LC-Power LC-DOCK-U3-III USB 3.0 ડ્યુઅલ બે HDD ડોકિંગ સ્ટેશન વપરાશકર્તા માર્ગદર્શિકા

1. ઓવરview

The LC-Power LC-DOCK-U3-III is a versatile USB 3.0 dual bay docking station designed for 2.5-inch and 3.5-inch SATA HDDs/SSDs. It provides a convenient solution for accessing multiple hard drives, data backup, and disk cloning without the need for a computer connection. This manual provides detailed instructions for setup, operation, and maintenance of your docking station.

છબી 1.1: આગળ view of the LC-Power LC-DOCK-U3-III Docking Station, showing two drive bays and LED indicators.

2. ઉત્પાદન સુવિધાઓ

• Supports two 2.5-inch or 3.5-inch SATA I/II/III HDDs/SSDs simultaneously.
• USB 3.0 interface for high-speed data transfer (up to 5 Gbps).
• યુએસબી 2.0 સાથે બેકવર્ડ સુસંગત.
• Standalone clone function (computer-independent disk duplication).
• LED indicators for power, activity, and cloning progress.
• Plug & Play functionality, no driver installation required for most operating systems.
• Windows, macOS અને Linux ઓપરેટિંગ સિસ્ટમ સાથે સુસંગત.

3. પેકેજ સામગ્રી

કૃપા કરીને નીચેની વસ્તુઓ માટે પેકેજ તપાસો:

• LC-Power LC-DOCK-U3-III Docking Station
• યુએસબી 3.0 કેબલ
• પાવર એડેપ્ટર
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

Image 3.1: Retail packaging of the LC-Power LC-DOCK-U3-III, showing the product and key features.

4. સેટઅપ સૂચનાઓ

Follow these steps to set up your docking station:

1. પાવર કનેક્ટ કરો: Connect the included power adapter to the DC 12V port on the back of the docking station and then plug it into a power outlet.
2. Connect to Computer (Optional for cloning): Connect the USB 3.0 cable from the docking station's USB 3.0 port to an available USB 3.0 port on your computer. If your computer only has USB 2.0 ports, the device will still function but at USB 2.0 speeds.
3. હાર્ડ ડ્રાઈવો દાખલ કરો:
   • Ensure the docking station is powered off (ON/OFF switch in OFF position).
   • Carefully insert your 2.5-inch or 3.5-inch SATA HDDs/SSDs into the drive bays. Ensure they are firmly seated.
4. પાવર ચાલુ: Flip the ON/OFF switch on the back of the docking station to the ON position. The power LED will illuminate.

Image 4.1: Rear panel of the docking station, highlighting the USB 3.0 port, DC 12V power input, and ON/OFF switch.

છબી ૪.૧: ઉદાહરણample of 2.5-inch and 3.5-inch hard drives correctly inserted into the docking station bays.

5. ઓપરેટિંગ સૂચનાઓ

5.1. Data Transfer Mode (Connected to Computer)

1. Ensure the docking station is connected to your computer via the USB 3.0 cable and powered on.
2. Insert one or two SATA HDDs/SSDs into the bays.
3. Your operating system should automatically detect the drives. They will appear as removable storage devices.
4. You can now access, read, and write data to the drives as you would with any other external storage.
5. મહત્વપૂર્ણ: Always use the "Safely Remove Hardware" option in your operating system before disconnecting the docking station or removing drives to prevent data corruption.

5.2. Standalone Clone Function

The cloning function allows you to duplicate a source drive to a target drive without a computer connection. The target drive must be equal to or larger than the source drive's capacity.

1. તૈયારી:
   • Ensure the docking station is powered off and disconnected from the computer.
   • દાખલ કરો સ્રોત ડ્રાઇવ (જે ડ્રાઇવ તમે FROM કોપી કરવા માંગો છો) માં HDD1 (Source) ખાડી
   • દાખલ કરો ટાર્ગેટ ડ્રાઇવ (જે ડ્રાઇવને તમે TO કોપી કરવા માંગો છો) માં HDD2 (Target) ખાડી
   • Verify that the target drive has equal or greater capacity than the source drive. All data on the target drive will be overwritten.
2. ક્લોનિંગ શરૂ કરો:
   • ડૉકિંગ સ્ટેશન પર પાવર.
   • Press and hold the "Clone" button (often labeled "One Touch Clone" or similar) for approximately 3-5 seconds until the cloning progress LEDs begin to flash.
   • Release the button. The cloning process will begin.
3. મોનિટર પ્રોગ્રેસ: The LED indicators (e.g., 25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
4. પૂર્ણતા: એકવાર બધા પ્રોગ્રેસ LED મજબૂત થઈ જાય, પછી ક્લોનિંગ પ્રક્રિયા પૂર્ણ થાય છે.
5. Power Off and Remove: Power off the docking station before removing the drives.

Warning: Do not interrupt the cloning process. Doing so may result in data loss or corruption on both drives.

6. જાળવણી

• સફાઈ: Use a soft, dry cloth to clean the exterior of the docking station. Do not use liquid cleaners or solvents.
• સંગ્રહ: જ્યારે ઉપયોગમાં ન હોય, ત્યારે ડોકિંગ સ્ટેશનને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
• હેન્ડલિંગ: Handle the docking station and hard drives with care to avoid physical damage. Avoid dropping or subjecting the device to strong impacts.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. સલામતી માહિતી

• Do not expose the device to moisture, dust, or extreme temperatures.
• ફક્ત આપેલા પાવર એડેપ્ટરનો ઉપયોગ કરો. અનધિકૃત એડેપ્ટરનો ઉપયોગ કરવાથી ઉપકરણને નુકસાન થઈ શકે છે અને વોરંટી રદ થઈ શકે છે.
• ઉપકરણને જાતે ડિસએસેમ્બલ કરવાનો કે રિપેર કરવાનો પ્રયાસ કરશો નહીં. બધી સર્વિસિંગ લાયક કર્મચારીઓને સોંપો.
• ઉપકરણને મજબૂત ચુંબકીય ક્ષેત્રોથી દૂર રાખો.
• ઓપરેશન દરમિયાન ઉપકરણની આસપાસ યોગ્ય વેન્ટિલેશનની ખાતરી કરો.

10. વોરંટી અને સપોર્ટ

LC-Power products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official LC-Power website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact LC-Power customer service through their official channels.

LC-Power Official Webસાઇટ: www.lc-power.com