1. પરિચય
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Paulmann LED Driver. This constant current LED driver is designed to operate 700mA LED luminaires and features dimmable functionality. Please read these instructions carefully before installation and retain them for future reference.
2. મહત્વપૂર્ણ સલામતી સૂચનાઓ
- બધા સ્થાનિક અને રાષ્ટ્રીય વિદ્યુત કોડ્સ અનુસાર સ્થાપન લાયક ઇલેક્ટ્રિશિયન દ્વારા થવું જોઈએ.
- Disconnect power at the circuit breaker before installing or servicing the driver.
- Ensure correct polarity when connecting LED luminaires to the driver output.
- ૧૦૦ વોટની મહત્તમ લોડ ક્ષમતા ઓળંગશો નહીં.
- આ ઉત્પાદન માત્ર ઇન્ડોર ઉપયોગ માટે રચાયેલ છે.
- ડ્રાઇવર હાઉસિંગ ખોલશો નહીં; અંદર કોઈ વપરાશકર્તા-સેવાયોગ્ય ભાગો નથી.
3. ઉત્પાદન ઓવરview
The Paulmann LED Driver (Model 97732) is a compact, white constant current power supply for LED lighting applications. It features universal dimming capabilities.
Image: The Paulmann LED Driver, Model 97732. The label on the driver indicates it is a Dimmable Universal LED Driver 30VA, with a primary input of 220-240Vac 50/60Hz and a secondary output of 700mA 30-43Vdc (Max. 48V no load). It also shows operating temperatures Ta=50°C and Tc=85°C, along with various safety certifications.
4. ટેકનિકલ વિશિષ્ટતાઓ
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| બ્રાન્ડ | પોલમેન |
| મોડલ નંબર | 97732 |
| ઉત્પાદક | પોલમેન |
| ઇનપુટ વોલ્યુમtage | 220-240 વેક, 50/60 હર્ટ્ઝ |
| આઉટપુટ વર્તમાન | 700mA સતત વર્તમાન |
| આઉટપુટ વોલ્યુમtage રેન્જ | 30-43Vdc (Max. 48V no load) |
| મહત્તમ શક્તિ | 30W |
| ડિમેબલ | Yes, with R, L, C type dimmers |
| Operating Ambient Temperature (Ta) | મહત્તમ 50°C |
| કેસનું તાપમાન (Tc) | મહત્તમ 85°C |
| સામગ્રી | પ્લાસ્ટિક |
| રંગ | સફેદ |
| રક્ષણ વર્ગ | વર્ગ II |
5. ઇન્સ્ટોલેશન અને વાયરિંગ
યોગ્ય ઇન્સ્ટોલેશન માટે આ પગલાં અનુસરો:
- પાવર ડિસ્કનેક્શન: Before starting any electrical work, ensure the main power supply to the circuit is switched off at the circuit breaker.
- ટર્મિનલ્સ ઓળખો: The driver has clearly marked input (PRI) and output (SEC) terminals. The input terminals are for AC power, and the output terminals are for DC power to the LED luminaires.
- ઇનપુટ કનેક્ટ કરો: Connect the AC mains supply (220-240Vac) to the input terminals of the driver. Ensure live, neutral, and earth connections (if applicable) are correctly wired according to local regulations.
- આઉટપુટ કનેક્ટ કરો: Connect your 700mA constant current LED luminaires to the output terminals of the driver. Observe correct polarity (+ to + and - to -). Ensure the total wattage of the connected LEDs does not exceed 30W.
- Secure Driver: Mount the driver in a suitable, well-ventilated location, away from direct heat sources and moisture. Ensure it is securely fastened.
- પાવર પુન Restસ્થાપિત કરો: એકવાર બધા જોડાણો સુરક્ષિત અને ચકાસાયેલ થઈ જાય, પછી સર્કિટમાં પાવર પુનઃસ્થાપિત કરો.
Warning: Incorrect wiring can cause damage to the driver, LED luminaires, or pose a safety hazard. If you are unsure, consult a qualified electrician.
6. ઓપરેશન
The Paulmann LED Driver provides a constant current output of 700mA, suitable for compatible LED luminaires. Once installed and powered, the connected LEDs will illuminate.
ડિમિંગ કાર્યક્ષમતા: This driver is dimmable and compatible with common R, L, and C type dimmers. Connect a suitable dimmer switch to the AC input circuit of the driver to control the light output of the connected LEDs. Refer to your dimmer's instructions for specific wiring and compatibility.
7. જાળવણી
The Paulmann LED Driver requires minimal maintenance. Follow these guidelines:
- સફાઈ: Ensure the driver is disconnected from power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- નિરીક્ષણ: Periodically check for any visible damage to the housing or wiring. If any damage is observed, disconnect power immediately and replace the driver.
- વેન્ટિલેશન: Ensure the driver's ventilation is not obstructed to prevent overheating.
8. મુશ્કેલીનિવારણ
If you encounter issues with your LED driver, refer to the following common problems and solutions:
- કોઈ પ્રકાશ આઉટપુટ નથી:
- પાવર સપ્લાય જોડાયેલ અને સક્રિય છે કે નહીં તે તપાસો.
- Verify all wiring connections (input and output) are secure and correct.
- Ensure the LED luminaires are compatible with a 700mA constant current driver.
- કુલ વોટ છે કે નહીં તે તપાસોtage of connected LEDs exceeds the driver's 30W maximum.
- Test the LED luminaires with a known working driver, if possible.
- Flickering or Unstable Light:
- Ensure the dimmer switch is compatible with R, L, or C type dimmers and is correctly installed.
- છૂટા વાયરિંગ જોડાણો માટે તપાસો.
- Verify the load is within the driver's specified range.
- Driver Overheating:
- ડ્રાઇવરની આસપાસ પૂરતું વેન્ટિલેશન સુનિશ્ચિત કરો.
- Verify the total wattage of connected LEDs does not exceed 30W.
If the problem persists after attempting these solutions, contact Paulmann customer support or a qualified electrician.
9. વોરંટી અને સપોર્ટ
Specific warranty information for this product was not provided in the available data. For details regarding warranty coverage, technical support, or replacement parts, please contact Paulmann directly through their official website or customer service channels. Always provide your product model number (97732) when seeking support.
