EATON GFCI Self-Test 20A-125V Blank Face Receptacle

1. પરિચય

This manual provides essential information for the safe installation, operation, and maintenance of your EATON GFCI Self-Test 20A-125V Blank Face Receptacle, Model SGFD20W. This device is designed to protect against dangerous electrical shocks caused by ground faults by automatically interrupting the circuit.

2. સલામતી માહિતી

WARNING: Risk of electric shock or electrocution. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.

• Always turn off power at the circuit breaker or fuse box before installing or servicing the GFCI device.
• Use only copper or copper-clad wire. Do not use aluminum wire.
• યોગ્ય ગ્રાઉન્ડિંગની ખાતરી કરો.
• Do not install in circuits exceeding 125V AC.
• યોગ્ય કામગીરીની ખાતરી કરવા માટે GFCI માસિક પરીક્ષણ કરો.
• This device is intended for indoor use or in suitable weatherproof enclosures for outdoor applications.

3. ઉત્પાદન ઓવરview

3.1. ઘટકો

• GFCI Blank Face Receptacle
• Color-matched standard size wallplate
• માઉન્ટિંગ સ્ક્રૂ

3.2. લક્ષણો

• Provides protection from dangerous electrical shocks caused by ground faults.
• Automatically self-tests periodically to ensure GFCI protection and continuous safety.
• Features an "End of Life" lockout and denial of power function, preventing reset if protection is compromised.
• Prevents power delivery if miswired during installation.
• Includes built-in indicator lights for quick notification of tripped or end-of-life conditions.

3.3. Product Diagram (Front View)

છબી 1: આગળ view of the EATON GFCI Blank Face Receptacle, showing the ON/OFF buttons, TEST/RESET buttons, and indicator lights.

4. સેટઅપ અને ઇન્સ્ટોલેશન

4.1. જરૂરી સાધનો

• સ્ક્રુડ્રાઈવર (ફિલિપ્સ અને/અથવા ફ્લેટહેડ)
• વાયર સ્ટ્રીપર્સ
• ભાગtage પરીક્ષક
• ઇલેક્ટ્રિકલ ટેપ (વૈકલ્પિક)

4.2. વાયરિંગ સૂચનાઓ

Before beginning, ensure power is OFF at the circuit breaker.

1. વાયર ઓળખો: Carefully identify the LINE (incoming power) and LOAD (outgoing power to protected devices) wires. Also identify the neutral and ground wires.
2. સ્ટ્રીપ વાયર: Strip approximately 1/2 inch (12.7 mm) of insulation from each wire end.
3. લાઇન વાયર કનેક્ટ કરો: Connect the incoming hot (black) LINE wire to the brass LINE terminal screw and the incoming neutral (white) LINE wire to the silver LINE terminal screw. Tighten securely.
4. લોડ વાયર જોડો (વૈકલ્પિક): If protecting downstream receptacles or devices, connect the outgoing hot (black) LOAD wire to the brass LOAD terminal screw and the outgoing neutral (white) LOAD wire to the silver LOAD terminal screw. Remove the yellow tape covering the LOAD terminals before connecting.
5. ગ્રાઉન્ડ વાયર કનેક્ટ કરો: ખુલ્લા કોપર અથવા લીલા ઇન્સ્યુલેટેડ ગ્રાઉન્ડ વાયરને લીલા ગ્રાઉન્ડ સ્ક્રૂ સાથે જોડો.
6. માઉન્ટ ડિવાઇસ: Carefully fold wires into the electrical box and secure the GFCI device with the provided mounting screws.
7. Install Wallplate: Attach the color-matched wallplate.
8. પાવર પુન Restસ્થાપિત કરો: Turn power back ON at the circuit breaker.

છબી ૨.૧: પાછળ view of the EATON GFCI Blank Face Receptacle, illustrating the LINE and LOAD terminal connections for proper wiring.

5. ઓપરેટિંગ સૂચનાઓ

૪.૩. પ્રારંભિક પાવર-અપ

After installation and restoring power, the GFCI device may be in a tripped state. Press the રીસેટ કરો button to restore power. The indicator light should turn green (or off, depending on model and status).

૬.૩. સ્વ-પરીક્ષણ કાર્ય

The EATON GFCI device automatically performs periodic self-tests to ensure its protective function is operational. During a self-test, the indicator light may briefly change color or flash. This is normal operation.

5.3. Manual Test and Reset

It is recommended to manually test the GFCI monthly.

1. દબાવો ટેસ્ટ button. The GFCI should trip, and power to the protected circuit will be interrupted. The indicator light will typically turn red or off.
2. દબાવો રીસેટ કરો button. Power should be restored, and the indicator light should return to its normal operating state (green or off).
3. If the GFCI does not trip when the ટેસ્ટ button is pressed, or if it does not reset after tripping, it may be faulty or improperly wired. Discontinue use and consult a qualified electrician.

છબી 3: આગળ view of the EATON GFCI Blank Face Receptacle, showing the location of the TEST and RESET buttons for manual operation.

6. જાળવણી

૫. નિયમિત તપાસ

• Perform the manual test (Section 5.3) monthly.
• Visually inspect the device and wallplate for any signs of damage or wear.
• ઉપકરણને સ્વચ્છ અને ધૂળ અને કાટમાળથી મુક્ત રાખો.

6.2. End-of-Life Indication

The GFCI device is equipped with an "End of Life" (EOL) feature. If the device can no longer provide ground fault protection, it will deny power and prevent resetting. The indicator light will typically flash or remain red to signal this condition. If an EOL condition is indicated, the device must be replaced immediately.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

Eaton products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Eaton website. For technical support or assistance, please contact Eaton customer service.

ઈટન Webસાઇટ: www.eaton.com