બ્રિઝ TB300 સ્ટાન્ડર્ડ T-બોલ્ટ Clamp સૂચના માર્ગદર્શિકા

પરિચય

This instruction manual provides essential information for the proper installation, usage, and maintenance of your Breeze TB300 Standard T-Bolt Clamps. Please read this manual thoroughly before installation to ensure safe and effective operation.

ઉત્પાદન ઓવરview

The Breeze TB300 Standard T-Bolt Clamp is designed for high-strength clamping applications, particularly for securing hoses or pipes. It features a robust construction suitable for demanding environments.

Figure 1: A stainless steel T-Bolt clamp, showing the band, bolt, and nut mechanism. This clamp is designed for securing hoses or pipes in various applications.

મુખ્ય લક્ષણો:

• 3/4" (19 mm) wide, 100% Stainless Steel Band: ટકાઉપણું અને કાટ પ્રતિકાર સુનિશ્ચિત કરે છે.
• High Strength, One-Piece Stainless Steel Trunnion: Provides robust connection and secure fastening.
• Superior welded construction: Enhances overall strength and reliability.
• Meets or exceeds SAE Spec. J1508 for T-Bolt clamps: Guarantees adherence to industry standards for performance.

ઇન્સ્ટોલેશન અને સેટઅપ

Proper installation is crucial for the performance and longevity of the T-Bolt clamp. Follow these steps for secure attachment:

1. Prepare the Connection: Ensure the hose or pipe ends are clean and free from debris.
2. Cl ને સ્થાન આપોamp: Slide the T-Bolt clamp over the hose or pipe, positioning it correctly over the connection point.
3. Align the Bolt: Align the T-bolt with the trunnion and thread the nut onto the bolt.
4. અખરોટને કડક કરો: Using an appropriate wrench, gradually tighten the nut. Apply even pressure to ensure uniform clamping force around the circumference of the hose.
5. Check for Secure Fit: Continue tightening until the hose is firmly secured and there is no leakage (if applicable). Avoid over-tightening, which can damage the hose or the clamp.
6. Verify Torque (Recommended): If a specific torque specification is available for your application, use a torque wrench to achieve the recommended torque value.

ઉપયોગ અને કામગીરી

Once installed, the T-Bolt clamp provides a secure and reliable connection. Its operation is passive, maintaining the integrity of the connection under various pressures and vibrations. Regular inspection is recommended to ensure continued performance.

જાળવણી

To maximize the lifespan and effectiveness of your Breeze TB300 T-Bolt Clamps, consider the following maintenance practices:

• નિયમિત તપાસ: Periodically inspect the clamps for any signs of wear, corrosion, or damage. Check for loose nuts or bolts.
• સફાઈ: If operating in dirty or corrosive environments, clean the clamps as needed to prevent buildup that could affect performance.
• Re-tightening: Over time, vibrations or material settling may cause the clamp to loosen slightly. Re-tighten the nut if necessary to maintain optimal clampબળ.
• બદલી: જો એક સી.એલamp shows significant signs of damage, deformation, or severe corrosion, replace it immediately to prevent failure.

મુશ્કેલીનિવારણ

While T-Bolt clamps are generally reliable, issues can arise. Here are some common problems and their solutions:

વિશિષ્ટતાઓ

The following are the key specifications for the Breeze TB300 Standard T-Bolt Clamp:

• મોડલ નંબર: ટીબી-300
• Effective Diameter Range: ૦.૩૯" - ૩.૫૪" (૧૦ મીમી - ૯૦ મીમી)
• બેન્ડ પહોળાઈ: 3/4" (19 mm)
• સામગ્રી: 100% Stainless Steel Band, High Strength One-Piece Stainless Steel Trunnion, Plated Carbon Steel Bolt.
• અનુપાલન: Meets or exceeds SAE Spec. J1508 for T-Bolt clamps.
• વસ્તુનું વજન: 2 Pounds (for the pack of 10)
• ઉત્પાદક: Breeze Ind. Products

વોરંટી અને આધાર

Specific warranty details for the Breeze TB300 Standard T-Bolt Clamps are not provided in this manual. For warranty information or technical support, please contact Breeze Industrial Products directly or refer to their official webસાઇટ