Legrand LEG97605

Legrand LEG97605 300W નોન-ફ્લશ રોટરી ડિમર સ્વિચ યુઝર મેન્યુઅલ

1. પરિચય

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.

Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch, front view

આકૃતિ 1: ફ્રન્ટ view of the Legrand LEG97605 Dimmer Switch.

2. મહત્વપૂર્ણ સલામતી માહિતી

WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.

  • ઇન્સ્ટોલેશન લાયક ઇલેક્ટ્રિશિયન દ્વારા અથવા સ્થાનિક ઇલેક્ટ્રિકલ કોડ્સ અનુસાર થવું જોઈએ.
  • મહત્તમ વોટ કરતાં વધી જશો નહીંtag300W નું e રેટિંગ.
  • ખાતરી કરો કે બધા વાયર કનેક્શન સુરક્ષિત અને યોગ્ય રીતે ઇન્સ્યુલેટેડ છે.
  • આ ઉપકરણ ફક્ત અંદરના ઉપયોગ માટે રચાયેલ છે.
  • Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.

3. પેકેજ સામગ્રી

ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે:

  • Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
  • Mounting Screws (Quantity may vary)
  • સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)
Legrand LEG97605 Dimmer Switch in its packaging

Figure 2: Legrand LEG97605 Dimmer Switch as packaged.

4. ઇન્સ્ટોલેશન સૂચનાઓ

Follow these steps carefully to install your dimmer switch:

  1. પાવર બંધ કરો: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltagઆગળ વધતા પહેલા e ટેસ્ટર.
  2. માઉન્ટ કરવાનું સ્થાન તૈયાર કરો: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
  3. વાયરિંગ:
    • Identify the live (line) wire and the load wire (to the light fixture).
    • Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
    • Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
    • Ensure all connections are tight using the screw terminals.
  4. માઉન્ટ કરવાનું: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
  5. પાવર પુન Restસ્થાપિત કરો: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
Legrand LEG97605 Dimmer Switch, top view showing terminals

આકૃતિ 3: ટોચ view of the dimmer switch, illustrating potential wiring points.

5. Operating Your Dimmer Switch

The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.

  • To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
  • ઝાંખું/તેજસ્વી કરવા માટે: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Legrand LEG97605 Dimmer Switch, angled view showing rotary knob

આકૃતિ 4: કોણીય view highlighting the rotary control knob.

6. જાળવણી

Your Legrand dimmer switch requires minimal maintenance.

  • સફાઈ: To clean the surface of the dimmer, wipe with a soft, damp કાપડ. ઘર્ષક ક્લીનર્સ, સોલવન્ટ્સ અથવા કઠોર રસાયણોનો ઉપયોગ કરશો નહીં, કારણ કે આ ફિનિશને નુકસાન પહોંચાડી શકે છે.
  • નિરીક્ષણ: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.

7. મુશ્કેલીનિવારણ

જો તમને તમારા ડિમર સ્વિચમાં સમસ્યાઓનો અનુભવ થાય, તો નીચેની સામાન્ય સમસ્યાઓ અને ઉકેલોનો સંદર્ભ લો:

સમસ્યાસંભવિત કારણઉકેલ
પ્રકાશ ચાલુ થતો નથી.સ્વીચમાં પાવર નથી; ખોટી વાયરિંગ.Check circuit breaker/fuse. Verify wiring connections are correct and secure.
Light does not dim or dims poorly.Incompatible bulb type; minimum load not met.Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any).
પ્રકાશ ઝબકે છે અથવા ગુંજારવ કરે છે.Loose wiring connection; incompatible bulb type; electrical interference.Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists.
Dimmer feels hot to the touch.Overload or improper wiring.Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician.

If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.

8. ટેકનિકલ વિશિષ્ટતાઓ

લક્ષણવિગત
બ્રાન્ડલેગ્રાન્ડ
મોડલ નંબરLEG97605
ઓપરેશન મોડચાલું બંધ
વર્તમાન રેટિંગ10 Amps
વાટtage300 વોટ્સ
સંપર્ક પ્રકારસામાન્ય રીતે ખોલો
કનેક્ટર પ્રકારસ્ક્રૂ
ટર્મિનલસ્ક્રૂ
સર્કિટ પ્રકાર1-માર્ગ
એક્ટ્યુએટર પ્રકારરોટરી
નિયંત્રક પ્રકારબટન દબાવો
સંપર્ક સામગ્રીકોપર
આંતરરાષ્ટ્રીય સુરક્ષા રેટિંગIP54
માઉન્ટિંગ પ્રકારસપાટી માઉન્ટ
રંગસફેદ
વસ્તુનું વજન2.46 ઔંસ
તારીખ પ્રથમ ઉપલબ્ધસપ્ટેમ્બર 25, 2015

9. વોરંટી અને ગ્રાહક સપોર્ટ

For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webસૌથી અદ્યતન સંપર્ક વિગતો માટે સાઇટ અથવા ઉત્પાદન પેકેજિંગ.

Legrand Official Webસાઇટ: www.legrand.us

સંબંધિત દસ્તાવેજો - LEG97605

પ્રિview લેગ્રાન્ડ પાસ અને સીમોર રેડિયન્ટ LED એડવાન્સ્ડ ડિમર RHL153P - 150W ફ્લિકર-મુક્ત નિયંત્રણ
લેગ્રાન્ડ પાસ અને સીમોર રેડિયન્ટ LED એડવાન્સ્ડ ડિમર (RHL153P) શોધો. આ 150W ડિમર LED, CFL અને ઇન્કેન્ડેસેન્ટ બલ્બ માટે ફ્લિકર-ફ્રી કંટ્રોલ પ્રદાન કરે છે, જેમાં અદ્યતન ડિમિંગ ટેકનોલોજી, સરળ કેલિબ્રેશન અને આધુનિક ડિઝાઇનનો સમાવેશ થાય છે. રહેણાંક અને વાણિજ્યિક એપ્લિકેશનો માટે આદર્શ.
પ્રિview Legrand 4 120 40/4 120 41 EMDX³ Energy Meter Technical Specifications and Wiring Guide
Detailed technical specifications, installation instructions, and wiring diagrams for the Legrand 4 120 40 and 4 120 41 EMDX³ three-phase energy meters. Includes RS485 Modbus connectivity and safety guidelines.
પ્રિview Wattstopper Auxiliary Relay Power Pack Installation Guide
Detailed installation instructions and wiring diagram for the Wattstopper Auxiliary Relay Power Pack (Model S120/277/347E-P) by Legrand. Includes safety warnings and warranty information.
પ્રિview How to Eliminate Bulb Flickering with Legrand Radiant Dimmers
Troubleshoot and eliminate bulb flickering on your Legrand Radiant dimmer by recalibrating settings. This guide provides step-by-step instructions to adjust the calibration wheel for optimal performance.
પ્રિview Legrand WNRL63 radiant® Wireless Smart Dimmer with Netatmo Installation Guide
Step-by-step installation instructions for the Legrand WNRL63 radiant® Wireless Smart Dimmer with Netatmo. Covers installation methods, setup via the Legrand Home + Control app, device features, regulatory information, and warranty details.
પ્રિview Legrand Valena Allure Connected Switch Installation Guide
Comprehensive installation guide for the Legrand Valena Allure with Netatmo connected switch (with dimmer option), covering product features, characteristics, wiring instructions, safety precautions, and compatibility. Includes model numbers 7525 84A, 7526 84A, 7527 84A, 7528 84A, and 7529 84A.