WORX WX082L 4V ZipSnip કોર્ડલેસ ઇલેક્ટ્રિક સિઝર્સ વપરાશકર્તા માર્ગદર્શિકા

પરિચય

The WORX WX082L 4V ZipSnip Cordless Electric Scissors are designed for effortless cutting of various materials, reducing hand strain compared to traditional scissors. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your new tool.

સલામતી માહિતી

• Always ensure the tool is switched off and the safety lock is engaged when not in use or during maintenance.
• Keep hands and fingers away from the rotating blade during operation.
• Wear appropriate personal protective equipment, such as cut-resistant gloves, especially when handling or replacing the blade.
• Do not attempt to cut materials beyond the tool's specified capacity.
• Keep the tool dry and away from moisture.

પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

• WORX WX082L 4V ZipSnip કોર્ડલેસ ઇલેક્ટ્રિક સિઝર્સ
• Cutting blade (pre-installed)
• ચાર્જર

ઉત્પાદન ઓવરview

Familiarize yourself with the components of your ZipSnip tool:

1. કટીંગ બ્લેડ: The rotating blade for cutting materials.
2. બ્લેડ ગાર્ડ: Provides protection and guides the blade along the cutting surface.
3. ટ્રિગર: Activates the cutting blade when pressed.
4. Lock-out Switch: A safety mechanism that must be engaged before the trigger can activate the blade.
5. ચાર્જિંગ પોર્ટ: Connects the charger to the tool.
6. બેટરી સૂચક પ્રકાશ: વર્તમાન બેટરી ચાર્જ સ્તર દર્શાવે છે.

સેટઅપ

બેટરી ચાર્જ કરી રહી છે

The WORX WX082L is equipped with an internal 4V MaxLithium battery. Before first use, or when the battery indicator shows low charge, fully charge the tool.

1. ખાતરી કરો કે સાધન બંધ છે.
2. Connect the included charger to the charging port on the tool (refer to Figure 4).
3. ચાર્જરને પ્રમાણભૂત પાવર આઉટલેટમાં પ્લગ કરો.
4. The battery indicator light will illuminate to show charging status. Charge until the indicator shows a full charge.
5. Once fully charged, disconnect the charger from the tool and the power outlet.

ઓપરેટિંગ સૂચનાઓ

સામાન્ય કામગીરી

The ZipSnip is designed for cutting various materials such as cardboard, plastic packaging, fabric, leather, and more. Its compact design and lightweight nature (approximately 0.86 lbs) make it easy to maneuver.

1. સામગ્રી તૈયાર કરો: Place the material to be cut on a stable, flat surface.
2. સાધનને પકડો: Hold the ZipSnip firmly with one hand, ensuring a comfortable and secure grip.
3. સલામતીમાં જોડાઓ: Press the lock-out switch (Figure 3) with your thumb.
4. Activate Blade: While holding the lock-out switch, press the trigger to start the rotating blade.
5. કાપવાનું શરૂ કરો: Guide the tool along the desired cutting line. The flat surface of the blade guard helps maintain a straight cut.
6. પ્રકાશન: Release the trigger to stop the blade. The safety lock will automatically re-engage.

Cutting Different Materials

The ZipSnip is versatile and can handle various materials. For optimal results, ensure the material is laid flat and stable.

જાળવણી

બ્લેડ રિપ્લેસમેન્ટ

Over time, the blade may become dull despite its self-sharpening feature. Replace the blade when cutting performance diminishes.

1. Ensure the tool is switched off and the safety lock is engaged.
2. Wear cut-proof gloves for safety.
3. Use a flat-head screwdriver to loosen the screw on the blade counterclockwise.
4. જૂના બ્લેડને કાળજીપૂર્વક દૂર કરો.
5. Align the new replacement blade with the electric scissors head hole.
6. Tighten the blade screw clockwise until secure.

સફાઈ

After each use, clean the blade and surrounding area to remove any debris or material residue. Use a dry cloth or soft brush. Do not use harsh chemicals or abrasive materials.

મુશ્કેલીનિવારણ

• ટૂલ ચાલુ નથી થઈ રહ્યું: Ensure the battery is fully charged. Verify that both the lock-out switch and the trigger are pressed simultaneously.
• નબળી કટીંગ કામગીરી: The blade may be dull and require replacement. Check for any material buildup around the blade that might be obstructing its movement.
• બેટરી ચાર્જ થઈ રહી નથી: Ensure the charger is properly connected to both the tool and a working power outlet. Check the charger cable for damage.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

The WORX WX082L 4V ZipSnip Cordless Electric Scissors come with a ૧ વર્ષની ઉત્પાદકની વોરંટી.

For technical support, warranty claims, or to purchase replacement parts, please contact Worx customer service or visit their official webસાઇટ. ચોક્કસ સંપર્ક વિગતો માટે તમારા ઉત્પાદન પેકેજિંગનો સંદર્ભ લો.