Trophy Ridge Fix Series 5 Pin Sight Instruction Manual

1. પરિચય

This manual provides comprehensive instructions for the proper installation, adjustment, operation, and maintenance of your Trophy Ridge Fix Series 5 Pin Bow Sight. Designed for precision and durability, this sight enhances your archery experience by providing clear aiming points and robust adjustability. Please read this manual thoroughly before use to ensure optimal performance and safety.

આકૃતિ 1.1: The Trophy Ridge Fix Series 5 Pin Sight, showcasing its robust design and fiber optic pins.

2. સલામતી માહિતી

Always prioritize safety when handling archery equipment. Adhere to the following guidelines:

• Ensure the sight is securely mounted to your bow before shooting.
• ઘસારો કે નુકસાન માટે બધા ઘટકોનું નિયમિતપણે નિરીક્ષણ કરો. જો નુકસાન થયું હોય તો ઉપયોગ કરશો નહીં.
• Always point your bow in a safe direction.
• Wear appropriate eye protection when shooting.
• ગોઠવણ દરમિયાન આંગળીઓને ફરતા ભાગોથી દૂર રાખો.

3. સેટઅપ અને ઇન્સ્ટોલેશન

3.1 Mounting the Sight

The Trophy Ridge Fix Series sight offers multiple mounting positions for optimal fit and balance on your bow.

આકૃતિ 3.1: The sight base illustrating the four available mounting positions for attachment to your bow's riser.

માઉન્ટ કરવા માટે:

1. Align the sight's mounting bracket with the threaded holes on your bow's riser.
2. Insert the mounting screws (typically two) and hand-tighten them.
3. Adjust the sight along the riser to your preferred position, then securely tighten the screws using an appropriate hex key.

3.2 Windage and Elevation Adjustments

The Fix Series sight features tool-less micro-adjustments for both windage and elevation, allowing for precise tuning.

આકૃતિ 3.2: Diagram showing the windage and elevation adjustment knobs, enabling fine-tuning without additional tools.

• ઉંચાઈ: Use the vertical adjustment knob to move the pin housing up or down. Turn clockwise to move pins down, counter-clockwise to move pins up.
• વિન્ડેજ: Use the horizontal adjustment knob to move the pin housing left or right. Turn clockwise to move pins right, counter-clockwise to move pins left.
• Each click of the micro-adjustment provides a small, precise change.

3.3 Second-Axis Leveling

Proper second-axis leveling is crucial for accuracy, especially at longer distances. The sight includes a precision-installed bubble level.

આકૃતિ 3.3: વિસ્ફોટ થયો view highlighting the second-axis leveling mechanism and other key components like the bubble level and rheostat light.

To adjust the second axis:

1. Place your bow in a bow vice or hold it steady.
2. Ensure the bow is perfectly plumb (vertical) using a separate level on the riser.
3. Adjust the second-axis screw (refer to Figure 3.3 for location) until the bubble in the sight's level is centered.
4. Tighten the locking screw once adjusted.

4. Operating the Sight

4.1 Pin Brightness and Rheostat Light

The Fix Series sight features ultra-bright fiber optic pins and a rheostat light for enhanced visibility in varying light conditions.

આકૃતિ 4.1: Close-up of the sight pins and the rheostat light, which illuminates the fiber optics for low-light conditions.

• The fiber optic pins gather ambient light to provide bright, clear aiming points.
• The rheostat light (if equipped) allows you to adjust the brightness of the pins in low-light environments. Turn the knob to increase or decrease illumination.
• A green hood accent ring helps to frame the sight picture and reduce glare.

4.2 On-Board Adjustment Tool

An integrated adjustment tool is conveniently stored on the sight, allowing for field adjustments without carrying extra tools.

આકૃતિ 4.2: The on-board tool, used for modifying pins, second-axis leveling, and tightening windage and elevation locking nuts.

This tool can be used for:

• Pin adjustments (e.g., moving individual pins).
• Second-axis leveling.
• Tightening windage and elevation locking nuts after adjustments are made.

5. જાળવણી

To ensure the longevity and performance of your Trophy Ridge Fix Series sight, follow these maintenance tips:

• સફાઈ: Wipe down the sight with a soft, dry cloth after each use to remove dirt and debris. Avoid harsh chemicals.
• નિરીક્ષણ: Periodically check all screws and fasteners to ensure they are tight. Inspect the fiber optic pins for any damage or fraying.
• સંગ્રહ: Store the sight in a cool, dry place, protected from extreme temperatures and direct sunlight.
• લુબ્રિકેશન: Do not lubricate any part of the sight unless specifically instructed by the manufacturer.

6. મુશ્કેલીનિવારણ

7. સ્પષ્ટીકરણો

• મોડલ નંબર: AS905
• પિનની સંખ્યા: 5
• Pin Size: .019 (standard for Trophy Ridge Fix Series)
• ગોઠવણો: Tool-less micro windage and elevation
• સ્તરીકરણ: Second-axis adjustable, precision-installed bubble level
• રોશની: Ultra-bright fiber optic pins, Rheostat light (battery not included)
• માઉન્ટિંગ પોઝિશન્સ: 4
• પરિમાણો (L x W x H): આશરે 27.69 x 12.19 x 10.92 સેમી (11 x 5 x 4 ઇંચ)
• વજન: આશરે 0.28 કિગ્રા (0.62 lbs)
• યુપીસી: 754806236025

8. વોરંટી અને સપોર્ટ

Trophy Ridge products are built with quality and durability in mind. For specific warranty information and support, please refer to the official Trophy Ridge webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો.

ગ્રાહક આધાર: For technical assistance, replacement parts, or warranty claims, please visit the official Trophy Ridge website or contact their customer support line. Keep your purchase receipt and product model number (AS905) handy when contacting support.