1. પરિચય
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your KERN PFB 600-2 Precision Laboratory Balance. Please read these instructions carefully before using the device to ensure accurate measurements and prolong its lifespan.
2. સલામતી માહિતી
- Always operate the balance on a stable, level surface free from vibrations.
- Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
- Do not overload the balance beyond its maximum capacity of 600g.
- Keep liquids and corrosive substances away from the balance.
- ફક્ત પ્રદાન કરેલ પાવર એડેપ્ટરનો ઉપયોગ કરો.
3. સેટઅપ
3.1 અનપેકિંગ અને નિરીક્ષણ
Carefully remove the balance from its packaging. Inspect all components for any signs of damage. The package should contain the balance unit, weighing pan, draft shield (if applicable), and power adapter.
This image displays the KERN PFB 600-2 Precision Laboratory Balance. It features a white and blue casing, a circular weighing pan, and a clear glass draft shield. The digital display shows '0.00 g', and control buttons for 'PRINT/ESC', 'MODE', 'PCS', '%', 'TARE', and 'ON/OFF' are visible on the front panel.
૩.૨ પ્લેસમેન્ટ અને લેવલિંગ
- Place the balance on a firm, level, and vibration-free surface.
- Adjust the leveling feet located at the bottom of the balance until the air bubble in the spirit level (usually located near the display) is centered.
3.3 પાવર કનેક્શન
Connect the power adapter to the balance and then plug it into a suitable power outlet. Allow the balance to warm up for at least 30 minutes before initial use for optimal accuracy.
4. ઓપરેટિંગ સૂચનાઓ
4.1 પાવર ચાલુ/બંધ
- દબાવો ચાલુ/બંધ button to turn the balance on.
- દબાવો અને પકડી રાખો ચાલુ/બંધ button to turn the balance off.
૬.૨ મૂળભૂત વજન
- Ensure the balance is level and the display shows '0.00 g'. If not, press the તારે ડિસ્પ્લેને શૂન્ય કરવા માટે બટન.
- Carefully place the item to be weighed onto the center of the weighing pan.
- Read the stable weight value displayed.
4.3 તારે કાર્ય
The tare function allows you to weigh items in a container without including the container's weight.
- ખાલી કન્ટેનરને વજન તવા પર મૂકો.
- દબાવો તારે button. The display will show '0.00 g'.
- Add the substance to be weighed into the container. The display will show only the net weight of the substance.
4.4 એકમ રૂપાંતર
દબાવો મોડ button to cycle through available weighing units (e.g., grams, ounces, pounds, carats, etc.). The active unit will be indicated on the display.
૫.૪ ગણતરી કાર્ય (PCS)
This function allows for counting a large number of identical items.
- Place a known quantity of items (e.g., 10, 20, 50, 100 pieces) on the pan.
- દબાવો પીસીએસ બટન. ડિસ્પ્લે તમને s પસંદ કરવા માટે સંકેત આપશેampલે કદ.
- નો ઉપયોગ કરો મોડ or % buttons to select the corresponding sample size (e.g., P10 for 10 pieces).
- દબાવો પીસીએસ again to confirm. The balance is now in counting mode.
- Add more items, and the display will show the total count.
4.6 ટકાtage Weighing (%)
This function allows you to determine the percentage of a sample relative to a reference weight.
- સંદર્ભ s મૂકોampલે વજન તવા પર.
- દબાવો % button. The display will show '100.00%'.
- સંદર્ભ s દૂર કરોample અને s મૂકોample to be measured. The display will show its weight as a percentage of the reference sample
4.7 Print Function
If connected to a compatible printer or PC, pressing the PRINT/ESC button will send the current weighing data to the connected device.
5. જાળવણી
5.1 સફાઈ
- સફાઈ કરતા પહેલા હંમેશા પાવરને ડિસ્કનેક્ટ કરો.
- Wipe the balance exterior with a soft, damp કાપડ. જો જરૂરી હોય તો હળવા ડિટરજન્ટનો ઉપયોગ કરો.
- Do not use abrasive cleaners, solvents, or immerse the balance in water.
- Clean the weighing pan regularly to prevent accumulation of dust or debris.
5.2 સંગ્રહ
When not in use for extended periods, store the balance in a dry, dust-free environment at room temperature. Ensure the draft shield is in place to protect the weighing mechanism.
5.3 પુનઃપ્રાપ્તિ
Periodic calibration with certified weights is recommended to maintain accuracy. Refer to the balance's specific calibration procedure in the full technical manual or contact KERN support for guidance.
6. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Display shows 'Err' or 'Overload' | વજન મહત્તમ ક્ષમતા કરતાં વધી જાય છે. | Remove excess weight. |
| અચોક્કસ વાંચન | Balance not level, vibrations, temperature fluctuations, need for calibration. | Check leveling, move to stable surface, allow warm-up, perform calibration. |
| ડિસ્પ્લે ચાલુ થતું નથી | No power, faulty adapter. | Check power connection, try a different outlet, verify adapter functionality. |
| Display shows '0.00' but weight is on pan | Tare function was activated with item on pan. | Remove item, press તારે to zero, then re-weigh. |
7. સ્પષ્ટીકરણો
| લક્ષણ | વિગત |
|---|---|
| મોડલ નંબર | PFB 600-2 |
| મહત્તમ ક્ષમતા | 600 ગ્રામ |
| ઉત્પાદન પરિમાણો | 12.4 x 8.27 x 3.54 ઇંચ |
| વસ્તુનું વજન | 4.41 પાઉન્ડ |
| ડિસ્પ્લે પ્રકાર | ડિજિટલ |
| ખાસ લક્ષણો | High Precision, High Weight Capacity, Digital Display |
| ભલામણ કરેલ ઉપયોગો | Laboratory/Scientific Applications, Jewellery |
8. વોરંટી માહિતી
KERN products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official KERN webસાઇટ. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
9. આધાર
For technical assistance, service, or further inquiries regarding your KERN PFB 600-2 Precision Laboratory Balance, please contact KERN customer support. Contact details can typically be found on the KERN official webસાઇટ અથવા તમારી ખરીદી સાથે પ્રદાન કરેલા દસ્તાવેજોમાં.
