પરિચય
This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of the Hach 2291700 Hydrogen Peroxide Test Kit, Model HYP-1. This kit is designed for measuring hydrogen peroxide concentration using a reliable drop count titration method. Adhering to these instructions will ensure accurate results and safe operation.
સલામતી માહિતી
Always prioritize safety when handling chemicals and performing tests. Read all reagent labels carefully before use. Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, to prevent contact with chemicals. In case of contact, refer to the Safety Data Sheet (SDS) for the specific reagent and follow first aid instructions. Keep all chemicals out of reach of children and pets. Dispose of chemical waste according to local regulations.
કિટ ઘટકો
The Hach 2291700 Hydrogen Peroxide Test Kit, Model HYP-1, includes the following items:
- કેસ વહન
- Reagent Bottles (e.g., Sodium Thiosulfate Titrant, Sulfuric Acid)
- Reagent Packets (e.g., Sulfite 1 Indicator)
- 50 mL Erlenmeyer Flask
- ટેસ્ટ ટ્યુબ
- Dropper/Pipette
This image displays the complete Hach 2291700 Hydrogen Peroxide Test Kit. It includes a durable light blue carrying case, two reagent bottles labeled 'HACH', a 50 mL Erlenmeyer flask, two clear test tubes, a dropper, and a sealed bag containing multiple reagent packets. These components are essential for performing the hydrogen peroxide concentration test.
સેટઅપ
Before beginning the test, ensure you have a clean, well-lit workspace and all kit components are readily accessible.
- Open the carrying case and remove all reagents and apparatus.
- Inspect all glassware for cleanliness. Wash with distilled water if necessary and allow to air dry.
- Ensure reagent bottles are tightly capped when not in use to prevent contamination or degradation.
Operating Instructions (Drop Count Titration Method)
Follow these steps carefully to perform the hydrogen peroxide test:
- Sampલે કલેક્શન: Collect a representative water sample in a clean test tube or beaker. The sample volume required will depend on the specific test procedure (refer to the detailed instructions provided with the kit reagents).
- Sampતૈયારી: Transfer the specified volume of sample into the 50 mL Erlenmeyer flask.
- Add Reagent 1 (e.g., Sulfuric Acid): Using the dropper, add the specified number of drops of Reagent 1 to the sample in the flask. Swirl gently to mix.
- Add Reagent 2 (e.g., Sulfite 1 Indicator): Add the specified number of drops or one packet of Reagent 2 (indicator) to the flask. Swirl to dissolve and mix. The sample should develop a distinct color.
- Titration: Hold the Sodium Thiosulfate Titrant bottle vertically over the flask. Add the titrant drop by drop, swirling the flask after each drop. Count the number of drops added.
- અંતિમ બિંદુ: Continue adding titrant until the color of the solution in the flask changes sharply and remains stable for at least 30 seconds. This is the endpoint of the titration.
- રેકોર્ડ પરિણામો: Note the exact number of drops of Sodium Thiosulfate Titrant used to reach the endpoint.
વાંચન પરિણામો
The concentration of hydrogen peroxide is determined by the number of drops of titrant used. Refer to the conversion chart or formula provided with your specific Hach reagents to convert the number of drops into the corresponding hydrogen peroxide concentration (e.g., mg/L or ppm). Each drop typically corresponds to a specific concentration increment.
જાળવણી
- સફાઈ: After each use, thoroughly rinse all glassware (Erlenmeyer flask, test tubes, dropper) with distilled or deionized water. Allow them to air dry completely before storage.
- સંગ્રહ: Store all reagents in their original containers, tightly capped, in a cool, dry place away from direct sunlight. Keep the entire kit in its carrying case to protect components from damage and contamination.
- Reagent Expiration: Check the expiration dates on all reagent bottles and packets. Discard expired reagents properly, as their effectiveness may diminish over time, leading to inaccurate results.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| અચોક્કસ અથવા અસંગત પરિણામો | Contaminated glassware, expired reagents, incorrect sample volume, improper mixing, incorrect drop counting. | Ensure all glassware is clean. Check reagent expiration dates. Verify sample and reagent volumes. Mix thoroughly. Count drops carefully. |
| Endpoint color change is unclear or difficult to observe | Insufficient indicator, incorrect pH, interfering substances in sample, poor lighting. | Ensure correct amount of indicator is added. Check for pH issues if applicable. Use a clean, well-lit area. Consider diluting sample if highly colored. |
| રીએજન્ટ્સ યોગ્ય રીતે ઓગળી રહ્યા નથી | Insufficient mixing, cold sampતાપમાન | Swirl or shake vigorously. Allow sample to reach room temperature if it was very cold. |
વિશિષ્ટતાઓ
- મોડલ નંબર: 2291700
- બ્રાન્ડ: હેચ
- માપન પદ્ધતિ: Drop Count Titration
- વિશ્લેષણ: Hydrogen Peroxide (H₂O₂)
- Kit Capacity: Approximately 100 tests (varies by reagent usage)
- ઉત્પાદક: HACH કંપની
- ASIN: B00N3ZGR2E
વોરંટી અને આધાર
For specific warranty information and technical support, please refer to the documentation included with your purchase or visit the official Hach website. Hach provides comprehensive support resources to ensure the optimal performance of their products.
Hach Company Contact Information:
- Webસાઇટ: www.hach.com
- Customer Service: Refer to the webપ્રાદેશિક સંપર્ક વિગતો માટે સાઇટ.
