Datalogic QuickScan I QBT2131 Handheld Barcode Scanner User Manual

1. પરિચય

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Datalogic QuickScan I QBT2131 Handheld Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ તમારા ઉત્પાદન પેકેજમાં હાજર છે:

• Datalogic QuickScan I QBT2131 Handheld Barcode Scanner
• યુએસબી કેબલ
• લિથિયમ-આયન બેટરી (પહેલાથી ઇન્સ્ટોલ કરેલી અથવા અલગ)
• ઝડપી શરૂઆત માર્ગદર્શિકા (જો લાગુ હોય તો)

Note: An AC adapter for charging may be sold separately.

3. ઉત્પાદન ઓવરview

The Datalogic QuickScan I QBT2131 is a 1D linear imager barcode scanner designed for efficient data capture in retail and warehouse environments. It features Bluetooth wireless technology for flexible operation and a durable design.

આકૃતિ 1: Datalogic QuickScan I QBT2131 Handheld Barcode Scanner in its charging cradle. The scanner is dark gray with a blue trigger button, and the cradle is also dark gray with two indicator lights on its front panel.

ઘટકો:

• સ્કેનર હેડ: Contains the imaging window and scanning engine.
• ટ્રિગર બટન: Activates the scanning beam.
• હેન્ડલ: Ergonomic grip for comfortable use.
• Charging/Communication Base: Provides power and data connection.
• સૂચક લાઇટ્સ: On the scanner and base, indicating status (e.g., battery, connection).

4. સેટઅપ

૪.૨. બેટરી ઇન્સ્ટોલેશન અને ચાર્જિંગ

1. બેટરી ઇન્સ્ટોલ કરો: If the battery is not pre-installed, open the battery compartment cover on the scanner handle and insert the Lithium-ion battery, ensuring correct polarity. Close the cover securely.
2. પ્રારંભિક ચાર્જ: Place the scanner into its charging base. Connect the USB cable to the charging base and then to a powered USB port on a computer or a compatible USB power adapter (sold separately). The charging indicator light on the base will illuminate, typically amber or red, during charging and turn green when fully charged. Allow approximately 4 hours for a full charge before first use.

4.2. Connecting the Base to a Host Device

The charging base serves as the communication interface for the scanner.

1. યુએસબી કનેક્શન: Connect one end of the provided USB cable to the USB port on the charging base. Connect the other end of the USB cable to an available USB port on your computer or host system.
2. ડ્રાઇવર ઇન્સ્ટોલેશન: તમારી ઓપરેટિંગ સિસ્ટમ આપમેળે જરૂરી ડ્રાઇવરો શોધી કાઢશે અને ઇન્સ્ટોલ કરશે. જો પૂછવામાં આવે, તો સ્ક્રીન પરની સૂચનાઓનું પાલન કરો.

4.3. Pairing the Scanner via Bluetooth

The QBT2131 scanner uses Bluetooth to communicate wirelessly with its base or other Bluetooth-enabled host devices.

1. પાવર ચાલુ: ખાતરી કરો કે સ્કેનર ચાર્જ થયેલ છે અને ચાલુ છે.
2. જોડી મોડ દાખલ કરો: Refer to the Quick Start Guide or Datalogic's official documentation for the specific barcode sequence to put the scanner into Bluetooth pairing mode. This usually involves scanning a special "Pairing Mode" barcode.
3. Pair with Base: If pairing with its dedicated base, place the scanner into the base while it is in pairing mode. The scanner and base will automatically attempt to establish a connection.
4. Pair with Host (Direct): If pairing directly with a Bluetooth-enabled computer or mobile device, search for Bluetooth devices on your host. Select "Datalogic QBT2131" (or similar) from the list and follow any on-screen prompts to complete the pairing process.
5. પુષ્ટિ: A successful connection is typically indicated by a specific LED pattern or an audible beep from the scanner.

5. ઓપરેટિંગ સૂચનાઓ

૪.૧. મૂળભૂત સ્કેનિંગ

1. ધ્યેય: Point the scanner's imaging window at the barcode you wish to scan.
2. ટ્રિગર: ટ્રિગર બટન દબાવો અને પકડી રાખો. એક લાલ લક્ષ્ય રેખા દેખાશે.
3. સ્કેન: Position the aiming line across the entire barcode. Once successfully read, the scanner will emit an audible beep and/or the green "good read" LED will illuminate.
4. પ્રકાશન: ટ્રિગર બટન છોડો.

Ensure the barcode is clean and flat for optimal scanning performance.

5.2. Indicator Lights and Sounds

• Green LED (Scanner/Base): Good read, fully charged battery, or connected.
• Red/Amber LED (Scanner/Base): Charging, low battery, or error.
• બીપ્સ: Indicate successful reads, errors, or mode changes. Consult the full product reference guide for specific beep codes.

6. જાળવણી

6.1. સ્કેનર સાફ કરવું

• Use a soft, clean cloth dampપાણી અથવા હળવા, ઘર્ષક ન હોય તેવા સફાઈ દ્રાવણથી સાફ કરો.
• Gently wipe the scanner's exterior, especially the imaging window.
• Do not use harsh chemicals, abrasive cleaners, or immerse the device in liquid.

6.2. બેટરી કેર

• શ્રેષ્ઠ કામગીરી જાળવવા માટે બેટરીને નિયમિતપણે ચાર્જ કરો.
• અતિશય તાપમાન ટાળો, જે બેટરીના જીવનને ઘટાડી શકે છે.
• If the scanner will not be used for an extended period, store it with a partial charge (around 50%) in a cool, dry place.

7. મુશ્કેલીનિવારણ

If the problem persists, please contact Datalogic customer support.

8. સ્પષ્ટીકરણો

• મોડલ: QBT2131-BK-BTK1
• પરિમાણો: 1.61 x 3.58 x 6.42 ઇંચ
• વજન: 6.7 ઔંસ
• કનેક્ટિવિટી: USB Cable, Bluetooth
• Imager Type: 1 ડી રેખીય ઇમેજર
• બેટરી: 1 લિથિયમ આયન બેટરી (સમાવેલ)
• સુસંગત ઉપકરણો: ડેસ્કટોપ, લેપટોપ
• રંગ: કાળો
• ઉત્પાદક: ડેટાલોજિક એસપીએ

9. વોરંટી માહિતી

Datalogic products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Datalogic webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.

10. ગ્રાહક આધાર

For technical assistance, product inquiries, or service, please contact Datalogic customer support through their official website or the contact information provided in your product documentation. You may also find additional resources, FAQs, and software downloads on the Datalogic support portal.