પરિચય
The Niteye SE-A01 is a compact and powerful AAA flashlight designed for everyday carry and general utility. Despite its small size, it delivers significant illumination and features a user-friendly interface. This manual provides comprehensive instructions for its setup, operation, maintenance, and troubleshooting, ensuring you get the most out of your device.

Image: The Niteye SE-A01 AAA Flashlight, showcasing its compact design and integrated pocket clip.
પેકેજ સામગ્રી
- 1 x SE-A01 Flashlight with Click Switch
- Spare O-Rings
- વપરાશકર્તા માર્ગદર્શિકા
- વોરંટી કાર્ડ
- Quality Inspection Card
સેટઅપ
બેટરી ઇન્સ્ટોલેશન
The Niteye SE-A01 operates on a single AAA battery. Ensure correct polarity during installation to prevent damage to the device.
- ફ્લેશલાઇટને ઘડિયાળની વિરુદ્ધ દિશામાં ફેરવીને તેની પૂંછડીની ટોપી ખોલો.
- એક AAA બેટરી દાખલ કરો જેમાં ધન (+) છેડો ફ્લેશલાઇટના માથા તરફ હોય.
- પૂંછડીની ટોપી ઘડિયાળની દિશામાં પાછી સ્ક્રૂ કરો જ્યાં સુધી તે સુરક્ષિત રીતે કડક ન થાય.

છબી: પાછળનો ભાગ view of the Niteye SE-A01, highlighting the tail cap and click switch for battery access and operation.
ઓપરેટિંગ સૂચનાઓ
પાવર ચાલુ/બંધ
To turn the flashlight on or off, fully press the tail switch until you hear a distinct click.
મોડ પસંદગી
The SE-A01 features three distinct light levels: High, Mid, and Low. To cycle through these modes:
- With the flashlight turned on, gently half-press the tail switch (without clicking) to advance to the next mode.
- Repeat half-presses to cycle through the sequence: High → Mid → Low.
The flashlight is equipped with a memory function that automatically recalls the last used mode when the device is turned off and then back on.

છબી: આગળ view of the Niteye SE-A01, showing the TIR lens and XP-G LED, which provide efficient light output.
જાળવણી
સફાઈ
Regularly clean the flashlight's body with a soft, slightly damp cloth. For the lens, use a specialized lens cleaning cloth to avoid scratches. Do not use abrasive cleaners or harsh chemicals.
ઓ-રિંગ લ્યુબ્રિકેશન
To maintain the flashlight's water resistance, periodically lubricate the O-rings with silicone grease. Replace any worn or damaged O-rings with the provided spares to ensure a proper seal.
બેટરી કેર
If the flashlight will not be used for an extended period, it is recommended to remove the battery. This prevents potential battery leakage and subsequent damage to the internal components of the device.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ફ્લેશલાઇટ ચાલુ થતી નથી. | Battery is dead or incorrectly inserted; tail cap is loose. | Replace battery or check polarity. Ensure tail cap is fully tightened. |
| પ્રકાશ ઝબકે છે અથવા ઝાંખો છે. | Low battery; loose tail cap; dirty contacts. | Replace battery. Tighten tail cap. Clean battery contacts and threads with a clean cloth. |
| Cannot change modes. | Tail switch not being half-pressed correctly. | Ensure a gentle, partial press of the tail switch without a full click to cycle modes. |
વિશિષ્ટતાઓ
| લક્ષણ | વિગત |
|---|---|
| મોડલ | SE-A01 |
| પ્રકાશ સ્ત્રોત | XP-G LED |
| મહત્તમ શક્તિ | 130 લ્યુમેન્સ |
| બીમ અંતર | 40 મીટર |
| મહત્તમ રન સમય | 20 hours (Low mode) |
| મોડ્સ | High, Mid, Low |
| પાવર સ્ત્રોત | 1 x AAA બેટરી |
| સામગ્રી | એલ્યુમિનિયમ |
| પરિમાણો | 8.13 x 1.4 x 1.3 સેમી |
| વજન | 18.14 ગ્રામ (બેટરી વિના) |
| રંગ | કાળો |

છબી: બાજુ view of the Niteye SE-A01, showing the "SE-A01" model engraving and the durable aluminum body.
વોરંટી અને આધાર
The Niteye SE-A01 includes a Warranty Card in its package. Please refer to the terms and conditions specified on the card for details regarding warranty coverage and duration. It is recommended to retain your purchase receipt along with the warranty card for any future claims.
For technical support, service inquiries, or issues not explicitly covered in this manual, please contact the manufacturer or your authorized point of purchase. Provide your product model number and a detailed description of the issue for efficient assistance.

Image: The Niteye SE-A01 standing upright, showcasing its integrated pocket clip for secure carrying and easy access.





