Orno CR-243 Ceiling Motion Sensor User Manual

1. પરિચય

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Orno CR-243 Ceiling Motion Sensor. The Orno CR-243 is an indoor, 360-degree infrared motion detector designed for ceiling mounting, offering adjustable time and light sensitivity settings to automate lighting and other electrical devices up to 800W. It is ideal for energy saving and enhancing security in various indoor environments.

આકૃતિ 1: ફ્રન્ટ view of the Orno CR-243 Ceiling Motion Sensor, showing its compact, white circular design with the translucent detection dome at the center.

2. સલામતી માહિતી

Please read this section carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• ઇલેક્ટ્રિકલ સલામતી: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the circuit breaker before installing or servicing the device.
• ભાગtage: This device operates on 230 Volts AC. Ensure the power supply matches the device's requirements.
• ફક્ત આંતરિક ઉપયોગ: The Orno CR-243 is designed for indoor use only. Do not expose it to moisture, rain, or extreme temperatures. Its IP20 ingress protection rating means it is protected against solid objects larger than 12.5mm, but has no protection against water.
• લોડ ક્ષમતા: Do not exceed the maximum load capacity of 800 Watts. Overloading can cause damage to the sensor and connected devices, and poses a fire risk.
• માઉન્ટ કરવાનું: Ensure the mounting surface is stable and can support the device securely.

3. ઉત્પાદન સુવિધાઓ

The Orno CR-243 motion sensor offers a range of features designed for efficient and reliable operation:

• 360-Degree Detection: Provides comprehensive coverage of an entire room from a single mounting point.
• એડજસ્ટેબલ સમય સેટિંગ: Allows users to set the duration for which the connected device remains active after motion detection, ranging from approximately 10 seconds to 15 minutes.
• Adjustable Light Sensitivity (LUX): Enables the sensor to operate only in low light conditions (e.g., evening/night) or continuously, regardless of ambient light, with a range from 3 LUX to 2000 LUX.
• ઊર્જા બચત: Automates lighting or other devices, ensuring they are only active when needed, leading to reduced energy consumption.
• વ્યાપક સુસંગતતા: Compatible with various light sources including LED, energy-saving lamps, and incandescent bulbs, with a maximum load of 800W.
• ઇન્ફ્રારેડ ટેકનોલોજી: Utilizes passive infrared (PIR) technology to detect heat signatures of moving objects.

Figure 2: Diagram illustrating key features of the Orno CR-243, including 360° detection angle, IP20 ingress protection, infrared sensor type, and 800W maximum load.

4. પેકેજ સામગ્રી

અનપેક કરતી વખતે, કૃપા કરીને ખાતરી કરો કે બધી વસ્તુઓ હાજર છે અને તેને નુકસાન થયું નથી:

• 1 x Orno CR-243 Ceiling Motion Sensor
• ૧ x વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

5. સેટઅપ અને ઇન્સ્ટોલેશન

The Orno CR-243 is designed for ceiling mounting. Follow these steps for proper installation:

1. પાવર ડિસ્કનેક્શન: Before starting any electrical work, ensure the main power supply to the installation area is turned off at the circuit breaker. Verify with a voltage પરીક્ષક.
2. માઉન્ટ કરવાનું સ્થાન પસંદ કરો: Select a suitable indoor ceiling location that provides the desired detection coverage. Avoid placing near heat sources, air conditioning vents, or direct sunlight, as these can interfere with sensor performance.
3. ઉદઘાટનની તૈયારી: Create a circular opening in the ceiling with a diameter of approximately 60-70mm (refer to dimensions in Figure 3).
4. વાયરિંગ: Connect the power supply wires to the sensor's terminals as indicated on the device (typically L for Live, N for Neutral, and L' for Switched Live/Load). Ensure all connections are secure.
5. માઉન્ટ કરવાનું: Gently push the sensor into the prepared ceiling opening. The spring-loaded clips on the sides of the sensor will secure it in place.
6. પાવર રિસ્ટોરેશન: એકવાર ઇન્સ્ટોલેશન પૂર્ણ થઈ જાય અને બધા કનેક્શન સુરક્ષિત થઈ જાય, પછી સર્કિટ બ્રેકર પર પાવર પુનઃસ્થાપિત કરો.

Figure 3: Dimensional drawing of the Orno CR-243, showing a diameter of 8 cm (3.15 in) and a height of 6.14 cm (2.42 in), crucial for ceiling cutout preparation.

આકૃતિ 4: પાછળ view of the Orno CR-243, displaying the wiring terminals (L, N, L') and the spring-loaded mounting clips used for ceiling installation.

6. ઓપરેટિંગ સૂચનાઓ

The Orno CR-243 features two adjustable dials for customizing its operation: TIME and LUX.

આકૃતિ 5: ટોચ view of the Orno CR-243, clearly showing the "TIME" and "LUX" adjustment dials on the sensor's face.

• સમય ગોઠવણ:

  This dial controls how long the connected light or device remains on after motion is detected and no further motion is sensed. Turn the dial to set the desired delay:

  • 10 સે: આશરે 10 સેકન્ડ
  • 30 સે: આશરે 30 સેકન્ડ
  • 90 સે: આશરે 90 સેકન્ડ
  • 3 મિનિટ: લગભગ 3 મિનિટ
  • 7 મિનિટ: લગભગ 7 મિનિટ
  • 15 મિનિટ: લગભગ 15 મિનિટ

  નોંધ: The timer resets with each new motion detection. If motion is continuously detected, the light will remain on.
• LUX એડજસ્ટમેન્ટ:

  This dial determines the ambient light level at which the sensor will activate. This allows you to choose whether the sensor operates during the day, night, or only in low-light conditions.

  • Sun icon (Max LUX / 2000 LUX): The sensor will operate regardless of ambient light, activating both during the day and night.
  • Moon icon (Min LUX / 3 LUX): The sensor will only activate when the ambient light level falls below a certain threshold, typically at dusk or in dark conditions.

  Adjust this setting to suit your specific needs and energy-saving goals.

7. જાળવણી

The Orno CR-243 motion sensor requires minimal maintenance.

• સફાઈ: Periodically wipe the sensor's detection dome and housing with a soft, dry cloth to remove dust and dirt. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
• કોઈ વપરાશકર્તા-સેવાયોગ્ય ભાગો નથી: The device contains no user-serviceable parts. Do not attempt to open or repair the sensor yourself. Any unauthorized tampering વોરંટી રદ કરશે.
• નિરીક્ષણ: Occasionally inspect the wiring and mounting for any signs of damage or loosening. If any issues are found, disconnect power and consult a qualified electrician.

8. મુશ્કેલીનિવારણ

If you experience issues with your Orno CR-243 motion sensor, refer to the following common problems and solutions:

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information or technical support regarding your Orno CR-243 Ceiling Motion Sensor, please contact the manufacturer or your point of purchase.

ઉત્પાદક: AW-Tools / Orno
Webસાઇટ: www.orno.pl

Figure 6: Product label showing manufacturer details (Orno-Logistic Sp. z o.o., ul. Rolników 437, 44-141 Gliwice POLAND, www.orno.pl), CE mark, recycling symbols, and the product barcode (UPC: 5901752485105).