RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock User Manual

1. પરિચય

ખરીદી બદલ આભારasing the RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock. This device is a radio-controlled alarm clock equipped with a thermometer, hygrometer, and calendar display. Its compact design and user-friendly interface make it ideal for various indoor settings. This manual provides detailed instructions to help you set up, operate, and maintain your new alarm clock.

મુખ્ય લક્ષણો:

• Atomic Clock Movement: Automatically synchronizes time via radio waves for precise accuracy.
• તાપમાન પ્રદર્શન: Shows ambient temperature from -9.9 to 50 ℃.
• ભેજ પ્રદર્શન: Shows ambient humidity from 20% to 95%.
• Electronic Sound Alarm: Features an alarm with an auto-stop function.
• સ્નૂઝ ફંક્શન: અસ્થાયી રૂપે એલાર્મને શાંત કરે છે.
• Dial Light: Includes an afterglow function for visibility in low light (5 seconds).
• કૅલેન્ડર ડિસ્પ્લે: Shows date and day of the week, including Rokuyoku (Japanese traditional calendar).
• ૧૨/૨૪ કલાક ડિસ્પ્લે: Switchable time format.

2. પેકેજ સામગ્રી

કૃપા કરીને તપાસો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock
• સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)

Note: 2 x AA manganese batteries are required and sold separately.

3. ઉત્પાદન ઓવરview

આગળ View and Display Elements:

This image displays the front of the RHYTHM 8RZ166SR03 alarm clock. It features a large digital LCD screen at the top, showing time, date, temperature, and humidity. Below the screen are five circular control buttons labeled (from left to right): Monitor, Time Adjustment, Reset, Back, and Forward.

This diagram illustrates the various elements of the LCD display:

• સમય પ્રદર્શન: Shows the current time in 12-hour (AM/PM) or 24-hour format.
• Radio Wave Reception Indicator: Displays the status of radio wave reception.
• એલાર્મ સૂચક: An icon appears when the alarm is activated.
• તાપમાન પ્રદર્શન: વર્તમાન ઓરડાના તાપમાને બતાવે છે.
• ભેજ પ્રદર્શન: Shows the current room humidity.
• કૅલેન્ડર ડિસ્પ્લે: Shows the current date and day of the week, including Rokuyoku.

પાછળ View અને નિયંત્રણો:

The back of the clock features the alarm ON/OFF slide switch on the left side and the battery compartment cover in the center. The model number '8RZ166' and 'MADE IN CHINA' are also visible.

Control Buttons Explained:

This image details the function of each button:

• મોનિટર બટન: Used to check the alarm sound.
• Time Adjustment Button: Used for manual time setting and switching between 12/24 hour display.
• રીસેટ બટન: Resets the clock and also functions as a forced radio wave reception button.
• Back Button (←): Used to decrease values during alarm or time settings.
• Forward Button (→): Used to increase values during alarm or time settings.
• Alarm Switch (on back): Slides up for ON, down for OFF.
• Snooze Button (top): Activates the snooze function and the dial light.

4. સેટઅપ

4.1 બેટરી ઇન્સ્ટોલેશન

1. Remove the battery compartment cover on the back of the clock.
2. Insert two (2) AA manganese batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.


This image shows the open battery compartment with two AA batteries correctly inserted, indicating the positive and negative terminals.

3. બેટરી કમ્પાર્ટમેન્ટ કવર બદલો.

4.2 Initial Power On and Radio Wave Reception

After battery installation, the clock will automatically attempt to receive radio waves to set the correct time. This process may take several minutes. Ensure the clock is placed in an area with good reception, away from electronic devices that may cause interference.

This diagram illustrates how radio-controlled clocks receive standard time signals from two transmission stations (one in Fukushima, 40kHz, and one in Fukuoka/Saga, 60kHz) to automatically correct and display the precise time. The clock will automatically adjust its time based on these signals.

If reception is successful, the time will be set automatically. If not, you may need to manually set the time (refer to Section 5.1).

5. ઓપરેટિંગ સૂચનાઓ

5.1 Manual Time and Date Setting

In cases where radio wave reception is difficult or for specific time zone adjustments:

1. દબાવો અને પકડી રાખો સમય ગોઠવણ સમય પ્રદર્શન ફ્લેશ થવાનું શરૂ થાય ત્યાં સુધી બટન.
2. નો ઉપયોગ કરો Back (←) અને Forward (→) કલાકોને સમાયોજિત કરવા માટે બટનો.
3. દબાવો સમય ગોઠવણ button again to move to minutes, then adjust using Back (←) અને Forward (→).
4. દબાવવાનું ચાલુ રાખો સમય ગોઠવણ વર્ષ, મહિનો અને દિવસ સેટિંગ્સ દ્વારા ચક્ર કરવા માટે, દરેકને ગોઠવીને Back (←) અને Forward (→).
5. બધી સેટિંગ્સ યોગ્ય થઈ જાય પછી, દબાવો સમય ગોઠવણ button one last time to confirm and exit the setting mode.

5.2 એલાર્મ સેટિંગ્સ

1. એલાર્મનો સમય સેટ કરવા માટે, દબાવો અને પકડી રાખો સમય ગોઠવણ button until the alarm time starts flashing (this may require cycling past the current time settings if already in manual time setting mode).
2. નો ઉપયોગ કરો Back (←) અને Forward (→) buttons to set the desired alarm hour and minute.
3. દબાવો સમય ગોઠવણ એલાર્મ સમયની પુષ્ટિ કરવા માટે બટન.

૪.૨ એલાર્મને સક્રિય/નિષ્ક્રિય કરવું

નો ઉપયોગ કરો Alarm ON/OFF slide switch located on the back of the clock:

• સ્વિચ સ્લાઇડ કરો UP to activate the alarm. An alarm icon will appear on the display.
• સ્વિચ સ્લાઇડ કરો નીચે to deactivate the alarm. The alarm icon will disappear.

5.4 Snooze Function and Dial Light

જ્યારે એલાર્મ વાગે, ત્યારે મોટું દબાવો સ્નૂઝ બટન located on the top of the clock. This will:

• Temporarily silence the alarm (snooze duration is preset).
• Activate the dial light for approximately 5 seconds, illuminating the display for easy viewઅંધારામાં

The alarm will sound again after the snooze period. To stop the alarm completely, slide the એલાર્મ ચાલુ/બંધ સ્વીચ બંધ કરવા માટે.

5.5 Display Modes (12/24 Hour Format)

To switch between 12-hour (with AM/PM indicator) and 24-hour time formats, briefly press the સમય ગોઠવણ button outside of setting mode.

5.6 Checking Alarm Sound

માટે પૂર્વview the alarm sound, press the મોનીટર button on the front of the clock.

6. જાળવણી

6.1 સફાઈ

To clean the clock, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing અથવા ડિસ્પ્લે.

6.2 બેટરી રિપ્લેસમેન્ટ

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. It is recommended to replace both batteries at the same time with new ones.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

RHYTHM products are manufactured with high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact the RHYTHM customer support or your local distributor. Keep your purchase receipt as proof of purchase.