ઇન્ટરમેક PM43 ડાયરેક્ટ થર્મલ/થર્મલ ટ્રાન્સફર પ્રિન્ટર યુઝર મેન્યુઅલ

1. પરિચય

The Intermec PM43 is a mid-range industrial label printer designed for reliable performance and ease of use. This printer supports both direct thermal and thermal transfer printing methods, making it versatile for various labeling applications. It features a user-friendly interface, available with either a color touch-screen or universal icons, to simplify operation and reduce training requirements. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PM43 printer.

આકૃતિ 1: ફ્રન્ટ view of the Intermec PM43 printer, showing the control panel and media output slot.

2. સેટઅપ

2.1 અનપેકિંગ અને પ્લેસમેન્ટ

Carefully remove the printer from its packaging. Ensure all packing materials are removed. Place the printer on a stable, flat surface with adequate space around it for ventilation and access to ports and media loading areas.

2.2 કનેક્ટિંગ પાવર

1. Ensure the printer's power switch is in the OFF (O) position.
2. Connect the power cord to the printer's AC inlet.
3. પાવર કોર્ડના બીજા છેડાને ગ્રાઉન્ડેડ ઇલેક્ટ્રિકલ આઉટલેટમાં પ્લગ કરો.

2.3 Connecting to a Host System

The PM43 printer supports USB and Ethernet connectivity.

• યુએસબી કનેક્શન: પ્રિન્ટરના USB પોર્ટમાંથી USB કેબલને તમારા કમ્પ્યુટર પર ઉપલબ્ધ USB પોર્ટ સાથે કનેક્ટ કરો.
• ઈથરનેટ કનેક્શન: પ્રિન્ટરના ઇથરનેટ પોર્ટમાંથી ઇથરનેટ કેબલને તમારા નેટવર્ક રાઉટર અથવા સ્વિચ સાથે કનેક્ટ કરો.

Figure 2: Rear panel of the PM43 printer, illustrating the power inlet, power switch, USB ports, and Ethernet port.

૨ મીડિયા લોડ કરી રહ્યું છે

The PM43 printer can use various media types, including labels, tags, and continuous media. For thermal transfer printing, a ribbon is also required.

1. Open the printer's media cover.
2. Place the roll of labels onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
3. Thread the media through the guides and under the printhead assembly.
4. If using thermal transfer, load the ribbon onto the ribbon supply spindle and thread it according to the internal diagrams.
5. મીડિયા કવર બંધ કરો.

આકૃતિ 3: આંતરિક view of the PM43 printer, highlighting the media and ribbon loading mechanisms.

3. ઓપરેટિંગ સૂચનાઓ

3.1 પાવરિંગ ચાલુ/બંધ

• To power on, flip the power switch on the rear panel to the ON (I) position. The printer will perform a self-test.
• To power off, flip the power switch to the OFF (O) position.

3.2 મૂળભૂત છાપકામ

Once the printer is connected and media is loaded, you can send print jobs from your host system. Ensure the correct printer drivers are installed on your computer.

1. તમે જે દસ્તાવેજ અથવા એપ્લિકેશનમાંથી પ્રિન્ટ કરવા માંગો છો તે ખોલો.
2. Select the Intermec PM43 printer from the print dialog.
3. Adjust print settings (e.g., label size, print density) as needed.
4. છાપવાનું કામ શરૂ કરો.

3.3 Using the User Interface

The PM43 features either a color touch-screen or a universal-icon interface for direct control and configuration. Navigate through menus to adjust settings such as media calibration, network configuration, and printer status.

4. જાળવણી

4.1 Cleaning the Printhead

Regular cleaning of the printhead is crucial for maintaining print quality and extending the printhead's lifespan. Use a lint-free cloth or a printhead cleaning pen with isopropyl alcohol.

1. Power off the printer and disconnect the power cord.
2. મીડિયા કવર ખોલો.
3. Gently wipe the printhead element from the center outwards.
4. Allow the printhead to dry completely before closing the cover and powering on the printer.

4.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Refer to section 2.4 for loading instructions. Always ensure the correct media and ribbon types are used for optimal performance.

5. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your PM43 printer.

૫.૩ નબળી પ્રિન્ટ ગુણવત્તા

• Faded or incomplete print: Clean the printhead (see section 4.1). Ensure the ribbon (if thermal transfer) is correctly loaded and not depleted. Adjust print density settings.
• Smudged print: Verify media type is compatible. Ensure printhead pressure is correctly set.

5.2 Media Jams

• પ્રિન્ટરને પાવર ઓફ કરો.
• Open the media cover and carefully remove any jammed media.
• Ensure media is loaded correctly and guides are properly adjusted.
• Close the cover and power on.

૭.૩ કનેક્ટિવિટી સમસ્યાઓ

• Printer not detected: Check all cable connections (USB/Ethernet). Restart the printer and host system. Verify driver installation.
• નેટવર્ક સમસ્યાઓ: Confirm network cable is connected. Check network settings on the printer and host system.

6. સ્પષ્ટીકરણો

The following table outlines the key technical specifications for the Intermec PM43 printer.

Figure 4: Regulatory and compliance labels found on the Intermec PM43 printer.

7. વોરંટી માહિતી

The Intermec PM43 printer is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec support webસાઇટ

8. આધાર

For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Intermec support website or contact your authorized Intermec dealer. Ensure you have your printer's model number (PM43A01000000201) and serial number available when seeking support.