પરિચય
This manual provides instructions for the safe and effective use of your ProMaster Camera Phone Tripod Mount Model 3421. Please read this manual thoroughly before use and retain it for future reference. This device is designed to securely attach smartphones to tripods or other mounting systems equipped with a standard 1/4"-20 screw.
ઉત્પાદન ઓવરview
The ProMaster Camera Phone Tripod Mount Model 3421 features an adjustable opening to accommodate various smartphone sizes and a durable metal 1/4"-20 female thread for universal compatibility with tripods and monopods.
આકૃતિ 1: બાજુ view of the ProMaster Camera Phone Tripod Mount, showing its compact design.
આકૃતિ 2: ટોચ view of the mount, illustrating the adjustable opening with a measurement scale and the 1/4"-20 female thread mount.
સેટઅપ
- Attach to Tripod: Locate the 1/4"-20 female thread at the base of the phone mount. Screw the mount onto the 1/4"-20 male screw of your tripod or monopod until it is securely fastened. Do not overtighten.
- Insert Smartphone: Gently pull the top jaw of the mount upwards to open the adjustable grip. Carefully place your smartphone into the mount, ensuring it is centered and the jaws securely hold the device without obstructing buttons or ports. The mount accommodates phones with a minimum width of 2 inches and a maximum width of 3 3/4 inches.
- સ્થિરતા ચકાસો: Once the phone is in place, ensure it is firmly held and does not wobble. Adjust the phone's position if necessary.
ઓપરેટિંગ સૂચનાઓ
- Adjusting Phone Position: The mount allows for both vertical and horizontal phone orientation, depending on your tripod head's capabilities. Ensure the phone is balanced to prevent tipping.
- સુરક્ષિત પકડ: The spring-loaded mechanism provides a strong grip. Always check that your phone is fully seated and held firmly before leaving it unattended.
- Removing Smartphone: To remove your smartphone, gently pull the top jaw upwards to release the tension and carefully lift the phone out of the mount.
જાળવણી
- સફાઈ: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the material.
- સંગ્રહ: ઉપયોગમાં ન હોય ત્યારે માઉન્ટને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
- નિરીક્ષણ: Periodically inspect the mount for any signs of wear or damage, especially the spring mechanism and the 1/4"-20 thread. Do not use if damaged.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Smartphone does not fit in the mount. | Smartphone dimensions exceed the mount's capacity. | Ensure your smartphone's width is between 2 inches and 3 3/4 inches. Remove bulky cases if necessary. |
| Mount feels unstable on the tripod. | Mount not securely attached to the tripod. | Tighten the mount onto the tripod's 1/4"-20 screw until firm. Check the tripod's stability as well. |
| Phone slips out of the mount. | Phone not properly seated or mount is damaged. | Ensure the phone is centered and fully gripped by the jaws. Inspect the spring mechanism for damage. If damaged, discontinue use. |
વિશિષ્ટતાઓ
આકૃતિ 3: Dimensions of the ProMaster Camera Phone Tripod Mount.
- મોડલ: 3421
- બ્રાન્ડ: પ્રોમાસ્ટર
- સામગ્રી: ધાતુ
- માઉન્ટિંગ થ્રેડ: Metal 1/4" - 20 female thread
- Minimum Opening: 2 ઇંચ (5.08 સે.મી.)
- મહત્તમ ઉદઘાટન: 3 3/4 ઇંચ (9.53 સેમી)
- ઉત્પાદનના પરિમાણો (H x W x D): 2 5/8" x 2 3/16" x 1 1/4" (approx. 6.67 cm x 5.56 cm x 3.18 cm)
- વસ્તુનું વજન: 1.6 ઔંસ (45.36 ગ્રામ)
- સુસંગત ઉપકરણો: સ્માર્ટફોન
- વજન મર્યાદા: 6.6 Pounds (3 kg) - Note: This refers to the maximum weight the mount itself can support, not the phone's weight.
વોરંટી અને આધાર
For detailed warranty information, product registration, or technical support, please visit the official ProMaster webતમે જેની પાસેથી ઉત્પાદન ખરીદ્યું છે તે રિટેલરની સાઇટ પર જાઓ અથવા સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.
ProMaster Official Webસાઇટ: ProMaster Store on Amazon
