TROTEC TDS 50 R Electric Fan Heater 9 KW User Manual

1. પરિચય

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your TROTEC TDS 50 R Electric Fan Heater 9 KW. Please read these instructions carefully before using the device for the first time. Keep this manual for future reference.

2. સલામતી સૂચનાઓ

ઉપકરણને ઇજા અને નુકસાન અટકાવવા માટે હંમેશા નીચેની સલામતી સાવચેતીઓનું પાલન કરો:

• Ensure the heater is connected to a properly grounded 400 V power supply.
• Do not cover the heater. Maintain adequate clearance from flammable materials.
• Do not operate the heater in areas with explosive atmospheres or near flammable liquids or gases.
• હીટર ચલાવતી વખતે બાળકો અને પાલતુ પ્રાણીઓને તેનાથી દૂર રાખો.
• Do not touch the heating elements when the device is in use or immediately after use, as they will be hot.
• Always unplug the heater before cleaning, maintenance, or moving.
• જો પાવર કોર્ડ ક્ષતિગ્રસ્ત હોય, તો જોખમને ટાળવા માટે તે ઉત્પાદક, તેના સેવા એજન્ટ અથવા સમાન લાયકાત ધરાવતા વ્યક્તિઓ દ્વારા બદલવું આવશ્યક છે.
• The heater is equipped with overheat protection. If it overheats, it will automatically shut off. Allow it to cool down before restarting.

3. ઉત્પાદન ઓવરview

The TROTEC TDS 50 R is a robust 9 kW electric fan heater designed for construction sites and similar demanding environments. It features a durable metal casing and an integrated thermostat for consistent heat output.

મુખ્ય લક્ષણો:

• 9 kW electric heating capacity.
• Sturdy metal casing for durability.
• Convenient carrying handle for portability.
• Integrated thermostat for automatic temperature control.
• Overheat protection for enhanced safety.
• Operates on a 400 V power supply.

આકૃતિ 1: એકંદરે view of the TROTEC TDS 50 R Electric Fan Heater.

4. સેટઅપ

4.1 અનપેકિંગ

Carefully remove the heater from its packaging. Inspect the device for any signs of damage during transit. If any damage is found, do not operate the heater and contact your supplier.

4.2 પ્લેસમેન્ટ

Place the heater on a stable, level, and non-flammable surface. Ensure there is sufficient clearance around the heater for proper air circulation. Do not place it directly against walls or furniture. Maintain a minimum distance of 1 meter (3 feet) from any combustible materials.

4.3 વિદ્યુત જોડાણ

The TROTEC TDS 50 R requires a 400 V power supply. Ensure the electrical outlet is properly grounded and rated for the heater's power consumption (9 kW). Connect the power plug securely into the appropriate socket.

5. ઓપરેટિંગ સૂચનાઓ

The heater is controlled by two rotary switches located on the front panel.

Figure 2: Control panel with thermostat and power selection switches.

5.1 નિયંત્રણો

• Left Rotary Switch (Thermostat): Adjusts the desired room temperature from MIN to MAX. The heater will cycle on and off to maintain the set temperature.
• Right Rotary Switch (Power Selector): Controls the operating mode and heating power.

5.2 ઓપરેટિંગ મોડ્સ

1. Position 0 (Off): હીટર બંધ છે.
2. Fan Only Mode (ફેન આયકન): The fan operates without heating, providing air circulation.
3. Heating Level 1 (Single Bar Icon): Provides partial heating power.
4. Heating Level 2 (Double Bar Icon): Provides full heating power (9 kW).

૪.૧ હીટર શરૂ કરવું

1. Plug the heater into a suitable 400 V power outlet.
2. Turn the left rotary switch (thermostat) to the desired temperature setting. For continuous heating, set it to MAX.
3. Turn the right rotary switch (power selector) to the desired heating level (Level 1 or Level 2) or to the fan-only mode. The heater will begin operation.

5.4 શટ ડાઉન

To turn off the heater, rotate the right rotary switch (power selector) to position 0. Unplug the device from the power outlet when not in use for extended periods.

6. જાળવણી

નિયમિત જાળવણી તમારા હીટરની ટકાઉપણું અને કાર્યક્ષમ કામગીરી સુનિશ્ચિત કરે છે.

6.1 સફાઈ

• સફાઈ કરતા પહેલા, હંમેશા હીટરને અનપ્લગ કરો અને તેને સંપૂર્ણપણે ઠંડુ થવા દો.
• હીટરના બાહ્ય ભાગને સોફ્ટ, ડીથી સાફ કરોamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• Periodically clean the air inlet and outlet grilles to remove dust and debris. Use a vacuum cleaner or a soft brush.
• Do not immerse the heater in water or spray water directly onto it.

આકૃતિ 3: ફ્રન્ટ view of the heater, showing heating elements behind the protective grille.

આકૃતિ 4: પાછળ view of the heater, showing the fan behind the protective grille.

6.2 સંગ્રહ

If the heater will not be used for an extended period, store it in a dry, dust-free location, preferably in its original packaging. Ensure the power cord is neatly coiled and secured.

7. મુશ્કેલીનિવારણ

ગ્રાહક સપોર્ટનો સંપર્ક કરતા પહેલા, કૃપા કરીને નીચેની સામાન્ય સમસ્યાઓ તપાસો:

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information, technical support, or spare parts, please refer to the documentation provided with your purchase or visit the official TROTEC webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.