weather Alert, 7-day Data Logger, LED Backlight
વોરંટી અને આધાર
વોરંટી માહિતી
Specific warranty details are typically provided with the product packaging or on the manufacturer's official webસાઇટ. સૌથી સચોટ અને અદ્યતન વોરંટી નિયમો અને શરતો માટે કૃપા કરીને તમારી ખરીદી સાથે સમાવિષ્ટ દસ્તાવેજોનો સંદર્ભ લો.
ગ્રાહક આધાર
For technical assistance, troubleshooting, or inquiries regarding your Oregon Scientific BAR218HG Weather Station, please visit the official Oregon Scientific support website or contact their customer service department. Contact information can usually be found on the product packaging or their webસાઇટ
નોંધ: Additional sensors (e.g., BTHGN129, THN132N, THGR122NX) can be purchased separately to expand monitoring capabilities up to 5 locations.
