પરિચય
This manual provides comprehensive instructions for the safe and efficient use of your Leitz 5530 manual stapler. Please read this guide thoroughly before operating the device to ensure proper function and longevity.
સલામતી સૂચનાઓ
- Keep fingers clear of the stapling mechanism during operation to prevent injury.
- Use only staples of the correct size and type recommended for the Leitz 5530 stapler.
- Do not attempt to staple materials thicker than the stapler's maximum capacity.
- Keep the stapler out of reach of children.
- Avoid dropping the stapler, as this may damage its internal components.
પેકેજ સામગ્રી
- 1 x Leitz 5530 Manual Stapler (Black)
ઉત્પાદન ઓવરview
Familiarize yourself with the components of your Leitz 5530 stapler.
આકૃતિ 1: કોણીય view of the Leitz 5530 manual stapler, showcasinતેની કોમ્પેક્ટ ડિઝાઇન અને કાળા રંગની પૂર્ણાહુતિ.
આકૃતિ 2: બાજુ view of the Leitz 5530 manual stapler, illustrating its ergonomic shape and staple exit point.
આકૃતિ 3: ટોચ view of the Leitz 5530 manual stapler, highlighting the "PUSH" button for staple loading and the "OPEN" latch for the staple channel.
Setup: Loading Staples
- Locate the "PUSH" button on the top rear of the stapler (refer to Figure 3).
- Press the "PUSH" button firmly to release the staple channel. The top cover will spring open.
- Pull the staple channel completely out until it locks into place.
- Insert a strip of Leitz 24/6 or 26/6 staples into the channel with the staple points facing downwards.
- Push the staple channel back into the stapler until it clicks securely into place.
- Close the top cover until it latches.
તમારું સ્ટેપલર હવે ઉપયોગ માટે તૈયાર છે.
ઓપરેટિંગ સૂચનાઓ
- Gather the papers you wish to staple, ensuring they are neatly aligned.
- Insert the papers into the stapler's throat, positioning them where you want the staple to be placed.
- Press down firmly and evenly on the top of the stapler until the staple penetrates the paper and clinches underneath.
- Release the stapler. The stapled papers can now be removed.
Do not force the stapler if it encounters resistance, as this may cause jams or damage.
જાળવણી
સ્ટેપલ જામ ક્લિયરિંગ
- If a staple jam occurs, first remove any paper from the stapler.
- Open the staple channel as described in the "Loading Staples" section.
- Carefully remove any bent or jammed staples from the channel using tweezers or a small, flat tool. Be cautious to avoid injury.
- Ensure the staple channel is clear before reloading new staples and closing the stapler.
સફાઈ
Wipe the exterior of the stapler with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Staples not feeding | Staple channel empty or jammed. | Reload staples or clear any jams (see Maintenance). |
| Staples bending or not clinching | Incorrect staple size, too many papers, or misaligned papers. | Ensure correct staple size (24/6 or 26/6), reduce paper stack, or align papers properly. |
| Stapler feels stiff or difficult to press | Mechanism may be dirty or jammed. | Clear any visible debris. If persistent, contact support. |
વિશિષ્ટતાઓ
| બ્રાન્ડ | લીટ્ઝ |
| મોડલ નંબર | 55300095 |
| ઉત્પાદન પરિમાણો | ૨૯ x ૧૪ x ૩૧ સેમી (આશરે) |
| વસ્તુનું વજન | 100 ગ્રામ |
| રંગ | કાળો |
| ઓપરેશન મોડ | મેન્યુઅલ |
| સુસંગત સ્ટેપલ્સ | Leitz 24/6 or 26/6 |
વોરંટી અને આધાર
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Leitz webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.
For further assistance, please contact Leitz customer service.
